Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures About Market Risk
Financial Statements and Supplementary Data
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
Controls and Procedures
Other Information
Disclosures Regarding Foreign Jurisdictions that Prevent Inspections
PART III
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships and Related Transactions, and Director Independence
Principal Accounting Fees and Services
PART IV
Exhibits and Financial Statement Schedule
Form 10-K Summary
Exhibit Index
Signatures
Included pursuant to the General Instruction to Item 401 of Regulation S-K.
WHERE YOU CAN FIND MORE INFORMATION
We file annual, quarterly and current reports, proxy statements and other information with the U.S. Securities and Exchange Commission (the "SEC"). The SEC maintains a website at www.sec.gov on which you may access our SEC filings. In addition, we make available free of charge at investors.itt.com copies of materials we file with, or furnish to, the SEC as soon as reasonably practical after we electronically file or furnish these reports, as well as other important information that we disclose from time to time. In addition, in certain sections of this Annual Report on Form 10-K we refer readers to additional information that is contained on our website, or that can be accessed through our website. The information on our website, including the materials we are specifically referencing, do not constitute a part of this Annual Report on Form 10-K. We have included our website address only as an inactive textual reference and do not intend it to be an active link to our website.
Our corporate headquarters is located at 100 Washington Boulevard, 6th Floor, Stamford, Connecticut 06902 and the telephone number of this location is (914) 641-2000.
FORWARD-LOOKING AND CAUTIONARY STATEMENTS
Some of the information included herein includes forward-looking statements within the meaning of the Securities Exchange Act of 1933, and the Securities Exchange Act of 1934, as amended. We intend such forward-looking statements to qualify for the safe harbor from liability established by the Private Securities Litigation Reform Act of 1995. These forward-looking statements are not historical facts, but rather represent only a belief regarding future events based on current expectations, estimates, assumptions and projections about our business, future financial results, the industry in which we operate, and other legal, regulatory and economic developments. These forward-looking statements include, but are not limited to, future strategic plans, statements regarding closing of the acquisition of SPX FLOW, Inc. ("SPX FLOW") and the payment of the purchase price, the debt financing, the impact of the acquisition on ITT, expected cost synergies of the acquisition, and other statements that describe the company’s business strategy, outlook, objectives, plans, intentions or goals, and any discussion of future events and future operating or financial performance.
We use words such as “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “future,” “guidance,” “intend,” “may,” “plan,” “potential,” “project,” “should,” “target,” “will,” “would,” and other similar expressions to identify such forward-looking statements. Forward-looking statements are uncertain and, by their nature, many are inherently unpredictable and outside of ITT’s control, and involve known and unknown risks, uncertainties and other important factors that could cause actual results to differ materially from those expressed or implied in, or reasonably inferred from, such forward-looking statements.
Where in any forward-looking statement we express an expectation or belief as to future results or events, such expectation or belief is based on current plans and expectations of our management, expressed in good faith and believed to have a reasonable basis. However, we cannot provide any assurance that the expectation or belief will occur or that anticipated results will be achieved or accomplished.
Among the factors that could cause our results to differ materially from those indicated by forward-looking statements are risks and uncertainties inherent in our business including, without limitation:
• potential delays in consummating the pending acquisition of SPX FLOW;
• our ability to integrate the operations of SPX FLOW in a successful manner and in the expected time period;
• the possibility that any of the anticipated benefits and projected synergies of the pending acquisition of SPX FLOW will not be realized or will not be realized on the anticipated terms within the expected time period;
• the occurrence of any event, change, or other circumstance that could give rise to the termination of the purchase agreement for the pending acquisition of SPX FLOW;
• the effect of the pendency or completion of the pending acquisition of SPX FLOW on the parties' business relationships and business generally;
• uncertain global economic and capital markets conditions, which have been influenced by heightened geopolitical tensions, inflation, changes in monetary policies, the threat of a possible regional or global economic recession, trade disputes between the U.S. and its trading partners, political and social unrest, and the availability and fluctuations in prices of energy and commodities, including steel, oil, copper and tin;
• the imposition of new or increased tariffs by the U.S. government, particularly those targeting imports from specific countries, and the potential for retaliatory trade measures by affected countries, which could disrupt global supply chains, increase costs and reduce customer demand;
• fluctuations in interest rates and the impact of such fluctuations on customer behavior and on our cost of debt;
• fluctuations in foreign currency exchange rates and the impact of such fluctuations on our revenues, customer demand for our products and on our hedging arrangements;
• volatility in raw material prices and our suppliers’ ability to meet quality and delivery requirements;
• impacts and risk of liabilities from recent mergers, acquisitions, or venture investments, including the pending acquisition of SPX FLOW, and past divestitures and spin-offs;
• our inability to hire or retain key personnel;
• failure to compete successfully and innovate in our markets;
• failure to manage the distribution of products and services effectively;
• failure to protect our intellectual property rights or violations of the intellectual property rights of others;
• the extent to which there are quality problems with respect to manufacturing processes or finished goods;
• the risk of cybersecurity breaches or failure of any information systems used by the Company, including any flaws in the implementation of any enterprise resource planning systems;
• loss of or decrease in sales from our most significant customers;
• risks due to our operations and sales outside the U.S. and in emerging markets, including the imposition of tariffs and trade sanctions;
• fluctuations in demand or customers’ levels of capital investment, maintenance expenditures, production, and market cyclicality;
• the risk of material business interruptions, particularly at our manufacturing facilities;
• risks related to government contracting, including changes in levels of government spending and regulatory and contractual requirements applicable to sales to the U.S. government;
• fluctuations in our effective tax rate, including as a result of changing tax laws and other possible tax reform legislation in the U.S. and other jurisdictions;
• changes in environmental laws or regulations, discovery of previously unknown or more extensive contamination, or the failure of a potentially responsible party to perform;
• failure to comply with the U.S. Foreign Corrupt Practices Act or other applicable anti-corruption legislation, export controls and trade sanctions; and
• risk of product liability claims and litigation.
Refer to Item 1A, Risk Factors for more information on factors that could cause actual results or events to differ materially from those anticipated and disclosed within this Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q and in other documents we file from time to time with the SEC.
The forward-looking statements included in this Annual Report on Form 10-K speak only as of the date of this report. We undertake no obligation (and expressly disclaim any obligation) to update any forward-looking statements, whether written or oral or as a result of new information, future events or otherwise.
PART I
ITEM 1.
DESCRIPTION OF BUSINESS
(Amounts reported in this Annual Report on Form 10-K, except per share amounts, are stated in millions unless otherwise specified. References herein to "ITT," the "Company," and such words as "we," "us," and "our" include ITT Inc. and its subsidiaries on a consolidated basis, unless the context otherwise indicates.)
COMPANY OVERVIEW
ITT is a diversified manufacturer of highly engineered critical components and customized technology solutions primarily for the transportation, industrial and energy markets. We manufacture components that are integral to the operation of equipment, systems and manufacturing processes in these key markets. Our products enable functionality for applications where reliability and performance are critically important to our customers and the users of their products. We operate through three primary segments: Motion Technologies (MT), Industrial Process (IP), and Connect & Control Technologies (CCT).
2025 COMPANY SNAPSHOT
• $3.9 billion of sales across approx. 125 countries
• Approx. 11,600 employees in 38 countries
• Global presence with 65% of revenue outside the U.S.
• Balanced and diversified portfolio
MT is a global manufacturer of highly engineered brake pads, shock absorbers and damping technologies for the automotive and rail markets. IP is a global manufacturer of industrial pumps, valves, and monitoring and control systems, and provides aftermarket services for the energy, chemical and petrochemical, pharmaceutical, general industrial, marine, mining, pulp and paper, food and beverage, power generation and biopharmaceutical markets. CCT is a global designer and manufacturer of harsh-environment interconnect solutions and critical energy absorption and flow control components, primarily for the aerospace, defense and industrial markets. For additional segment information, see Segment Information section.
Business Model and Strategy
Our businesses share a common, repeatable operating model centered on our engineering capabilities. Each business applies its technology and engineering expertise to solve our customers' most pressing challenges. Our technological applications foster an ongoing business relationship with our customers which provides us with unique insight into our customers' requirements thus enabling us to develop solutions to better assist our customers achieve their business goals. Our technology and customer intimacy together provide opportunities to capture recurring revenue streams, aftermarket opportunities and content on long-lived platforms from original equipment manufacturers (OEMs).
We create long-term stakeholder value through our four strategic priorities of customer centricity, operational excellence, effective capital deployment, and sustainability and innovation. Our strategy is designed to achieve premier financial performance by combining profitable growth with operational improvements, while keeping our customers at the center of everything we do.
Our operational focus centers on safety, quality, delivery and cost. This is the foundation of the improvements we make in each of our businesses. We are establishing a higher performance culture that goes beyond the factory floor to improve the efficiency and effectiveness of all critical processes in the value chain. These initiatives encompass not only continuous improvement principles, but also leadership, talent and cultural aspects. For additional information, refer to Human Capital Management below.
When value-generating opportunities arise, we seek to expand into new markets and invest in new products that leverage our deep engineering capabilities. We continue to evaluate investments that will enable us to strategically and efficiently deploy capital, including close-to-core acquisitions that have unique and differentiated products, services and technologies. Effective capital deployment, including resource optimization and a disciplined focus on cash flow management, are a major part of how we execute our strategy and continue to deliver strong shareholder returns.
Primary Businesses and Brands
Our brands have a strong international presence across many emerging markets, including China, India, Mexico, Brazil and Saudi Arabia. Below is a list of the key brands in each segment.
OUR KEY BRANDS
• ITT Friction Technologies TM
• KONI ®
• Novitek TM
• Axtone ®
• Goulds Pumps TM
• Bornemann ®
• Svanehøj ®
• PRO Services ®
• Rheinhütte Pumpen ®
• Engineered Valves ®
• Habonim TM
CCT
• Cannon ®
• VEAM ®
• BIW Connector Systems ®
• Aerospace Controls
• Enidine ®
• Compact Automation TM
• kSARIA ®
• Micro-Mode TM
Sustainability
Sustainable practices play an essential role in our business and are firmly rooted in how we conduct our operations and in our daily business decisions. Our products, manufacturing processes and innovations reflect our drive to help make our operations and the communities we serve more sustainable. We believe ingraining these priorities into our strategy will drive long-term growth and shareholder value, help our customers meet their sustainability goals and, furthermore, is simply the right thing to do. Our environmental initiatives fall into three categories:
▪ Development of innovative products that help enable customers to operate more efficiently, reduce total cost of ownership and produce environmentally friendly technologies and processes;
▪ Investment in technologies and processes to reduce CO 2 emissions, waste sent to landfills, water usage and increase our energy supply security through solar installations; and
▪ Decrease harmful emissions through our Reduce–Avoid–Offset framework, in which we seek to reduce our carbon footprint and commit to using renewable energy sources.
We are proud of the strides we have made with respect to our sustainability efforts to date and will continue looking for ways to improve upon these efforts to help bring additional value to our employees, customers, communities and businesses. ITT's sustainability results, strategy and initiatives are discussed further in our 2025 SustainabilITTy Update, which can be found on our website at www.itt.com/sustainability. This report is not incorporated by reference and should not be considered part of this Annual Report on Form 10-K.
Environmental Regulations
We are subject to stringent federal, state, local, and foreign environmental laws and regulations concerning air emissions, water discharges and waste disposal. In the U.S., these include, but are not limited to, the Federal Clean Air Act, the Clean Water Act, the Resource, Conservation and Recovery Act, and the Comprehensive Environmental Response, Compensation and Liability Act. We closely monitor our environmental responsibilities, together with trends in environmental laws. As a result of ITT's ongoing compliance and diligence efforts, ITT's environmental liabilities are, for the most part, not associated with current operating facilities (only two of ITT's 26 locations with current environmental obligations are associated with active operating sites). Additionally, ITT continues to reduce the number of ongoing matters.
Separate from our Reduce–Avoid–Offset framework, we have established an internal program to assess compliance with applicable environmental requirements at our facilities. The program is designed to identify problems in a timely manner, correct potential deficiencies and maintain continued regulatory compliance. We also conduct environmental due diligence during mergers and acquisitions.
Environmental laws and regulations are subject to change, and the nature and timing of such changes, if any, is difficult to predict. To minimize our exposure, we have purchased insurance protection against certain environmental
risks arising from our business activities. As actual costs incurred at identified sites in future periods may vary from our current estimates given the inherent uncertainties in evaluation of environmental exposures, it is not possible to reasonably predict the outcome of these uncertainties or any resulting impact on our financial statements.
For additional information regarding environmental matters, see " Critical Accounting Estimates " within Item 7, Management's Discussion and Analysis , and Note 19, Commitments and Contingencies , to the Consolidated Financial Statements.
Human Capital Management
We believe that sustainable performance and growth are made possible only through the efforts of our dynamic team of employees. In order to continue innovating in the industries and key end markets we serve, ITT remains committed to attracting and retaining top talent globally. We strive to make ITT an engaging and safe workplace for all, and to create a higher performance culture with opportunities and training for all employees to develop and grow professionally and personally. In addition, we offer competitive compensation, benefits, and health and wellness programs.
As of December 31, 2025, we had approximately 11,600 employees located in 38 countries, including approximately 3,300 employees in the U.S. As of December 31, 2025, approximately 5% of our U.S. employees are represented by unions. No one unionized facility in the U.S. accounted for more than 10% of ITT's total revenues. In addition, many of our employees outside the U.S. are covered by collective agreements or represented by works councils or other groups. We continually focus on building strong relationships with our employees, and we have not experienced any material strikes or work stoppages in the past several years.
Health, Safety and Well-being
At ITT, the health, safety, and well-being of our employees is our number one priority. Our Environmental, Safety, Health and Security Council drives the systemic control of workplace risks and continual improvement of environmental and occupational safety and health protocols at all of our sites. We challenge ourselves to continually reduce injury frequency and severity by engaging employees in our “Accept Only Zero” safety accountability system and fostering an environment where employees take responsibility for their actions and have access to tools and training to work safely together. Despite these comprehensive measures, accidents still occur. In such cases, we report the accident, its root cause and any corrective measures taken in ITT’s company-wide accident reporting and tracking tool. Accident reporting and analysis helps ITT gauge the effectiveness of our safety initiatives and procedures across all sites, and it helps us find creative solutions to mitigate risks to our employees at our sites.
Higher Performance Culture & Inclusive Meritocracy
At ITT, fostering a high-performance culture and inclusive meritocracy is core to our values and critical to our success as a company. We are committed to cultivating an environment where varied ideas and perspectives drive engagement, innovation, and better business outcomes. By creating a culture that supports our employees and recognizes merit, we positively impact the performance of our people and the global communities in which we operate. We align our efforts to our strategic workplace goals by building an environment where all ITTers feel empowered to fully engage, achieve their potential, and share ideas freely. We believe our success is fueled by variety of thought, collaboration, and continuous learning from each other’s ideas and experiences. By fostering an inclusive meritocracy, we position ourselves for sustained success in the global marketplace and the creation of long-term value for all stakeholders. Our most recent Employment Information Report (EEO-1 report) is available at www.itt.com/our-people/eeo-1-report, where we will also post our 2025 EEO-1 report when it becomes available. This report is not incorporated by reference and should not be considered part of this Annual Report on Form 10-K.
Talent Development
In order to foster a higher-performance culture, we are committed to maintaining effective strategies to support recruiting and hiring, onboarding and training, compensation planning, performance management and professional development. We invest significant resources to develop our talent to remain a global leader in the manufacturing of highly engineered customized products and solutions. We focus on providing meaningful, equitable career development pathways and support to help ITTers realize their career aspirations. Our development philosophy is built around a “know-do” framework which includes both formal training and experiential learning. Tailored learning programs, coaching and mentoring elevate both technical and other skills (the “know”) while challenging, well-planned work experiences and global assignments prepare ITTers for current and future roles (the “do”). Successful employee development is also supported by thoughtful plans built in partnership between employees and their
managers. Our development planning tools and processes ensure targeted, concrete action planning, and we promote continuous feedback and regular check-ins.
Compensation and Benefit s
We provide flexible compensation and benefits programs to help meet the needs of our employees and their families. In addition to base salaries, we offer numerous benefits for eligible employees, including annual bonuses, stock awards, an employee stock purchase plan for employees in the U.S., a 401(k) Plan, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, flexible work schedules, retirement benefits, employee assistance programs and tuition reimbursement. ITT’s pay and recognition practices leverage data to ensure our employees receive competitive, equitable salaries supported by evaluations of roles, experience, performance and union or works council agreements in select areas. Our variable incentive plans reinforce pay for performance and our strong belief in meritocracy. The majority of our employees are eligible for either a performance-based bonus or a statutory profit-sharing payment. The bonus plans align employee compensation with financial or operational results and individual performance. With respect to stock awards, we have used discretionary equity-based grants with time-based vesting conditions to facilitate the retention of key personnel, particularly executives and those identified as high-performing talent.
SEGMENT INFORMATION
See Note 3, Segment Information , to the Consolidated Financial Statements for financial information about each of our segments.
Motion Technologies (MT)
The Motion Technologies segment is a manufacturer of brake pads, shock absorbers, energy absorption components and damping technologies primarily for the transportation industry, including passenger cars and trucks, light- and heavy-duty commercial and military vehicles, buses and trains. MT consists of the following primary business units: ITT Friction Technologies, KONI, and Axtone.
ITT Friction Technologies (Friction)
Friction manufactures a range of brake pads installed as original equipment (OE) on passenger cars (both internal combustion engine vehicles, hybrids and electric vehicles) and light commercial vehicles for a variety of end customers and automotive platforms around the world. OE brake pads are sold directly to OEMs or to Tier-1 brake manufacturers. Our OE brake pads are designed to meet customer specifications and environmental regulations, and to satisfy an array of performance standards across multiple geographies. Most automotive OEM platforms (car models) require specific brake pad formulations and have demanding quality, delivery and volume schedules. Friction is a recognized industry leader in the paradigm shift towards new brake pad formulations that are designed, developed and tested specifically for electric vehicles (EVs). Success in developing brake pads for EVs has led Friction to win multiple hybrid and EV platform awards with established and new OEMs.
Friction also manufactures aftermarket brake pads designed for the automotive service and repairs market. This market consists of both OE dealers, also referred to as original equipment service (OES) networks, and independent aftermarket networks. Brake pads sold within the OES network generally match the specifications of an original auto platform OE brake pad and are sold either directly to OEMs or to Tier-1 brake manufacturers, such as Aumovio SE, or indirectly through independent distributor channels. Our catalog of pads sold in independent aftermarket networks features technology designed to provide a range of braking performance levels.
KONI
The KONI business services four main end markets: railway rolling stock for freight and passenger trains; car and racing; bus, truck and trailer; and defense.
Railway supplies a wide range of equipment for passenger rail, locomotives, freight cars, high speed trains and light rail. Offerings include customized energy absorption solutions, hydraulic shock absorbers (primary, lateral, and inter-car), yaw dampers, springs, visco-elastic and hydraulic buffers, coupler components and crash mitigation equipment. Revenue from our rail damping systems is balanced between OE and aftermarket customers. Sales are made either directly to train manufacturers and train operators carrying out scheduled train maintenance programs or indirectly through distributors.
Car and Racing features performance shock absorbers often using our Frequency Selective Damping (FSD) technology. FSD products generally are used by car and racing enthusiasts who desire to modify their cars for increased handling performance and comfort. KONI aftermarket car shock absorbers are sold around the world, directly to customers and through a distribution network that markets KONI products into specific geographies or customer groups. KONI shock absorbers are also incorporated into new OEM platform designs and sold to Tier-1 shock absorber manufacturers.
Bus, Truck and Trailer, and Defense manufactures hydraulic and hydro-pneumatic shock absorbers for sale to both OEM and aftermarket customers.
Axtone
The Axtone business specializes in impact energy absorption technology and push-pull components for passenger and freight rolling stock in rail, metro and trams and the production of springs applicable across multiple industries such as rail, industrial and defense applications. Axtone develops, manufactures and distributes components designed to meet the rigorous demands of rail transportation of the most demanding customers worldwide. With a commitment to serving a global customer base, the Axtone solutions adhere to international standards with the highest level of quality, performance and durability.
KONI and Axtone are lifetime partners of rail customers, also offering repair and overhauling capabilities for their products.
Other Information
MT has a global manufacturing footprint with advanced automation capabilities, with production facilities in Europe, China, and North America. MT competes in markets primarily served by large and well-established national and global companies. Key competitive drivers within the brake pad business include technical expertise, formulation development capabilities, scale production, product performance, high-quality standards, cost, customer intimacy, reputation and the ability to meet demanding delivery and volume schedules in a limited amount of time. We have well-established, long-term relationships with our OE and OES brake pad customers based on mutual trust, local proximity and a wide range of cooperative activities, ranging from design, to sampling, prototyping and testing phases of brake pads.
ITT's long-time customer, Continental AG, completed the spin-off of its automotive group sector in September 2025, resulting in the establishment of Aumovio SE ("Aumovio") as an independent, publicly traded company listed on the Frankfurt Stock Exchange. Following the spin-off, Aumovio is ITT's largest customer. Combined sales to Aumovio and Continental AG during 2025 represented 17% of MT's revenue, and approximately 6% of ITT's total revenue. Automaker requests to use ITT brake pads in their Aumovio-produced braking systems (calipers) typically represents approximately 50% of MT's OE revenue from Aumovio. These automaker requests are generally formalized through supply agreements signed directly between MT and the automakers. The remainder of MT's sales to Aumovio is through a long-term agreement to supply Aumovio with aftermarket parts.
MT is a global leader in rail suspension components, freight coupling devices currently used in Europe and crash absorption systems. Competitive drivers in MT's rail business include customer intimacy, price, technical expertise and product performance. MT's rail products are considered critical components because of safety requirements and thus they are designed specifically for different train applications and must satisfy strict compliance requirements.
In July 2024, we sold our Wolverine Advanced Materials (Wolverine) business. Wolverine will continue to act as a third-party supplier of high-performance shims and seals for ITT. The results of the Wolverine business are included in the consolidated statements of operations and cash flows until the date of divestiture.
Industrial Process (IP)
The Industrial Process segment is an OEM and an aftermarket parts and service provider of industrial pumps, valves, plant optimization and remote monitoring systems and services. IP's products serve an extensive base of customers ranging from large multi-national companies and engineering, procurement and construction (EPC) firms to regional distributors and various other end-users. IP's customers operate in global infrastructure and natural resource markets such as energy, chemical and petrochemical, pharmaceutical, general industrial, marine, mining, pulp and paper, food and beverage, power generation and biopharmaceutical. IP's marketplace-recognized brands include Goulds Pumps TM , Bornemann ® , Rheinhütte Pumpen ® , Engineered Valves ® , PRO Services ® , Habonim TM , and Svanehøj ® .
Industrial Pumps
Industrial pumps are used by a wide array of customers and applications primarily in the chemical, energy, marine, mining, general industrial, pharmaceutical and power generation markets. IP designs and manufactures configured-to-order and standards-based industrial pumps that are highly engineered and customized to customer needs . These products include a broad portfolio of centrifugal and twin-screw positive displacement pumps that meet the following industry-recognized standards: American Petroleum Institute (API), American National Standards Institute (ANSI), ATmosphere EXplosible, European Directive 2014/34/EC (ATEX), IEC standards (IECEx) and International Organization for Standardization (ISO). Our project pumps are generally part of larger and more complex capital projects, have longer lead times than baseline pumps and are generally managed by EPC firms.
Valves
Valves are manufactured to handle a wide variety of process conditions and solve unique challenges in the biopharmaceutical, chemical, mining, power generation, pulp and paper, and general industrial markets. Our portfolio of valve products includes knife-gate valves, ball valves, hygienic and industrial diaphragm valves, and valve actuators, marketed under the brand names EnviZion ® , Cam-Line TM , Cam-Tite ® , Dia-Flo ® , Fabri-Valve ® , Pure-Flo ® , Skotch ® , and Habonim TM . Also included within our portfolio is the Integrated Sensing Platform (ISP), which is a next-generation linear position sensing technology for EnviZion ® and Pure-Flo ® hygienic diaphragm valves, developed specifically for the toughest applications in the biopharmaceutical and sanitary industries.
Aftermarket
Our aftermarket solutions, which represented approximately 40% of IP's revenue in 2025, provide customers with replacement parts, services and plant optimization solutions that reduce total cost of ownership of pumps and rotating equipment, and cryogenic applications for the marine sector.
Svanehøj
In January 2024, we acquired Svanehøj Group A/S (Svanehøj) incorporating the Svanehøj ® and Hamworthy Pumps ® brand pumps into IP's portfolio. Svanehøj is a supplier of pumps and related aftermarket services with leading positions in cryogenic applications for the marine sector. Svanehøj Tank Control Systems develops and produces technologies that enhance the safety of liquified natural gas (LNG), cryogenic and refrigerated storage – both onshore and offshore.
Other Information
IP has a global manufacturing footprint with significant operations in the United States, South Korea, Saudi Arabia, Mexico, Germany, Denmark, and Singapore. IP markets its products via a global and diversified sales channel structure. Sales to independent distributors, who service end-users, account for approximately one-third of IP's revenue. We also sell directly to end-users through our customer-focused direct sales and service organization. In addition, we have focused channels dedicated to supporting EPC firms as their needs are often distinct from those of distribution and end-user customers.
The pump and valve markets we serve are highly competitive and fragmented. For most of our products, there are many regional competitors and a limited number of larger global peers. Primary customer purchase decision drivers include price, lead time and on-time performance, brand recognition, quality, breadth of product and service offerings, commercial terms, technical support and localization. Pricing can be very competitive for large projects because completed projects generate ongoing profitable aftermarket opportunities for the OE provider.
Connect & Control Technologies (CCT)
The Connect & Control Technologies segment designs and manufactures a range of highly-engineered connectors, cable assemblies, and specialized products for critical applications supporting various markets including aerospace and defense, industrial, transportation (including EVs), medical and energy. CCT’s products are often components on long-lived platforms that generate recurring aftermarket and replacement opportunities. CCT has organized its business around product offerings and end-user markets, with dedicated teams specializing in solutions for their specific markets, providing focused customer support and expertise.
Connector Products
The connector product portfolio includes high-performance connectors of the following types: Circular, Rectangular, Radio Frequency, Fiber Optic, D-sub Miniature and Micro-Miniature. Brands include Cannon ® , VEAM ® , Micro-Mode TM , and BIW Connector Systems ® , which deliver solutions to enable the transfer of data, signals and power for various end-user markets including aerospace, defense, industrial, transportation, medical and energy.
These brands are known for high-performance, high-reliability solutions which withstand high temperatures and pressure and are resistant to corrosive environments. In certain harsh environment markets, our connector products are considered market leaders because of our technological capabilities, cost performance and global footprint.
Products for the commercial aerospace and defense markets include industry standards-based connectors and late-stage customized solutions. These products are designed to withstand the extreme conditions in harsh environments that are typical in aviation and military applications where reliability and safety are critical factors.
Products for the industrial markets include connectors for industrial production and transportation equipment, industrial electronics and instruments, and other industrial and medical applications. Products for the transportation markets include connectors for electric vehicle charging station applications, passenger rail and heavy-duty vehicles.
Products for the energy markets include connectors that provide power for electric submersible pumps in oil wells and reservoir monitoring instruments. Specific product applications include electrical power penetrators for wellheads, packers and pods that are able to accommodate various sizes and provide for multiple sealing strategies and ratings.
Cable Assembly Products
In September 2024, ITT acquired kSARIA Parent, Inc. (kSARIA), a leading producer and supplier of mission-critical connectivity solutions for the defense and aerospace end markets. kSARIA produces highly engineered cable assemblies for avionics, sensors, communications and networking applications that are highly complementary to ITT’s existing connector portfolio. Brands include kSARIA, Compulink, The Charles E. Gillman Company, TopFlite Components, and Co-Operative Industries Aerospace and Defense (CIA&D).
Control Products
The control product portfolio consists of highly engineered actuation, flow control, energy absorption, environmental control, and composite component solutions for the aerospace, defense and industrial markets.
Control products for the aerospace and defense markets include actuators, valves, pumps and switches for flow control applications, rate controls, seat recline locks and elastomer isolators for aircraft interiors, elastomeric bearings for rotorcraft vibration isolation, heaters, hoses, and composite ducting for environmental control systems. Brands include Aerospace Controls ® and Enidine ® .
Control products for the industrial markets include shock absorbers, wire ropes and actuators for factory and warehouse automation, regulators and switches for process control applications, seismic isolators and large bore shocks for protection of critical infrastructure, and regulators for natural gas vehicles. Brands include Enidine ® , Compact Automation TM , Turn-Act ® , Neo-Dyn ® and Conoflow ® .
Other Information
CCT has a global production footprint, including facilities in the United States, Mexico, Germany, Italy, China and Japan, which provide close geographic proximity to key customers. CCT competes with a large number of companies in highly fragmented industries, ranging from large public multi-national corporations to small privately-held local firms, depending on the product line and region. CCT's ability to compete successfully depends upon numerous factors including quality, price, lead time, performance, brand recognition, customer service, innovation, application expertise and previous installation history. In addition, collaboration with customers to deliver a wide range of product offerings has allowed CCT to compete effectively, to cultivate and maintain strong customer relationships and to expand into new markets. CCT products are sold directly and indirectly through numerous channels, including distributors. CCT has long-lasting relationships with distributors, as many have been selling certain CCT products for decades. Sales to distributors represented approximately 20% of CCT's 2025 revenue.
OTHER COMPANY INFORMATION
Key Components and Raw Materials
All of our businesses require various manufactured components and raw materials, the availability and prices of which may fluctuate.
MANUFACTURED COMPONENTS ASSEMBLED INTO OUR PRODUCTS
• Motors
• Castings
• Mechanical Seals
• Machined Castings
• Metal Fabrications
• Miscellaneous Metal, Plastic, and Electronic Components
PRIMARY RAW MATERIALS
• Steel
• Gold
• Copper
• Nickel
• Iron
• Aluminum
• Tin
• Rubber
• Specialty Alloys, including Titanium
Raw materials are purchased in various forms, such as sheet, bar, rod and wire stock, pellets and metal powders. We also use various specialty resins and adhesives. Raw materials, supplies and product subassemblies are purchased from third-party suppliers, contract manufacturers and commodity dealers. For most of our products, we have alternate sources of supply or such materials are readily available. However, in some instances we depend on a single source of supply, manufacturing or assembly or participate in commodity markets that may be subject to a limited number of suppliers.
Our operating results are generally exposed to fluctuations in the prices and supply constraints of raw materials and commodities due to inflation, supply chain disruptions, foreign currency fluctuations, geopolitical changes, and tariffs imposed by the U.S. and other countries. We continually monitor the business conditions of our supply chain to maintain our market position and to avoid potential supply disruptions. In 2025, while fluctuations occurred due to the factors previously referenced, we are mitigating to avoid customer disruptions with a region-for-region approach, where possible. Because of the rising demand for raw materials globally, we have experienced increases in prices and delays in supply, particularly in the first half of the year, which impacted our financial results. We have been able to mitigate the impact of this inflation via fixed-price supply contracts with suppliers, price increases to customers and productivity savings. We typically acquire materials and components through a combination of blanket and scheduled purchase orders to support our materials requirements for an average of four to eight weeks, except for some specialty materials. In limited circumstances, we may have to obtain scarce components for higher prices on the spot market, which may have a impact on our results. We also acquire certain inventory in anticipation of supply constraints or enter into longer-term pricing commitments with vendors to the priority, price and availability of supply. We evaluate hedging to mitigate or minimize the risk of margin resulting from the of commodity prices. The associated with supply chain , geopolitical , and inflation are expected to continue in 2026, and we are to reasonably predict when they will be resolved. As a result, we cannot provide assurance that we will not be affected by materials price or the availability of supplies to meet customer demand in the future.
Manufacturing Methods
Our businesses utilize two primary methods to fulfill demand for products: build-to-order and engineer-to-order.
• Build-to-order consists of assembling a group of products with the same pre-defined specifications, generally for our OEM customers. We employ build-to-order capabilities to maximize manufacturing and logistics efficiencies by producing high volumes of basic product configurations.
• Engineer-to-order consists of assembling a customized system according to a customer’s individual order specifications. Engineer-to-order permits the configuration of units to meet the customized requirements of our customers.
In both cases, we offer design, integration, test and other production value-added services. Our inventory management and distribution practices in both build-to-order and engineer-to-order seek to improve customer delivery performance and minimize inventory holding periods.
Intellectual Property
Where appropriate, we seek patent protection for inventions and improvements that are likely to be incorporated into our products or where proprietary rights are expected to improve our competitive position. The highly customized application engineering embedded within our products, our proprietary rights, our knowledge capabilities and our brand recognition all contribute to enhancing our competitive position.
Although we own and control a significant number of patents, trade secrets, confidential information, trademarks, trade names, copyrights and other intellectual property rights which, in the aggregate, are of material importance to our business, management believes that our Company, as a whole, as well as each of our core segments, is not materially dependent on any one intellectual property right or related group of such rights. Patents, patent applications and license agreements will expire or terminate over time by operation of law, in accordance with their terms or otherwise. As the portfolio of our patents, patent applications and license agreements has evolved over a long period of time, we do not expect the expiration of any specific patent or other intellectual property right to have a material adverse effect on our financial statements.
Research and Development
Research and Development (R&D) is key to our strategy and is generally focused on the design of highly engineered critical components that operate in harsh environments. Our R&D teams develop competitive products to address our customers' needs in the markets we serve. In addition, we work closely with our customers to engineer solutions to fit their particular applications, thus enabling our customers to achieve their goals. For example, during 2025, we continued to invest in VIDAR ® , a state-of-the-art variable speed motor that eliminates the need for mechanical controls, reduces energy consumption and CO₂ output and ensures that flow controls are more precise. Additionally, our Friction brake pad business, a global leader in braking technologies, continues to develop new brake pad formulations for electric and hybrid vehicles, as well as ground-breaking innovations for low-emission braking technology. This includes the Geo-Pad, a greener brake pad using a proprietary inorganic green binder that delivers superior performance and reduces environmental impact. In Connect & Control Technologies, we advanced several connector and cable‑assembly development programs, including new high‑reliability and fiber‑optic solutions supporting recent aerospace and defense awards. These signal , withstand extreme environmental conditions, and address growing demand for higher‑speed data transmission in mission‑ systems. We believe R&D is a source of competitive and we continue to invest approximately 3% of revenue annually, in new product and other R&D efforts.
Cyclicality and Seasonality
Many of the businesses in which we operate are subject to specific industry and general economic cycles. We consider our connector products in our CCT segment to be an early-cycle business, meaning it generally is impacted in the early portion of an economic cycle. Our automotive and aerospace components businesses tend to be impacted in the middle portion of the cycle, and our industrial pump business typically is impacted late in the economic cycle.
Our businesses experience limited seasonal variations. Revenue impacts from the limited seasonal variations are typically mitigated by our backlog of orders that allows us to adjust levels of production across different periods.
General Developments of the Business
Acquisitions and Divestitures
Date of Transaction
Type
Segment
Business Acquired
Description
September 12, 2024
Acquisition
CCT
kSARIA Parent, Inc.
Leading producer and supplier of mission-critical connectivity solutions for the defense and aerospace end markets.
July 22, 2024
Divestiture
Wolverine Advanced Materials
Manufacturer of automotive braking components and sealing solutions.
January 19, 2024
Acquisition
Svanehøj Group A/S
Supplier of pumps and related aftermarket services with leading positions in cryogenic applications for the marine sector.
December 29, 2023
Divestiture
CCT
Matrix Composites, Inc.("Matrix")
Manufacturer of precision composite components in the aerospace and defense market.
May 2, 2023
Acquisition
CCT
Micro-Mode Products, Inc.
Specialty designer and manufacturer of high-bandwidth radio frequency (RF) connectors for harsh environment defense and space applications.
We continue to grow our core businesses and enhance the ITT portfolio further through mergers and acquisitions, reshaping the portfolio towards attractive pump applications and defense and aerospace interconnect markets, while reducing our automotive exposure.
In December 2025, we entered into a Membership Interest Purchase Agreement (the "Purchase Agreement") with LSF11 Redwood Parent, L.P. (the "Seller"), LSF11 Redwood TopCo LLC (the "Target") and ITT Industries Holdings, Inc., our wholly owned subsidiary, to acquire SPX FLOW, (the "Acquisition"), a subsidiary of the Target and a leading provider of pumps, valves, mixers, aftermarket services, and other flow and process solutions, for an aggregate purchase price of approximately $4,775 payable at closing of the Acquisition, comprised of $4,075 in cash and 3,839,824 shares of our common stock, subject to customary closing conditions, including regulatory approvals. We expect the Acquisition to add critical equipment and adjacent flow and process technologies that extend our capabilities to address complex customer challenges across a wide variety of key growth markets, including food & beverage, personal care, industrial, chemical, energy and mining. As part of the Acquisition, we will add approximately 3,800 employees to our workforce. Upon closing of the Acquisition, we expect SPX FLOW will form part of our Industrial Process segment.
Other than as described herein, there have been no significant developments since our previous Form 10-K filing. See Note 22, Acquisitions, Investments, and Divestitures , to the Consolidated Financial Statements for additional information.
ITEM 1A.
RISK FACTORS
We are subject to a wide range of factors that could materially affect future developments and performance. Because of these factors, past performance may not be a reliable indicator of future results. You should carefully consider, together with the other information contained in this Annual Report on Form 10-K, the risks and uncertainties described below. These risks may have a material adverse effect on our reputation, business, results of operations, financial condition, or cash flows. In addition to these risks, there may be additional risks and uncertainties that adversely affect our business, performance or financial condition in the future that are not presently known, are not currently believed to be significant or are not identified below because they are common to most or all companies.
Business and Operating Risks
Our operating results have been, and may continue to be, adversely affected by unfavorable or uncertain global macroeconomic and capital market conditions.
Adverse global macroeconomic conditions, including due to heightened geopolitical tensions, inflation, slowing growth or a recession, currency fluctuations, new or increased tariffs or barriers to trade, tighter credit, higher interest rates, union strikes, and higher unemployment rates can negatively impact customer confidence, spending, and demand for our products and services. In addition, these conditions can negatively impact our customers and suppliers. A downturn in the economic environment can also lead to increased credit and collectability risk or slower collection on the Company's trade receivables, increased bankruptcy risk amongst our suppliers, the failure of derivative counterparties or other financial institutions, limitations on the ability of the Company to issue new debt, reduced liquidity, declines in the fair value of the Company's financial instruments, and increased risk for the Company's goodwill and intangible assets. We have experienced and, in the future, may continue to experience in revenues, operating results and primarily as a result of these uncertain global macroeconomic conditions.
Our business has been, and may continue to be, adversely affected by raw material price volatility, a limited number of suppliers and the inability of suppliers to meet quality and delivery requirements.
Our business relies on third-party suppliers for raw materials, components and contract manufacturing services to produce our products. Commodity prices and the prices for other raw materials necessary for production have fluctuated, and may continue to fluctuate, which represent a potential risk for our financial results. We are not always able to pass along raw material and component price increases to our customers which has impacted, and may continue to impact, our sales growth and profitability.
In addition, the supply of raw materials to ITT and to its component parts suppliers has been, and may continue to be, interrupted for a variety of reasons affecting our suppliers, including congested shipping ports around the world, production interruptions, heightened geopolitical tensions, including related to the Russia-Ukraine and the Middle East conflicts, global pandemics, the impaired financial condition of a particular supplier, capacity constraints, labor disputes or shortages, the ability to meet regulatory requirements and commitments to other purchasers. For most of our products, we have existing alternate sources of supply, or the required materials have historically been readily available. In limited instances, we depend on a single source of supply, manufacturing or assembly, or participate in commodity markets that may be subject to a limited number of suppliers. Although we believe we could obtain and qualify alternative sources for most sole and limited source supplier materials if necessary, the transition to an alternative source could be complex, costly, and protracted, especially if the change requires us to redesign our systems or re-qualify our products . Any further in our suppliers’ abilities to provide us with sufficient quality or flow of materials or any supplier price increases, or any decreased availability of raw materials or commodities, could further our ability to deliver products to our customers and may impact our .
Recent mergers, acquisitions or venture investments could present operational challenges and past divestitures and spin-offs may expose us to potential liabilities, all of which could adversely affect our results of operations and financial position.
We regularly review our portfolio of businesses and pursue growth through the acquisition of other companies, assets and product lines that either complement or expand our existing businesses. For example, on December 4, 2025, we entered into the Purchase Agreement for the acquisition of SPX FLOW, which remains subject to the satisfaction or waiver of customary closing conditions, including regulatory approvals. Refer to Note 22, Acquisitions, Investments, and Divestitures , for further information regarding acquisitions and investments made during the year and the pending acquisition of SPX FLOW. In addition, from time to time, we make minority investments in other early-stage companies, and we risk losing part or all of our capital in any such investment. Although we conduct what we believe to be a prudent level of investigation regarding the operating and financial condition of the businesses we acquire, a level of risk remains regarding the actual operating condition of these businesses. Until we actually assume operating control of these businesses and their operations, we may not be able to ascertain the actual value or understand the potential liabilities of, or challenges facing, the acquired businesses and their operations. Acquisitions, including the pending acquisition of SPX FLOW, involve a number of risks and present financial, managerial and operational that could have a material effect on our reputation, financial results and business. These include the possibility that:
• an acquired business could under-perform relative to our expectations;
• we could fail to realize the expected synergies of an acquisition;
• we could experience difficulties in the integration of technology, operations, personnel and financial and other systems;
• we could have acquired substantial undisclosed liabilities;
• there could be insufficient internal controls over financial activities or financial reporting at an acquired company that could impact us on a consolidated basis;
• management attention could be diverted from other businesses;
• an acquired business may have been impacted by a previous security breach where system/data integrity was compromised, or data was stolen without the seller's awareness;
• we could lose key employees of the acquired businesses;
• we could experience increased capital requirements; and
• the acquisition could result in customer dissatisfaction.
We have divested a number of businesses, including as part of spin-offs in 1995, 2011, our sale of InTelCo Management LLC (InTelCo), the entity holding asbestos-related assets and liabilities in 2021, and Wolverine in 2024. With respect to some of these former businesses, we have contractually agreed to indemnify the counterparties against, or otherwise retain, certain liabilities including certain product liability claims and environmental matters. Even without ongoing contractual indemnification obligations, we could be exposed to liabilities arising out of such divestitures. Although the counterparties to those divestitures may have agreed to indemnify us or assume certain liabilities relating to those divestitures, there can be no assurance that the indemnity or assumption of liability by the counterparties will be sufficient to protect us against the full amount of these liabilities or that a counterparty will be able to fully satisfy its obligations. Third parties also could seek to hold us responsible for any of the liabilities that a counterparty agreed to assume. Even if we ultimately in recovering any amounts for which we were initially held liable, we may be temporarily required to bear these ourselves.
The industries in which we operate are experiencing a skilled labor shortage and if we are unable to hire and retain key personnel, including engineering talent and senior management talent, our ability to operate or grow our business could be negatively impacted.
The manufacturing industry is currently experiencing a skilled labor shortage. This shortage has created difficulties for the Company in attracting and retaining factory employees, in meeting customer demand and in controlling labor costs. We currently have a significant number of open positions, and we expect this to remain so in 2026. A failure to attract or retain engineering and other highly skilled personnel could adversely affect our operating results, our ability to deliver products and services to our customers and our ability to grow our business. Our future success will continue to depend, to a significant extent, on our ability to attract or retain engineers, senior management, our skilled labor source and other key personnel, which will depend on our ability to offer competitive compensation, training, flexibility and other benefits that our current and prospective employees desire.
Failure to provide high quality and reliable products, innovate or respond to competitors in our markets or protect our intellectual property rights could adversely impact our business and financial results.
We believe product performance, reliability and innovation, application expertise, enforcement of intellectual property rights, brand reputation, and price are principal points of competition in our markets.
We manufacture key components that are integral to the operation of systems and manufacturing processes in the markets we serve. The reliability and performance of our products are critically important to our customers and the users of their products. Accordingly, quality is extremely important to us and our customers due to the potentially costly consequences of product failure. Our quality certifications, including products manufactured to military specifications, are critical to the marketing success of our goods and services. Our success in part depends on our ability to attract and retain skilled engineers and to manufacture to exact tolerances precision-engineered components, subassemblies and finished devices from multiple materials. If our components fail to meet these standards or fail to adapt to evolving standards, it could damage our reputation as a manufacturer of high-quality components, which could hurt our ability to remain competitive and result in a loss of customers, market share or product sales.
Maintaining and improving our competitive position will require our continued investment in manufacturing, research and development, engineering, marketing, customer service and support, and our distribution networks. Insufficient investment in these areas may result in a failure to maintain our competitive position. In addition, our existing competitors, or potential new competitors, may develop products that are cheaper and/or superior to our products, develop more efficient or effective methods of providing products and services, or adapt more quickly than we do to new technologies or evolving customer requirements. These pressures may result in us having to take actions, such as adjusting the prices of certain products, in order to stay competitive.
Obtaining, maintaining and enforcing our proprietary rights is another factor that is critical to the success of our business and our ability to remain competitive. For certain products and manufacturing processes, we rely on patents, trademarks, trade secrets, non-disclosure agreements and other contracts to protect these rights. These contracts may be breached or may not prevent competitors from independently developing or selling similar products. In addition, during the normal course of business, we could unintentionally infringe or violate the proprietary rights of others. Intellectual property litigation could be time consuming for management and could result in significant legal expenses to either pursue claims against others, or to defend ourselves. If we are unable to protect our patents, trademarks, or other proprietary rights, or if we infringe or the rights of others, our ability to remain competitive could be impacted.
If we are unable to maintain our competitive position, our business, results of operations or financial condition could be materially adversely affected.
Our operations could be disrupted, and our business could be materially and adversely affected by our inability to prevent, detect or adequately respond to cybersecurity breaches.
The efficient operation of our business is dependent on information technology (IT) systems, some of which are owned or managed by third parties. In the ordinary course of business, we collect and store confidential information, including proprietary business information belonging to us, our customers, suppliers, business partners and other third parties, as well as personally identifiable information of our employees and others.
Our information technology systems and those of our third-party service providers may be susceptible to damage, disruptions or shutdowns due to power outages, hardware failures, telecommunication failures, cybersecurity incidents and user errors that may affect our operations. Although we actively manage the risks to our information technology systems that are within our control, we can provide no assurance that our actions or those of our third-party service providers will always be successful in eliminating or mitigating risks to our systems, networks or data. Even the most well-protected information technology systems could be vulnerable to internal and external cybersecurity incidents including, but not limited to, those by employees and by computer hackers and other threat actors utilizing techniques such as phishing, ransomware or of service attacks. We have experienced cybersecurity in the past which have not had a material impact on our operations or financial results. If we experience a future in our information technology systems, it could result in the of sales and customers and significant incremental costs, which could materially affect our business. In addition, as a provider of products and services to government and commercial customers, and particularly as a government contractor, we are subject to a heightened risk of cybersecurity caused by computer viruses, -ins or hacking, , or acts of , including by foreign governments, hackers and cyber terrorists. Furthermore, information technology security are increasing in sophistication, intensity and frequency. A cybersecurity may occur, including that we may be to detect in a timely manner.
The integration of artificial intelligence ("AI") into our engineering and manufacturing processes could amplify cybersecurity risks, including unauthorized access to proprietary data and disruption of production systems. AI usage can expand our attack surface and increase the sensitivity and volume of data processed. Threat actors may exploit AI systems (including generative models) to enable more sophisticated phishing, deepfake social engineering, and automated vulnerability discovery. In addition, we depend on third-party AI tools, cloud platforms, and model providers; deficiencies in those vendors’ security, privacy, or model governance could create risks we cannot fully control. The unavailability of our information technology systems, the failure of these systems to perform as anticipated for any reason, or any significant breach of security could cause significant disruption to our business or could result in decreased performance and increased costs.
We continue to monitor data security regulations in the jurisdictions in which we operate. The processing and storage of certain information is increasingly subject to privacy and data security regulations, and many such regulations are country specific. The interpretation and application of data protection laws in the U.S., Europe, China, and elsewhere are uncertain, evolving and may be inconsistent across jurisdictions. Compliance with these various laws may be onerous and require us to incur substantial costs or to change our business practices in a manner that adversely affects our business, while failure to comply with such laws may subject us to substantial penalties.
If we are unable to protect sensitive information, our customers or governmental authorities could question the adequacy of our security processes and procedures and our compliance with evolving privacy and data security regulations and government cybersecurity requirements for government contractors, potentially causing us to lose business. A breach could also result in the loss of our intellectual property, potentially impacting our long-term capability to compete for sales of affected products. In addition, a breach of security of our information technology systems could result in litigation, regulatory action and potential liability, as well as increased costs to implement further information security measures. If we are unable to prevent, detect or adequately respond to cybersecurity incidents, our operations could be disrupted, our reputation could be harmed, and our business and financial condition could be materially and affected.
We may face risks related to the use of Artificial Intelligence and Generative AI technologies
We may leverage machine learning (“ML”) and artificial intelligence (“AI”), including generative AI (“GenAI”), in our business to improve efficiency and innovation within our operations. This may introduce risks related to cybersecurity, data integrity, and inadvertent misuse, as well as ethical and social concerns. While we have implemented governance measures, including a GenAI Governance Committee and restrictions limiting usage to approved enterprise-level tools, these controls may not fully address risks associated with rapidly evolving technologies, provider practices, and competitive adoption. Controls related to AI lifecycle management—covering data stewardship, bias detection, reliability testing, human oversight, incident response, and decommissioning are evolving and may not mitigate all risks. Failure to implement effective AI observability, traceability, and post-deployment monitoring could impair our ability to detect and remedy issues promptly.
AI algorithms may be flawed or biased, and datasets used to train AI systems may be insufficient, unlawfully obtained, or contain personal or protected information without proper rights. These issues could lead to inaccurate or discriminatory outputs, infringement of intellectual property or data privacy rights, and other legal or regulatory violations, as well as adversely affect our business, financial condition, and results of operations. Furthermore, our competitors or other third parties may incorporate AI into their operational processes more quickly or more successfully than us, which could have a material adverse effect on our competitive position, reputation, and operations.
Agentic AI systems are tools capable of autonomously initiating tasks, making decisions, or executing multi-step actions without direct human prompting, which may introduce additional operational, security, and compliance risks. These systems could take actions outside intended business parameters, propagate errors at scale, or interact with internal and external systems in unanticipated ways, increasing the likelihood of operational disruptions or regulatory exposure. Agentic AI may also heighten risks related to model alignment, permissions design, and dependency on third party control mechanisms, any of which may fail to function as expected. If agentic AI systems behave unpredictably, are misconfigured, or are exploited by malicious actors, they could result in unauthorized transactions, data leakage, safety incidents, or other adverse impacts. If we are unable to effectively govern or oversee these autonomous capabilities, we could experience material and affects to our business, reputation, financial condition, and results of operations.
The legal, regulatory, and compliance environments surrounding the design and use of AI technology at the federal, state, and international levels are evolving and complex. For example, the European Union’s Artificial Intelligence Act establishes obligations based on risk classifications, and U.S. federal and state agencies continue
to introduce new frameworks governing AI. Compliance with these evolving regulations could entail significant costs and negatively affect our business. Additionally, AI-related changes may disrupt our industry, lower barriers to entry, and increase competition from larger or better-funded companies with more advanced AI capabilities. If our AI initiatives fail to deliver anticipated benefits or if we cannot adapt to evolving customer expectations, regulatory requirements, or competitive pressures, our business, reputation, financial condition, and results of operations could be materially and adversely affected.
The Company’s ability to manage its business and monitor results is highly dependent upon information and communication systems, and a failure of these systems, including flaws in the implementation of any business system, could adversely impact our business or financial results.
The Company is dependent upon a variety of information technology IT systems, including business systems and communication systems, to operate its business. Over the past several years, we have been implementing new business systems at many of our sites, including within our shared services subsidiary, and we expect these implementations to continue for the next several years. These implementations have required and will continue to require significant investment in capital and deployment of human resources. Potential flaws in implementing business systems or in the failure of any portion or module of the business system(s) may pose risks to our ability to operate successfully and efficiently. In addition, failure to implement the appropriate internal controls with respect to new business systems may result in the business systems producing inaccurate or unreliable information. Any disruptions, delays or deficiencies in the design or implementation of the new business systems or related internal controls, or in the performance of legacy IT systems, could affect the Company’s ability to effectively manage its business, which could affect the Company’s reputation, competitive position and financial results.
A significant portion of our revenue is derived from a single customer. Loss of this customer, a loss of business with this customer, or a reduction in this customer's market share, could adversely impact our financial results.
Sales to Aumovio SE, a supplier to the automotive industry and ITT's largest customer, were approximately 6% of our total revenue in 2025. Requests by automakers to use ITT brake pads in their Aumovio produced braking systems (calipers) typically account for approximately half of MT's revenue from Aumovio. These automaker requests are generally formalized through supply agreements signed directly between MT and the automakers. The remainder of MT's sales to Aumovio in 2025 was generated from a 10-year agreement to supply Aumovio with aftermarket parts, which is effective through December 31, 2033, although there can be no assurance that we are able to retain this customer's business in the future. The loss of this customer, or a reduction in this customer's market share could have a material adverse effect on our business, results of operations or financial condition.
Due to our operations and sales outside of the U.S., we are subject to inherent business risks, including the imposition of tariffs, which may adversely affect our financial results.
Our international operations, including U.S. exports, comprise a growing portion of our operations and are a strategic focus for continued future growth. We have sales in emerging markets such as Mexico, South America, China, and the Middle East. In 2025, approximately 65% of our total sales were to customers operating outside of the United States. Our sales from international operations and export sales are subject to varying degrees of risks inherent in doing business outside of the United States. These risks include the following:
• war or geopolitical instability in regions where we operate;
• fluctuations in foreign exchange rates;
• possibility of unfavorable circumstances arising from host country laws or regulations;
• restrictions, regulations, or tax liabilities on currency repatriation;
• potential negative consequences from changes to taxation policies;
• the disruption of operations from labor and political disturbances; and
• our ability to hire and maintain qualified staff in these regions.
Our operations in emerging markets could involve additional uncertainties such as challenges in our ability to protect our intellectual property, pressure on the pricing of our products, and risks of political instability. Governments of emerging market countries may also impose limitations or prohibitions on our ability to repatriate funds, impose or increase withholding or other taxes on remittances and other payments to us, seek to nationalize our assets, or impose or increase investment barriers or other restrictions that may adversely affect our business.
Because a significant portion of our sales are to customers operating outside the U.S., our financial results have been, and may continue to be, adversely impacted by foreign currency fluctuations, which are influenced by changes in global macroeconomic conditions. The primary foreign currencies to which we have exposure are the Euro, Chinese renminbi, Czech koruna, Danish krone, Singapore dollar, Polish zloty, South Korean won, Saudi riyal, Mexican peso, and Israeli new shekel. Any significant change in the value of currencies of the countries in which we do business relative to the value of the U.S. dollar could reduce our revenue, impact our ability to sell products and control costs, thus our financial results have been, and may continue to be, adversely affected upon translation. In addition, our international subsidiaries report their results of operations and financial position in their respective local currencies (i.e., functional currencies), which are then translated into U.S. dollars for financial reporting purposes. From time to time, we enter into derivative contracts to hedge some of our foreign currency exposures. However, our hedging strategy may fail to reduce our exposure and could even result in an unfavorable impact on our financial results. Refer to Note 21, Derivative Financial Instruments , for further information.
The cost of compliance with increasingly complex and often conflicting regulations worldwide can also impair our flexibility in modifying product, marketing, pricing or other strategies for growing our businesses, as well as our ability to improve productivity and maintain acceptable profit margins.
Tariffs remain uncertain and may continue to have a negative impact to our business.
Over the last several years the U.S. government has undertaken a series of actions to increase tariffs on certain goods imported into the U.S., particularly from China and other key trading partners. In early 2025, the U.S. government announced or extended tariffs on a range of imported goods, including certain industrial components and raw materials, as part of ongoing trade actions. In response, several countries, including China, announced or implemented retaliatory tariffs on goods exported from the United States. These reciprocal trade measures have contributed to increased uncertainty in global trade policy and supply chain dynamics. Prior tariffs have negatively impacted demand for our products as well as the cost of certain parts and materials that we purchase from vendors located overseas, particularly in China. Although we have been mitigating, and will continue attempting to mitigate, the impact of tariffs by supplier and customer negotiations, diversification strategies and pricing actions, there can be no assurance that our mitigation actions will be effective. At this time, it remains unclear what further measures will be implemented, including changes to existing trade agreements or the imposition of additional tariffs. Any new or continued trade disputes or increased tensions between the U.S. and other countries, and any governmental actions, including further increases of existing tariffs or the imposition of new tariffs, or changes to trade agreements applicable to our operations, may continue to impact demand for our products, increase our costs, and our supply chain. These risks, in turn, could have a material effect on our business results of operations and financial condition.
Our business is impacted by our customers' levels of capital investment, maintenance expenditures, production, and market cyclicality.
Demand for certain of our products and services depends on the levels of capital investment, planned maintenance expenditures, and/or production of our customers which, in turn, depend on general economic conditions, availability of credit, economic conditions within their respective industries, supply and demand shocks, workforce strikes or employee absenteeism, volatility in commodity prices, expectations of future market behavior and their liquidity and financial position. The ability of our customers to finance capital investment, maintenance, and/or production may also be affected by factors independent of the conditions in their industries, such as the condition of global credit and capital markets. Accordingly, some of our customers have chosen to postpone capital investment, maintenance, and/or production, and may continue doing so in the future, potentially even during favorable conditions in their industries or markets , which has led, and may continue leading, to a delay or cancellation of orders.
Our customers' businesses, particularly those in the energy, chemical and mining industries, which represented approximately 16%, 9%, and 3%, respectively, of our 2025 revenue, are to varying degrees cyclical and have experienced, and may in the future experience, periodic downturns of varying severity. For example, the volatility of the energy market has generally been dependent upon the prevailing view of future gas and oil prices, which are influenced by numerous supply and demand factors, including availability and cost of capital, global and domestic economic conditions, environmental regulations, policies of the Organization of the Petroleum Exporting Countries (OPEC) countries and Russia and other factors. Our customers in these industries, particularly those whose demand for our products and services is primarily profit-driven, have tended to delay large capital projects, including expensive maintenance and upgrades, during economic downturns. Additionally, fluctuating energy demand forecasts and commodity pricing and other macroeconomic factors may cause our customers to be more conservative in their capital planning, which could reduce demand for our products and services, result in the delay
or cancellation of existing orders, or lead to excess manufacturing capacity, which unfavorably impacts our absorption of fixed manufacturing costs. This reduced demand may also erode average selling prices in our industry. These factors could have a material adverse effect on our business, results of operations and financial condition.
A material business interruption, particularly at one of our manufacturing facilities, could negatively impact our ability to generate sales and meet customer demand.
If operations at one or more of our manufacturing facilities were to be disrupted or damaged as a result of war (including related to Russia-Ukraine, the Middle East, and China-Taiwan), an epidemic or pandemic, changing weather or climate conditions (including increases in storm intensity, sea-level rise, melting of permafrost and temperature extremes on facilities or operations; and changes in the availability or quality of water, or other natural resources on which our business depends), IT system failure, cyber-attack, equipment failure, labor dispute, natural disaster, power outage, flood, fire, explosion, act of terrorism, relocation of production location or any other catastrophic event or reason, our ability to meet customer demand for our products may be impacted. We have business continuity plans in place to mitigate the effects of such interruptions, but these plans may not be sufficient to resolve the issues in a timely manner. A significant interruption in production capability could also require us to make substantial payments due to non-performance. In addition, although we have insurance for certain covered , there can be no assurance that such insurance will be sufficient. In addition, any recovery under our insurance policies would be subject to deductibles and, depending on the coverage, may not offset the revenues or increased expenses that may be experienced during the of operations.
Increased scrutiny from investors, lenders and other market participants regarding our environmental, social and governance or sustainability responsibilities could expose us to additional costs and adversely impact our reputation, business, financial performance and growth.
There is an increasing focus from certain investors, customers and other key stakeholders on corporate responsibility, specifically related to environmental, social, and governance ("ESG") matters, including companies' contribution to climate change and loss of biodiversity. Some investors have used, and may continue to use, ESG criteria to guide their investment strategies and, in some cases, have chosen, and may continue to choose, not to invest in ITT, or to divest their holdings of ITT if they believe our policies relating to corporate responsibility are inadequate. New U.S. and European Union climate-related disclosure requirements may require additional systems, internal controls, and assurance processes that could increase compliance costs.
The ESG factors by which companies’ corporate responsibility practices are assessed have been evolving and may continue to evolve. Additionally, requirements on U.S. public companies and companies with European operations with regards to ESG compliance have been increasing and may continue to increase, including, but not limited to California's Climate Accountability Laws and the European Union's Corporate Sustainability Reporting Directive (CSRD), which will require third-party assurance disclosures. These evolving standards and regulations have caused us, and may continue causing us, to undertake costly initiatives to satisfy such new criteria. If we are unable to satisfy new corporate responsibility criteria, investors may conclude our policies are inadequate and choose not to invest in our securities or to divest all or a portion of their current holdings, which in either case may adversely affect the price of our securities.
In addition, as we identify sustainability topics for voluntary disclosure and work to align with the recommendations of the Financial Stability Board’s Task Force on Climate-Related Financial Disclosures (TCFD) and Sustainability Accounting Standards Board (SASB) standards and our own assessment of priority of sustainability issues, we have expanded and, in the future, may continue to expand our disclosures in these areas. Statements about our sustainability initiatives and goals, and progress against those goals, may be based on standards for measuring progress that are still developing, internal controls and processes that continue to evolve, and assumptions that are subject to change in the future. If our sustainability-related data, processing and reporting are incomplete or inaccurate, if we fail to achieve progress on our metrics on a timely basis or at all, or if we fail to satisfy the expectations of investors and other key stakeholders, our reputation, business, and financial performance could be affected.
Legal and Regulatory Risks
We are subject to risks related to government contracting, including changes in levels of government spending and regulatory and contractual requirements applicable to sales to the U.S. government.
Our CCT and MT segments derive a portion of their revenue from sales to U.S. government customers and higher tier contractors who sell to the U.S. government. The government's expenditures are subject to political and budgetary fluctuations and constraints, which may result in significant unexpected changes in levels of demand for our products. In addition, the award, administration and performance of government contracts are subject to regulatory and contractual requirements that differ significantly from the terms and conditions that apply to contracts with our non-governmental customers. We have in the past and may in the future be subject to audits and investigations to evaluate our compliance with these requirements. If we are found to have failed to comply with requirements applicable to government contractors, we may be subject to various actions, including but not limited to fines or penalties, reductions in the value of our government contracts, restrictions on the sale of certain products to the government, or suspension or debarment from government contracting. Failure to comply with applicable requirements also could our reputation and our ability to compete for future government contracts or sell equivalent commercial products.
If we are not able to meet the requirements for government contractors, we may lose orders, which could have a material adverse effect on our business, financial condition and results of operations.
Changes in our effective tax rates as a result of changes in the realizability of our deferred tax assets, the geographic mix of earnings, tax examinations or disputes, tax authority rulings or changes in the tax laws may adversely affect our financial results.
The Company is subject to taxes in the U.S. and in various foreign jurisdictions. We exercise significant judgment in calculating our provision for income taxes and other tax liabilities. In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain. Changes in domestic or foreign tax laws and regulations, or their interpretation, could result in higher or lower tax rates assessed or changes in the taxability of certain income or the deductibility of certain expenses, thereby affecting our tax expense and profitability. Any significant increase in our future effective tax rates could reduce net income in future periods. Given the global nature of our business, a number of factors may increase our future effective tax rates, including changes in the geographic mix of our profits among jurisdictions with differing statutory income tax rates; sustainability of historical income tax rates in the jurisdictions in which we conduct business; changes in tax laws applicable to us; expiration, renewal or application of tax holidays; the resolution of issues arising from tax audits with various tax authorities; or changes in the valuation of our deferred tax assets, deferred tax liabilities and deferred tax asset valuation allowances.
The amount of income taxes and other taxes we have paid are subject to ongoing audits by U.S. federal, state, and local tax authorities and by non-U.S. authorities. If these audits result in assessments different from amounts paid or reserved, future financial results may include unfavorable tax adjustments. We are currently under routine examination by the U.S. Internal Revenue Service and other U.S. and non-U.S. tax authorities, and we may be subject to additional examinations in the future. The tax authorities may disagree with our tax treatment of certain material items and thereby increase our tax liability. Failure to sustain our position in these matters could result in a material adverse effect on our financial statements.
We are closely monitoring the potential passage of new U.S. and foreign tax legislation, which could result in substantial changes to the current U.S. or foreign tax systems. In October 2021, the Organisation for Economic Cooperation and Development (OECD) and G20 Finance Ministers reached an agreement, known as Base Erosion and Profit Shifting (BEPS) Pillar Two, which is a multi-jurisdictional plan of action to address base erosion and profit shifting. On December 20, 2021, the OECD released the Model GloBE Rules for Pillar Two defining a 15% global minimum tax rate for large multinational corporations. Countries are implementing legislation with widespread adoption of the Model GloBE Rules for Pillar Two. We continue to evaluate the Model GloBE Rules for Pillar Two and related legislation, and their potential impacts. Continuing enactment of these regulations could increase the amount of global corporate income tax paid by the Company. These increases could have a material adverse effect on our effective tax rate. As the effects of a change in U.S. or foreign tax law must be recognized in the period in which the new legislation is enacted, should new legislation be signed into law, our financial results could be materially impacted.
On August 16, 2022, the U.S. government enacted the Inflation Reduction Act of 2022 (the Inflation Reduction Act) into law. The Inflation Reduction Act includes a new corporate alternative minimum tax (the Corporate AMT) of 15% on the adjusted financial statement income (the "AFSI") of corporations with an average AFSI exceeding $1.0
billion over a three-year period. The Corporate AMT was effective for the Company beginning in 2023. Given the AFSI threshold, the Corporate AMT was not applicable to the Company in 2025, but the Corporate AMT may have potential impacts on our future U.S. tax expense, cash taxes and effective tax rate. Additionally, the Inflation Reduction Act imposes a 1% excise tax on the fair market value of net stock repurchases made after December 31, 2022. Although the impact of this provision was not material in prior years, we incurred $5.0 of excise tax on stock repurchases in 2025, and future impacts will depend on the extent of share repurchases in subsequent periods.
Changes in environmental laws or regulations, the discovery of previously unknown or more extensive contamination or the failure of a potentially responsible party to perform may adversely affect our financial results.
We are subject to a variety of federal, state, local and foreign laws, rules and regulations related to the use, storage, handling, discharge or disposal of certain chemicals used in manufacturing our products, as well as laws related to greenhouse gas emissions (including cap-and-trade laws). These laws could require us to incur substantial expenses. Environmental laws and regulations allow for the assessment of substantial fines and criminal sanctions as well as facility shutdowns to address violations and may require the installation of costly pollution control equipment or operational changes to limit emissions or discharges. The discovery of previously unknown or more extensive contamination at a site which the Company previously operated or currently operates could suddenly subject the Company to costly remediation efforts. We could be affected directly or indirectly through impacts on our customers and suppliers by changes in environmental laws or regulations, including, for example, those imposed in response to vapor intrusion or climate change concerns and violations by us of such laws and regulations. We may also be impacted by the adequacy of insurance policies, our to recover costs associated with any such developments, or financial of other potentially responsible parties which could have a material effect on our business, financial condition and results of operations. In addition, new laws and regulations that might reduce demand for oil and gas production or power generation may result in lower spending by some of our IP customers.
Failure to comply with the U.S. Foreign Corrupt Practices Act or other applicable anti-corruption legislation, as well as export controls and trade sanctions, could result in fines or criminal penalties.
We operate in a number of countries throughout the world, including countries known to have a reputation for corruption. We are committed to doing business in accordance with applicable anti-corruption laws. However, we cannot provide assurance that our internal controls will always protect us from reckless or criminal acts committed by our employees, agents or business partners that would violate U.S. and/or applicable non-U.S. laws, including anti-bribery, competition, trade sanctions and regulation, and other laws including but not limited to, the U.S. Foreign Corrupt Practices Act of 1977 and the U.K. Bribery Act of 2010, as well as trade sanctions administered by the Office of Foreign Assets Control, the U.S. Department of State and the U.S. Department of Commerce. Any such violation could result in substantial fines, sanctions, civil and/or criminal penalties, or from government contracts or of operations in certain jurisdictions, and might affect our business, financial condition or results of operations or financial position. Furthermore, detecting, , and resolving actual or is expensive and can consume significant time and attention of our senior management. Even the or appearance of our employees, agents or business partners acting or could our reputation and result in significant expenditures in and responding to such actions.
We are subject to laws, regulations and potential claims relating to product liability.
Our business exposes us to potential product liability risks that are inherent in the design, manufacture, and marketing of products for the markets we serve. In addition, many of the devices we manufacture and sell are critical components designed to be used in harsh environments for long periods of time where the cost of failure is high. Component failures, manufacturing defects, design flaws, or inadequate disclosure of product-related risks or product-related information could result in an unsafe condition or injury to, or death of, an end-user of our products. The occurrence of such a problem could result in product liability claims or a recall of, or safety alert relating to, one or more of our products which could ultimately result, in certain cases, in the removal of such products from the marketplace and regarding costs associated therewith. Product liability or product in the future, regardless of their ultimate outcome, could have an effect on our reputation and on our ability to attract and retain customers for our products.
Anti-takeover provisions in our organizational documents and Indiana law could delay or prevent a change in control.
Certain provisions of our articles of incorporation and by-laws may delay or prevent a merger or acquisition that a shareholder may consider favorable. For example, the articles of incorporation authorize our Board of Directors to issue one or more series of preferred stock. Such provisions may also discourage acquisition proposals or delay or prevent a change in control, which could harm our stock price. Indiana law also imposes some restrictions on mergers and other business combinations between any holder of 10% or more of our outstanding common stock and us as well as certain restrictions on the voting rights of "control shares" of an "issuing public corporation."
Pending SPX FLOW Acquisition Risks
The acquisition of SPX FLOW (the "Acquisition") may not be completed within the expected timeframe, or at all, and the failure to complete the Acquisition could adversely impact our stock price and our future business and financial results.
There can be no assurance that the Acquisition will be completed in the expected timeframe, or at all. The Purchase Agreement contains a number of conditions that must be satisfied or waived prior to the completion of the Acquisition, including regulatory approvals. We can provide no assurance that all closing conditions will be satisfied (or waived, if applicable). Many of the conditions to completion of the Acquisition are not within our control, and we cannot predict when or if these conditions will be satisfied (or waived, as applicable). Whether or not the Acquisition is completed:
• we are responsible for certain transaction costs relating to the Acquisition;
• while the Purchase Agreement is in force, we are subject to certain restrictions on the conduct of our business, including taking any action that would reasonably be expected to have a material negative impact on or materially delay the satisfaction of the conditions in the Purchase Agreement required to consummate the Acquisition, which restrictions may adversely affect our ability to execute certain of our business strategies; and
• matters relating to the Acquisition (including integration planning) may require substantial commitments of time and resources by our management, which could otherwise have been devoted to other opportunities that may have been beneficial to us.
If the Acquisition is not completed, our ongoing business and financial results may be adversely affected and we will be subject to a number of risks, including the following:
• depending on the reasons for the failure to complete the Acquisition, we could be liable to Seller for monetary or other damages in connection with the termination or breach of the Purchase Agreement; and
• we have dedicated significant time and resources, financial and otherwise, in planning for the Acquisition and the associated integration, of which we would lose the benefit if the Acquisition were not completed.
In addition, if the Acquisition is not completed, we may experience negative reactions from the financial markets and from our customers and employees. We also may be subject to litigation related to any failure to complete the Acquisition or to enforcement proceedings commenced against us to perform our obligations under the Purchase Agreement. If the Acquisition is not completed, these risks may materialize and may adversely affect our business, financial results and financial condition, as well as the price of our common stock.
Moreover, we intend to finance the cash portion of the purchase price of the Acquisition with proceeds from the offering of our common stock that closed on December 10, 2025 (the "Equity Offering"), together with proceeds to be drawn from the Term Loan Facility (as defined below) and cash on hand. If the Acquisition is not completed, the proceeds from the equity offering will remain available to us. In such event, we may retain the proceeds for general corporate purposes or deploy them in other ways, which may not generate a return commensurate with investors’ expectations or enhance shareholder value.
We may be unable to integrate SPX FLOW successfully and realize the anticipated benefits of the Acquisition.
If the Acquisition is completed, the successful integration of SPX FLOW and its operations into those of our own and our ability to realize the expected synergies and benefits of the transaction are subject to a number of risks and uncertainties, many of which are outside of our control. We will also be required to devote significant management attention and resources to integrating business practices, cultures and operations of each business. The risks and uncertainties relating to integrating the two businesses include, among other things:
• the risk that SPX FLOW’s business does not perform to our expectations;
• the challenge of integrating complex organizations, systems, operating procedures, compliance programs, technology, networks and other assets of SPX FLOW;
• the difficulties harmonizing differences in the business cultures of our company and SPX FLOW;
• the inability to successfully integrate our respective businesses in a manner that permits us to achieve the expected growth opportunities, cost savings, synergies and other anticipated benefits from the Acquisition;
• the inability to minimize the diversion of management attention from ongoing business concerns during the process of integrating SPX FLOW into our business;
• the inability to resolve potential conflicts that may arise relating to customer, supplier and other important relationships of our business and the business of SPX FLOW;
• difficulties in retaining key management and other key employees; and
• the challenge of managing the expanded operations of a significantly larger and more complex company and coordinating geographically separate organizations.
We will incur substantial expenses to consummate the proposed Acquisition but may not realize the anticipated cost synergies and other benefits. In addition, even if we are able to integrate SPX FLOW successfully, the anticipated benefits of the pending Acquisition may not be realized fully, or at all, or may take longer to realize than expected. Given the size and significance of the Acquisition, we may encounter difficulties in the integration of the operations of SPX FLOW and may fail to realize the full benefits and synergies that we anticipate for the Acquisition, which could adversely impact our business, results of operation and financial condition.
Any anticipated benefits from the Acquisition may vary from expectations.
If the Acquisition is completed, the combined company may fail to realize the anticipated benefits and synergies expected from the Acquisition, which could adversely affect the combined company’s business, financial condition and results of operations. The success of the Acquisition will depend, in significant part, on the combined company’s ability to successfully integrate the acquired business, grow the revenue of the combined company and realize the anticipated strategic benefits and synergies from the combination. We expect double-digit adjusted EPS accretion in the first full year after the Acquisition is consummated, excluding non-cash amortization of intangible assets. Further, we believe that the combination of the companies will provide an annualized run-rate of approximately $80 million of cost synergies by the end of the third year after the Acquisition is consummated (exclusive of an estimated $96 million in associated one-time costs). However, the anticipated benefits of the transaction may not be realized fully or at all, or may take longer to realize than expected. Actual operating, technological, strategic and revenue opportunities, if achieved at all, may be less significant than expected or may take longer to than anticipated. If the combined company is not to these objectives and realize the anticipated benefits and synergies expected from the Acquisition within the anticipated timing or at all, the combined company’s business, financial condition and results of operations may be affected.
SPX FLOW may have liabilities that are not known to us.
SPX FLOW may have liabilities that we failed, or were unable, to discover in the course of performing our due diligence investigations of SPX FLOW. We cannot assure you that the indemnification available to us under the Purchase Agreement in respect of the Acquisition in connection with such agreement will be sufficient in amount, scope or duration to fully offset the possible liabilities associated with the business of SPX FLOW or property that we will assume upon consummation of the Acquisition. We may learn additional information about SPX FLOW that materially adversely affects us, such as unknown or contingent liabilities and liabilities related to compliance with applicable laws. Any such liabilities, individually or in the aggregate, could have a material adverse effect on our business, financial condition and results of operations.
Acquisition accounting adjustments could adversely affect our financial results.
If completed, we will account for the completion of the Acquisition by allocating the purchase price of the Acquisition to the tangible and intangible assets acquired, liabilities assumed and non-controlling interests in SPX FLOW based on their estimated fair value at the Acquisition date. The excess of the purchase price over those estimated fair values will be recorded as goodwill. Changes to acquisition date fair values prior to the expiration of the measurement period, a period not to exceed 12 months from the closing date of the Acquisition, are recorded as an adjustment to the associated goodwill in the reporting period in which the adjustment amounts are determined. Changes to acquisition date fair values after expiration of the measurement period are recorded in earnings.
Differences between preliminary estimates and the final accounting for the Acquisition may occur, and these differences could have a material impact on our future consolidated financial statements and the combined company’s future results of operations and financial position.
While the Acquisition is pending, we and SPX FLOW will be subject to business uncertainties that could adversely affect our respective businesses.
Our success following the Acquisition will depend in part upon the ability of us and SPX FLOW to maintain our respective business relationships. Uncertainty about the effect of the Acquisition on customers, suppliers, employees and other constituencies may have a material adverse effect on us and SPX FLOW. Customers, suppliers and others who deal with us or SPX FLOW may delay or defer business decisions, decide to terminate, modify or renegotiate their relationships or take other actions as a result of the Acquisition that could negatively affect the revenues, earnings and cash flows of our company or SPX FLOW. If we are unable to maintain these business and operational relationships, our financial position, results of operations or cash flows could be materially affected.
Financing the Acquisition will result in an increase in our indebtedness, which could adversely affect us, including by decreasing our business flexibility and increasing our interest expense.
We have secured commitments for a $2,875 million term loan facility (the “Term Loan Facility”) and expect to enter into a related credit agreement prior to the closing of the Acquisition. We intend to finance the cash portion of the purchase price of the Acquisition with proceeds from the Equity Offering, together with proceeds to be drawn from the Term Loan Facility and cash on hand. As of December 31, 2025 our total debt was $782.8 and our total debt as of that date on a pro forma basis after giving effect to the incurrence of indebtedness under the Term Loan Facility in full (without giving effect to $10 million of unamortized debt issuance costs) would have been approximately $3,660. These increases in our indebtedness may, among other things, reduce our flexibility to respond to changing business and economic conditions or to fund capital expenditures or working capital needs, and cause ratings agencies to downgrade our credit ratings or place us on negative watch. In addition, the amount of cash required to pay interest on our indebtedness following, subject to market conditions and other factors, completion of the debt financing and the Acquisition, and thus the demands on our cash resources, will materially increase as a result of the Term Loan Facility and the Acquisition.
ITEM 1B.
UNRESOLVED STAFF COMMENTS
None.
ITEM 1C.
CYBERSECURITY
Cybersecurity Risk Management and Strategy
We have developed and implemented a cybersecurity risk management program intended to protect the confidentiality, integrity, and availability of our critical systems and information. Our cybersecurity risk management program includes a cybersecurity incident response plan.
We design and assess our program based on the National Institute of Standards and Technology Cybersecurity Framework (NIST CSF). This does not imply that we meet any particular technical standards, specifications, or requirements, only that we use the NIST CSF as a guide to help us identify, assess, and manage the cybersecurity risks that are relevant to our business.
Our cybersecurity risk management program is integrated into, and forms an integral part of, our overall enterprise risk management program, and shares common methodologies, reporting channels and governance processes that apply across the enterprise risk management program to other legal, compliance, strategic, operational, and financial risk areas.
We have established a proactive approach to identify and manage material cybersecurity threats which includes, but is not limited to, the following:
• A 24/7/365 managed security operations center that continuously monitors the ITT environment for any anomalous and potentially malicious activity and proactively takes steps to contain the spread of any cybersecurity incident. This managed service includes agentic-AI capabilities to more quickly identify and respond to threats;
• Incident Response and Forensic experts on retainer for rapid deployment in the event of a cybersecurity breach or other critical incident;
• An end-user cybersecurity awareness program that requires annual training completion, monthly simulated phishing emails to assess user susceptibility and provide training on emerging threats, and ongoing awareness communications throughout the year to reinforce learnings and raise awareness of specific, actively exploited threat vectors;
• Security policies and practices aligned with both the NIST Cybersecurity Framework (CSF) and NIST Special Publication 800-171, Revision 2 (NIST 800-171 Rev 2) and the organization’s enterprise risk management requirements;
• Annual cybersecurity reporting and strategic update to ITT's Board of Directors;
• Enterprise-wide centralized Security Information and Event Management (SIEM);
• Regular red-team attack simulations led by industry-leading third-party cybersecurity firms;
• Continuous internal and external facing vulnerability management scanning;
• Threat intelligence feeds from various external sources (fee and non-fee based);
• Threat hunting by both managed service provider and internal team;
• Strategically deployed artificial intelligence-based threat detection technology;
• Cyber risk assessment and classification processes;
• Cyber threat tabletop simulation exercises;
• Cyber Incident Response Plan processes;
• Externally led, targeted threat hunting exercises;
• Engagement of forensic cybersecurity and data analysis firms (as needed) to conduct independent validation assessments if a breach is suspected and/or validated; escalation of an incident and engagement of these firms would be performed in coordination with the CSIRT and Legal teams;
• Engagements with third party consultants to build, design, and improve cyber risk management tools and processes;
• Third-party technology and service provider risk evaluation process that looks at existing controls, validation via standard reporting (including SOC2 Type II report analysis), and heightened monitoring for higher impact partners; and
• Cybersecurity insurance coverage.
During 2025, there were no cybersecurity incidents that had a material effect on the Company. Furthermore, we have not identified risks from known cybersecurity threats, including as a result of any prior cybersecurity incidents, that have materially affected us to date, including our business, business strategy, results of operations, or financial condition. In the event of a material cybersecurity incident, ITT would follow required reporting to the SEC and all other agencies in accordance with the various required reporting protocols. For a discussion of prospective risks related to potential cybersecurity incidents, please refer to Item 1A, Risk Factors .
Cybersecurity Governance
Our Board considers cybersecurity risk as part of its risk oversight function and has delegated to the Audit Committee oversight of cybersecurity and other information technology risks. The Audit Committee oversees management’s implementation of our cybersecurity risk management program and discusses with management the Company's cybersecurity and other information technology risks, controls, and procedures.
The Board receives annual reports from management on our cybersecurity risks and strategic updates. These reports are designed to provide the Board a view into the progress of previous efforts, an update on existing and new material risks, and an overview of proposed or planned cybersecurity-related projects, and foster a discussion of cyber threats trending within the industry and their applicability to the organization. If a new material risk is identified, or if the Company is impacted by a material security incident, the Audit Committee and the full Board of Directors are notified and apprised of developments.
ITT employs a team of certified cybersecurity professionals responsible for assessing and managing cybersecurity risks, led by the Chief Information Security Officer (CISO), who altogether make up ITT’s Cyber Security Operations Center (CSOC). The qualifications of our cybersecurity team include the following industry-recognized certifications: ISC2 Certified Information Systems Security Professional (CISSP), Certified Cloud Security Professional (CCSP), Certified Ethical Hacker (C|EH), Security+, and IAPP Certified Information Privacy Professional (CIPP/US). Additionally, our cybersecurity team possesses several certifications from the SANS
Institute’s Global Information Assurance Certification (GIAC) program, the top cybersecurity accreditation body in the world. These include GIAC Incident Handler Certification (GCIH), GIAC Certified Systems and Network Auditor (GSNA), GIAC Foundational Cybersecurity Technologies (GFACT) and others. The CSOC monitors the global ITT landscape for cyber threats, provides prevention strategies, initiates incident response for detected intrusions, and prescribes proactive and reactive mitigation strategies. The CSOC serves as the cornerstone for protecting, assessing, and managing cybersecurity risks for the enterprise, which includes, but is not limited to, back-office processes, critical manufacturing processes, intellectual property, and sensitive data. The CISO reports to the Chief Information Officer (CIO), who in turn reports to the Chief Financial Officer (CFO). The CIO has over 21 years of experience in information technology, including 14 years at ITT, while the CISO brings over 28 years of experience in information technology, with the last 22 years focused on information security and cybersecurity across various industries. The combined expertise and qualifications of our cybersecurity team enable us to effectively monitor, assess, and respond to cybersecurity .
Management is actively informed about, and monitors, cybersecurity incidents, including their prevention, detection, mitigation, and remediation, through defined processes and reporting mechanisms. This proactive approach includes the alignment of security policies and practices with NIST 800-171 Rev 2 and the organization's enterprise risk management requirements. Twice annually, the CFO and CEO are briefed by the CISO and CIO regarding ongoing projects, investments and changes to the threat landscape that have impacted, or may impact, the organization, ensuring that the highest levels of management are kept abreast of the Company's cybersecurity posture. Overall, this comprehensive approach ensures that management is well-informed and actively involved in safeguarding the Company from cybersecurity threats.
The use of generative AI (GenAI) by adversaries, as well as misuse by well-meaning ITT employees, presents a potential risk to operations and data integrity. ITT has established a GenAI Governance committee to review GenAI use-cases to enable the business while ensuring that security, privacy, bias, legal and ethical concerns are reviewed and addressed before widespread implementation. Enterprise level AI tools are available for use and the use of public versions of common AI tools is prohibited for use with sensitive information. GenAI providers, usages, and control options are an evolving area and ITT is continuously monitoring for changes in frameworks, detect/prevent tooling, and the release of regulations that may impact or guide our usage of such solutions.
ITEM 2.
PROPERTIES
We own or lease approximately 180 manufacturing plants, warehouses, service centers, and sales and administrative offices to support our operations. These properties are located in various regions around the world, including North America, Europe, Asia, South America and the Middle East. We consider these properties to be in good condition with sufficient capacity to accommodate the Company’s needs.
The following table summarizes the number of our material properties (other than our corporate headquarters) by business segment as of December 31, 2025. We consider our properties containing 25,000 square feet or more, which primarily consist of manufacturing locations, to be material. Our material properties account for over 95% of the total square feet of our properties.
Motion Technologies
Industrial Process
Connect & Control Technologies
Total
Number of Owned Locations
Number of Leased Locations
Total Locations
ITEM 3.
LEGAL PROCEEDINGS
From time to time, we are involved in legal proceedings that are incidental to the operation of our businesses. Some of these proceedings allege damages relating to environmental exposure, intellectual property matters, copyright infringement, personal injury claims, product liabilities, employment and employee benefit matters, government contract issues and commercial or contractual disputes and acquisitions or divestitures. Descriptions of certain legal proceedings to which the Company is a party are contained in Note 19, Commitments and Contingencies , to the Consolidated Financial Statements.
INFORMATION ABOUT OUR EXECUTIVE OFFICERS
The executive officers of the Company as of February 3, 2026, are listed below.
Name
Age
Current Title
Luca Savi
President and Chief Executive Officer
Davide Barbon
Senior Vice President and President, Motion Technologies and ITT Asia Pacific
Emmanuel Caprais
Senior Vice President and Chief Financial Officer
Cheryl de Mesa Graziano
Vice President and Chief Accounting Officer
Michael Guhde
Senior Vice President and President, Connect & Control Technologies
Bartek Makowiecki
Senior Vice President, Chief Strategy Officer & President, Industrial Process
Lori B. Marino
Senior Vice President, Chief Legal Officer, Chief Compliance Officer and Secretary
Emrana Sheikh
Senior Vice President and Chief Human Resources Officer
Luca Savi has served as our Chief Executive Officer, President and a director of the Company since January 2019. He previously served as President and Chief Operating Officer of the Company from August 2018 to December 2018 and as Executive Vice President and Chief Operating Officer from January 2017 to August 2018. Prior to that, he served as Executive Vice President, Motion Technologies from February 2016 to January 2017 and as Senior Vice President and President, Motion Technologies from November 2011 to February 2016. Prior to joining ITT, Mr. Savi served as Chief Operating Officer, Comau Body Welding at Comau, a subsidiary of the Fiat Group responsible for producing and serving advanced manufacturing systems, and from 2009 to 2011 as Chief Executive Officer, Comau North America from 2007 to 2009. Mr. Savi previously held leadership roles at Honeywell International, Royal Dutch Shell and technical roles at Ferruzzi-Montedison Group. Mr. Savi is currently a director of MSA Safety Inc. and serves as the chair of its compensation committee.
Davide Barbon has served as our Senior Vice President and President, Motion Technologies and ITT Asia Pacific Region since October 2023. He previously served as our Senior Vice President and President, ITT Asia Pacific Region since October 2020. Prior to that, he served as General Manager of the KONI and Axtone businesses within Motion Technologies from January 2017. Mr. Barbon joined the Company in 2010, initially serving in the Brazil, Russia, India and China business of Motion Technologies, and then led its China business for five years. Prior to joining ITT, he spent 14 years with JLG Industries, where he had a number of roles of increasing responsibility across the United States, Europe, and Latin America.
Emmanuel Caprais has served as our Senior Vice President and Chief Financial Officer since October 2020. He previously served as Vice President of Finance and Group Chief Financial Officer, in charge of the Company’s business unit finance teams, Financial Planning & Analysis and Investor Relations for the company. Mr. Caprais joined ITT in 2012, at which time he served as segment Chief Financial Officer of Motion Technologies and later Industrial Process. Prior to joining ITT, Mr. Caprais held leadership roles in finance at Marelli, and earlier held positions of increasing responsibility in finance at Valeo across North America and Europe.
Cheryl de Mesa Graziano has served as our Vice President and Chief Accounting Officer since November 2022. Prior to joining ITT, she was Chief Accounting Officer of Party City Holdco Inc. where she held positions of increasing responsibility from November 2019 through October 2022. She previously held positions of increasing responsibility at Stanley Black & Decker, Inc. from May 2013 to October 2019, including Assistant Corporate Controller and Global Leader, Corporate Technical Accounting and Compliance. Before 2013, Ms. de Mesa Graziano held finance leadership roles at other companies including IBM and Financial Executives International.
Michael Guhde has served as our Senior Vice President and President, Connect & Control Technologies since February 2024. Prior to joining ITT Mr. Guhde served as Vice President and General Manager at Illinois Tool Works (ITW) from June 2018 to February 2024. Prior to ITW, he spent more than twenty years at Parker Hannifin in general manager, global sales and operations roles.
Bartek Makowiecki has served as our Senior Vice President, Chief Strategy Officer & President, Industrial Process since September 2024. Mr. Makowiecki previously served as our Senior Vice President, Strategy and Business Development since September 2021. Prior to joining ITT, he served as Global Head of Strategy, M&A and Venturing of Ingredion Incorporated from October 2017 to September 2021. Immediately prior, he served as
Director, Corporate Strategy & Head of M&A at Owens Corning from November 2015 to October 2017. Prior to that, Mr. Makowiecki held roles of increasing responsibility in global strategy and M&A at Parker-Hannifin Corporation from August 2003 to October 2015.
Lori B. Marino has served as our Senior Vice President and Chief Legal Officer since January 2023. She was appointed as Secretary and Chief Compliance Officer in October 2023. Ms. Marino previously served as Vice President, Deputy General Counsel and Secretary of ITT from May 2016 to April 2019 and as Vice President, Chief Corporate Counsel and Corporate Secretary from September 2013 to May 2016. Prior to rejoining ITT, Ms. Marino served as Executive Vice President, General Counsel, Secretary and Chief Human Resources Officer at New Senior Investment Group Inc. from April 2019 to September 2021.
Emrana Sheikh joined ITT as our Senior Vice President and Chief Human Resources Officer in February 2025. Prior to joining ITT, Ms. Sheikh served as Chief Talent & Diversity Officer at Kenvue Inc. since July 2024. Prior to that, Ms. Sheikh was Vice President – People Experience, Strategy and Innovation at Kenvue from May 2023 through July 2024. Ms. Sheikh also served in various roles of increasing responsibility in human resources at Johnson & Johnson from August 2018 to May 2023. In addition, Ms. Sheikh held various leadership roles at Asian Paints, Mahindra & Mahindra and Federal Express Corporation.
ITEM 4.
MINE SAFETY DISCLOSURES
Not applicable.
PART II
ITEM 5.
MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
COMMON STOCK AND DIVIDENDS
Our common stock is reported in the consolidated transaction reporting system of the New York Stock Exchange (NYSE), the principal market in which this security is traded (under the trading symbol "ITT"). There were 5,062 holders of record of our common stock on February 6, 2026.
The amount and timing of dividends payable on our common stock are within the sole discretion of our Board of Directors and will be based on, and affected by, a number of factors, including our financial position and results of operations, available cash, expected capital spending plans, prevailing business conditions, and other factors the Board deems relevant. Therefore, we cannot provide any assurance as to what level of dividends, if any, will be paid in the future.
During the fiscal year ended December 31, 2025, we did not offer or sell any equity securities that were not registered under the Securities Act.
ISSUER PURCHASES OF EQUITY SECURITIES
On October 4, 2023, the Board of Directors approved an indefinite term $ 1,000 open-market share repurchase program (the 2023 Plan). There was $ 455 of remaining capacity left under the 2023 Plan as of December 31, 2025. We will utilize the 2023 Plan in a manner that is consistent with our capital allocation strategy, which has centered on those investments necessary to grow our businesses organically and through acquisitions, while also providing cash returns to shareholders. The following table summarizes our purchases of our common stock for the quarter ended December 31, 2025.
(IN MILLIONS, EXCEPT PER SHARE AMOUNTS)
PERIOD
TOTAL
NUMBER
OF SHARES
PURCHASED (1)(3)
AVERAGE
PRICE
PAID
PER SHARE (2)
TOTAL NUMBER OF SHARES PURCHASED AS PART OF PUBLICLY ANNOUNCED PLANS OR PROGRAMS (3)
APPROXIMATE DOLLAR VALUE OF SHARES THAT MAY YET BE PURCHASED UNDER THE PLANS OR PROGRAMS
(1) Excludes shares withheld in settlement of employee tax withholding obligations due upon the vesting of restricted stock unit and performance stock unit awards.
(2) Average price paid per share is calculated on a settlement basis and excludes commissions.
(3) Amounts are in whole numbers.
COMPANY STOCK PERFORMANCE
The following graph shows a comparison of the cumulative total shareholder return for ITT, the S&P 400 Mid Cap Index, and the S&P 400 Capital Goods Index over the five years ended December 31, 2025. It shows the share price appreciation of a $100 investment made on December 31, 2020, assuming any dividends paid are reinvested.
COMPARISON OF CUMULATIVE FIVE-YEAR TOTAL RETURN
ITT Inc.
S&P 400 Mid-Cap
S&P 400 Capital Goods
This graph is not, and is not intended to be, indicative of future performance of our common stock. This graph shall not be deemed "filed" with the SEC or subject to the liabilities of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and should not be deemed to be incorporated by reference into any of our prior or subsequent filings under the Securities Act.
ITEM 6.
[RESERVED]
Not applicable.
ITEM 7.
MANAGEMENT'S DISCUSSION & ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion should be read in conjunction with the consolidated financial statements and the notes related thereto. As we noted earlier in the Forward-Looking and Cautionary Statements of this Annual Report on Form 10-K, this Part II, Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations , and Part II, Item 7A, Quantitative and Qualitative Disclosures about Market Risk (along with other sections of this Annual Report), may contain forward-looking statements. The risks discussed in Part I, Item 1A, Risk Factors , and other risks identified in this Annual Report on Form 10-K could cause our actual results to differ materially from those expressed by such forward-looking statements.
All comparisons included within this Part II, Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations , refer to results for the year ended December 31, 2025 compared to the year ended December 31, 2024, unless stated otherwise. Additionally, all financial results and share repurchases other than per share amounts are reported in millions, unless stated otherwise. Per share amounts are reported in ones. Please refer to our Annual Report on Form 10-K ( 2024 Annual Report ) for a discussion of the year ended December 31, 2024 compared to the year ended December 31, 2023.
OVERVIEW
ITT Inc., through its worldwide subsidiaries, is a diversified manufacturer of highly engineered critical components and customized technology solutions for the transportation, industrial and energy markets. Our product and service offerings are organized into three segments: Motion Technologies (MT), Industrial Process (IP), and Connect & Control Technologies (CCT). Refer to Part I, Item 1, Description of Business , for a further overview of our company, segments, products and service offerings, and other information about the business.
Effective January 1, 2025, the Company changed its method of determining the cost for certain inventories from a last-in, first-out (LIFO) to first-in, first out (FIFO) for all inventories previously accounted for under LIFO. For additional information on the change in accounting principle, refer to Note 1, Description of Business and Basis of Presentation . Management’s discussion and analysis of financial condition and results of operations have been adjusted to reflect the change in accounting principle.
EXECUTIVE SUMMARY
During 2025, we delivered strong financial results, which included revenue and operating income growth, operating margin expansion, EPS growth and effective deployment of capital. The following table provides a summary of key performance indicators for 2025 in comparison to 2024.
Revenue
Operating Income
Operating Margin
EPS
8.5% Increase
0.9% Increase
(130)bp Decrease
(3.3)% Decrease
Organic Revenue
Adjusted Operating Income
Adjusted Operating Margin
Adjusted
EPS
4.8% Increase
11.2% Increase
40bp Increase
14.3% Increase
See the section titled " Key Performance Indicators and Non-GAAP Measures " for a definition and reconciliation of organic revenue, adjusted operating income, adjusted operating margin, and adjusted EPS.
Our 2025 results include:
• Revenue of $3,938.5 increased $307.8, or 8.5%, due to growth in each of our three business segments. IP drove significant growth with pump projects, CCT saw strength across connectors and components within the aerospace and defense markets, and MT continued to outperform with share gains in automotive and strength in rail, resulting in total ITT organic revenue growth of 4.8% for the year. In addition, the 2025 results included incremental revenue of $161.5, primarily from our 2024 acquisition of kSARIA, and benefitted from favorable foreign currency translation of $64.6. The 2024 Wolverine divestiture reduced our total revenue growth by $89.2.
• Operating income of $684.5 increased $6.4, as benefits from higher volume, productivity and pricing, and contributions from acquisitions more than offset the prior year gain on sale of the Wolverine business of $47.8, cost inflation, increased restructuring, acquisition-related expenses, and unfavorable sales mix. Adjusted operating income increased 11.2%.
• Income from continuing operations was $6.11 per diluted share, a decrease of 3.3%, which primarily reflects the prior year gain on sale of Wolverine, a higher effective tax rate, and increased interest expense, partially offset by a lower weighted average share count. Adjusted EPS was $6.72, an increase of 14.3%, reflecting the strength in core operations throughout the year.
Throughout 2025, we remained committed to creating value through effective capital deployment, which included the following:
• Capital expenditures over $120 for the second year in a row, reflecting our continued commitment to fund future growth through capacity expansion, productivity and innovation.
• Executed repurchases of 3.8 shares of common stock on the open market for $521.0.
• $111.0 in dividend payments to our shareholders. Our dividends declared in 2025 of $1.40 per share represented a 10% increase over the dividends per share declared of $1.28 in 2024.
• Enter into a definitive agreement to acquire SPX FLOW for $4,775 to be funded through a combination of cash and equity.
Global Macroeconomic Conditions
Throughout 2025, global macroeconomic conditions evolved against a backdrop of geopolitical uncertainty and shifting market demands. While these dynamics created areas of variability, the Company continued to apply disciplined execution and strategic investment across its businesses. In 2026 we expect demand to remain firm, but with variation between industrial end markets. In addition, changes in tariffs and trade policies, geopolitical and energy market risk, workforce availability and cost, technology transformation and cost inflation are factors that we are watching that may impact our performance going forward.
Tariffs and Trade Policies: Ongoing tariff regimes and changes in global trade frameworks may influence input costs and sourcing patterns. At the same time, these dynamics reinforce the value of our multi‑sourcing, localization, and regional manufacturing strategies. We also continue to monitor developments associated with the United States‑Mexico‑Canada Agreement (USMCA) and ensure that our operations, supply‑chain partners, and cross‑border flows remain compliant with its requirements. Adhering to USMCA rules of origin, documentation standards, and regional content thresholds helps support stable access to North American markets, reduces potential trade-related disruptions, mitigates trade duties, and lowers costs.
Geopolitical and Energy Market Risk : Geopolitical developments may impact supply chains, energy pricing trends, and defense-related procurement. For example, while such factors can shift project timing in certain Industrial Process markets, our growing presence in critical flow technologies and resilient aftermarket channels helps balance exposure. Moreover, select programs in Connect & Control Technologies may benefit from sustained investments in defense and security. Overall, our portfolio evolution aims to strengthen durability across macro cycles.
Workforce Availability and Cost : Tight labor markets and specialized skill requirements remain industry‑wide considerations. We continue to address these trends through talent development and selective automation, which help maintain high levels of quality and delivery performance. These efforts strengthen our long‑term operational capabilities and support sustainable growth.
Technology Transformation : Accelerating advancements in automation, data analytics, and artificial intelligence continue to reshape manufacturing and industrial solutions. We view this shift as an opportunity to further enhance efficiency, reliability, and customer value but it also exposes us to additional cyber related risks and the possibility
that our competitors are able to adapt and utilize this technology at a faster pace and with greater success than we do, We are expanding digital investments across operations and product lines, including technologies that improve energy efficiency and reduce operating costs for customers.
Supply Chain and Cost Inflation : We continue to experience variability in material availability, logistics conditions, and input costs caused by supply chain disruptions, geopolitical developments and tariff pressures. We are using dual‑sourcing strategies, long‑term agreements, strengthened supplier partnerships, and targeted inventory buffers to support consistent delivery performance and help mitigate potential impacts.
Sustainability and Energy Transition : Evolving environmental expectations and customer decarbonization initiatives are influencing product design and purchasing priorities. These trends create meaningful opportunities across our portfolio, particularly in energy efficient solutions, advanced flow technologies, and cryogenic/compressor systems supporting liquid natural gas, ammonia, hydrogen, and CO₂ applications. We are continuing to invest in product innovation and operational sustainability, which enhances our ability to support customers in meeting their current and future requirements.
Agreement to Acquire SPX FLOW
We continue to grow our core businesses and enhance the ITT portfolio further through mergers and acquisitions, reshaping the portfolio towards attractive pump applications and defense and aerospace interconnect markets, while reducing our automotive exposure. On December 4, 2025, we entered into a Membership Interest Purchase Agreement (the "Purchase Agreement") with LSF11 Redwood Parent, L.P., LSF11 Redwood TopCo LLC (the "Target") and ITT Industries Holdings, Inc., our wholly owned subsidiary, to acquire SPX FLOW, Inc. ("SPX FLOW"), a subsidiary of the Target and a leading provider of pumps, valves, mixers, aftermarket services, and other flow and process solutions (the "Acquisition"), for an aggregate purchase price of approximately $4,775 payable at closing of the Acquisition, comprised of $4,075 in cash and 3,839,824 shares of our common stock, subject to customary closing conditions, including regulatory approvals. We expect the acquisition of SPX FLOW to add critical equipment and adjacent flow and process technologies that will extend ITT’s capabilities to address complex customer challenges across a wide variety of key growth markets, including food & beverage, personal care, industrial, chemical, energy, and mining.
DISCUSSION OF FINANCIAL RESULTS
2025 VERSUS 2024
For the Year Ended December 31
Change
Revenue
Gross profit
Operating expenses
Operating income
Interest and other non-operating expense, net
Income tax expense
Income from continuing operations attributable to ITT Inc.
Net income attributable to ITT Inc.
Gross margin
bps
Operating expense to revenue ratio
bps
Operating margin
bps
Effective tax rate
bps
All comparisons included within the Discussion of Financial Results for 2025 versus 2024 refer to results for the year ended December 31, 2025 compared to the year ended December 31, 2024, unless stated otherwise.
REVENUE
The following table summarizes the revenue derived from each of our segments.
For the Year Ended December 31
Change
Organic
growth (a)
Motion Technologies
Industrial Process
Connect & Control Technologies
Eliminations
Total Revenue
(a) See the section titled " Key Performance Indicators and Non-GAAP Measures " for a definition and reconciliation of organic revenue.
Motion Technologies
MT revenue for the year ended December 31, 2025 decreased $19.6 primarily driven by the prior year divestiture of the Wolverine business which generated $89.1 of revenue during 2024. This decline was partially offset by strength in Friction original equipment reflecting our market outperformance and growth across our KONI business. The current year also benefited from favorable foreign currency translation $44.0. Excluding the impact from the divestiture and foreign currency translation, organic revenue increased $25.5, or 1.9%.
Industrial Process
IP revenue for the year ended December 31, 2025 increased $135.2, driven primarily by growth in pump projects, reflecting strength across markets and geographies. The current year also included growth from acquisitions of $26.1 and benefited from favorable foreign currency translation of $15.7. Excluding the impacts from acquisitions and foreign currency translation, organic revenue increased $93.4, or 6.9%.
Connect & Control Technologies
CCT revenue for the year ended December 31, 2025 increased $191.9, including growth from acquisitions of $135.4 and favorable foreign currency translation of $5.0 . Excluding the impacts from acquisitions and foreign currency translation, organic revenue increased $51.5, or 6.2%, reflecting growth in connectors of 5% and components of 7%, primarily within the aerospace and defense markets. Revenue growth was partially offset by slower demand for electric vehicle charging applications.
GROSS PROFIT
Gross profit for 2025 was $1,392.4, reflecting a gross margin of 35.4%. Gross profit for 2024 was $1,249.4, reflecting a gross margin of 34.4%. The increases in gross profit and gross margin were primarily driven by benefits from pricing actions and volume growth, net savings from productivity and sourcing initiatives and favorable foreign currency translation, partially offset by unfavorable sales mix.
OPERATING EXPENSES
The following table provides a disaggregation of our operating expenses by expense type, as well as by segment.
For the Year Ended December 31
Change
General and administrative expenses
Sales and marketing expenses
Research and development expenses
(Gain) loss on sale of businesses
Total operating expenses
By Segment:
Motion Technologies
Industrial Process
Connect & Control Technologies
Corporate & Other
** Percentage not deemed meaningful.
General and administrative (G&A) expenses increased $71.3 for the year ended December 31, 2025, primarily driven by higher incentive-based compensation, restructuring expenses, acquisition-related expenses, and unfavorable foreign currency translation.
Sales and marketing expenses increased $23.0 for the year ended December 31, 2025, primarily driven by higher personnel, commissions, and other selling and marketing-related costs to support higher sales activity, as well as increased intangible amortization expenses.
Research and development (R&D) expenses decreased $5.5 for the year ended December 31, 2025, primarily driven by the divestiture of Wolverine in the prior year and by the completion of certain R&D projects during 2025.
Gain on sale of businesses includes $47.8 related to our July 2024 sale of the Wolverine business which was previously held within our MT segment.
OPERATING INCOME
The following table summarizes our operating income and operating margin by segment.
For the Year Ended December 31
Change
Motion Technologies
Industrial Process
Connect & Control Technologies
Corporate & Other
Total operating income
Operating Margin:
Motion Technologies
bps
Industrial Process
bps
Connect & Control Technologies
bps
Consolidated ITT
bps
MT operating income for the year ended December 31, 2025 decreased $38.7, driven by the $47.8 gain on sale of the Wolverine business recognized in 2024, as well as the loss of income following the divestiture, and unfavorable foreign currency, pricing and sales mix impacts, and higher restructuring costs. The decrease was partially offset by productivity and supply chain savings and benefits from sales volume growth.
IP operating income for the year ended December 31, 2025 increased $36.7, driven by benefits from pricing actions, higher sales volume, net savings from supply chain, restructuring, and productivity initiatives, lower
acquisition-related expenses, and favorable foreign currency impacts. The increase was partially offset by unfavorable sales mix and higher incentive-based compensation costs.
CCT operating income for the year ended December 31, 2025 increased $32.1, driven by benefits from pricing actions, net savings from productivity, sourcing, and restructuring initiatives, higher sales volume, and contributions from kSARIA. The increase was partially offset by higher strategic investment costs, and temporary acquisition related amortization associated with kSARIA.
Corporate & Other costs increased $23.7 for the year ended December 31, 2025, primarily due to higher incentive-based compensation costs, M&A-related professional service costs, and charitable contributions. The increase was partially offset by favorable foreign currency impacts.
INTEREST AND OTHER NON-OPERATING EXPENSE (INCOME), NET
The following table summarizes our interest and other non-operating expense (income), net.
For the Year Ended December 31
Change
Interest expense
Interest income
Non-operating postretirement cost (benefit), net
Other non-operating income, net
Total interest and other non-operating expense, net
Interest expense increased $11.5 due to higher average outstanding debt during 2025, unfavorable interest on uncertain tax positions, and financing costs associated with a bridge loan facility related to the financing of the pending SPX FLOW acquisition. These drivers were partially offset by lower average interest rates on commercial paper borrowings. Interest income increased $4.1 due to a higher cash on deposit following receipt of $1.3 billion in proceeds from our December 2025 common stock public offering. Other non-operating income net increased $1.5 due to a gain on sale of an equity method investment.
INCOME TAX EXPENSE
The following table summarizes our income tax expense and effective tax rate.
For the Year Ended December 31
Change
Income tax expense
Effective tax rate
bps
The higher effective tax rate in 2025 compared to 2024 primarily resulted from the jurisdictional mix of earnings and was driven, in part, by losses generated in entities subject to a valuation allowance. In addition, the company recorded a $4.9 tax expense of U.S. tax on foreign earnings in 2025. The lower rate in 2024 was also due to the company recording a benefit of $6.7 from valuation allowance reversals on U.S. state deferred tax assets and a $5.7 tax benefit of U.S. tax on foreign earnings in 2024.
Recent Income Tax Legislation
In October 2021, more than 135 countries and jurisdictions agreed to participate in a “two-pillar” international tax approach developed by the Organisation for Economic Co-operation and Development (the "OECD"), which includes establishing a global minimum corporate tax rate of 15 percent. The OECD published Tax Challenges Arising from the Digitalisation of the Economy — Global Anti-Base Erosion Model Rules (Pillar Two) in December 2021 and subsequently issued additional commentary and administrative guidance clarifying several aspects of the model rules. Since the model rules have been released, many countries have enacted Pillar Two-related laws, many of which became effective on January 1, 2024 with additional laws effective on January 1, 2025. As of December 31, 2025, Pillar Two did not have a significant impact on our 2025 financial statements.
On January 5, 2026, the OECD released a Pillar Two Administrative Guidance package containing the Side-by-Side Safe Harbor (the "SbS"). Under the SbS, Multinational Enterprises headquartered in a jurisdiction that has a Qualified SbS Regime are eligible for the SbS election. The United States is listed as a jurisdiction with a Qualified SbS Regime. By making the SbS election, top-up taxes under the Income Inclusion Rule (the "IIR") and Undertaxed Profits Rule (the "UTPR") are set to zero. Note, however, that the SbS does not have an impact on the application of Pillar 2 Qualified Domestic Minimum Top-up Taxes (the "QDMTT"). Jurisdictions are required to implement the SbS
effective for fiscal years beginning on or after January 1, 2026 (or at the earliest practicable date where there are constitutional or other superior law constraints preventing retroactive adoption). ITT will monitor the adoption of SbS in each jurisdiction and intends to elect the SbS where available.
On August 16, 2022, the U.S. government enacted the Inflation Reduction Act of 2022 (the Inflation Reduction Act) into law. The Inflation Reduction Act includes a new corporate alternative minimum tax (the Corporate AMT) of 15% on the adjusted financial statement income (the "AFSI") of corporations with an average AFSI exceeding $1.0 billion over a three-year period. The Corporate AMT was effective for the Company beginning in 2023. Given the AFSI threshold, the Corporate AMT was not applicable to the Company in 2025, but the Corporate AMT may have potential impacts on our future U.S. tax expense, cash taxes and effective tax rate. Additionally, the Inflation Reduction Act imposes a 1% excise tax on the fair market value of net stock repurchases made after December 31, 2022. The excise tax on stock repurchases has been appropriately recognized and disclosed in the accompanying consolidated financial statements in this Form 10-K.
On July 4, 2025, President Trump signed the One Big Beautiful Bill Act, which includes a broad range of tax reform provisions affecting businesses, including extending and modifying certain key Tax Cuts & Jobs Act provisions (both domestic and international) and expanding certain Inflation Reduction Act incentives while accelerating the phase-out of others. We have applied the capitalization and amortization requirements under Section 174, as amended by the One Big Beautiful Bill Act (the "OBBBA"), in the current year. The application of these provisions did not have a material impact on the effective tax rate for the year. We will continue to assess their effect on the effective tax rate in future periods.
See Note 6, Income Taxes , to the Consolidated Financial Statements for further information on tax-related matters.
LIQUIDITY AND CAPITAL RESOURCES
Funding and Liquidity Strategy
We monitor our funding needs and execute strategies to meet overall liquidity requirements, including the management of our capital structure, on both a short- and long-term basis. Significant factors that affect our overall management of liquidity include our cash flow from operations, credit ratings, the availability of commercial paper, access to bank lines of credit, term loans, and the ability to attract long-term capital on satisfactory terms. We assess these factors along with current market conditions on a continuous basis, and as a result, may alter the mix of our short- and long-term financing when it is advantageous to do so. We expect to have enough liquidity to fund operations for at least the next 12 months and beyond.
We manage our worldwide cash requirements considering available funds among the many subsidiaries through which we conduct business and the cost effectiveness with which those funds can be accessed. We support our growth and expansion in markets outside of the U.S. through the enhancement of existing products and development of new products, increased capital spending, and potential foreign acquisitions. We look for opportunities to access cash balances in excess of local operating requirements to meet our global liquidity needs in a cost-efficient manner. We transfer cash between certain international subsidiaries and the U.S. when it is cost effective to do so. Net cash distributions from foreign countries to the U.S. during the years ended December 31, 2025 and 2024 were $577.5 and $230.4, respectively. The timing and amount of any additional future distributions remains under evaluation based on our jurisdictional cash needs.
Capital Resources
As of December 31, 2025, we have access to short- and long-term funding sources. These include access to the capital markets through a commercial paper program, as well as $1,100 of available borrowing capacity under our 2025 Revolving Credit Agreement (defined below), which may potentially be expanded to $1,650 under the agreement. In addition, we have market access to secure longer-term funding, if needed. Our commercial paper program is supported by our 2025 Revolving Credit Agreement and our policy is to maintain unused committed bank lines of credit in an amount greater than outstanding commercial paper balances. These sources of capital are described further below and within Note 15, Debt .
Commercial Paper
When available and economically feasible, we have accessed the commercial paper market through programs in place in the U.S. and Europe to supplement cash flows generated internally and to provide additional short-term funding. The following table presents our outstanding commercial paper borrowings.
As of December 31
Commercial Paper Outstanding - U.S. Program
Commercial Paper Outstanding - Euro Program
In the year ended December 31, 2025, we borrowed under the European commercial paper program to partially refinance the Company’s U.S. commercial paper. The proceeds of the 2025 Term Loan Credit Agreement (defined below) were used to refresh the U.S. commercial paper capacity and for other general corporate purposes. All outstanding commercial paper for both periods had maturity terms of less than three months from the date of issuance. Our average daily outstanding commercial paper balance for the years ended 2025 and 2024 was $525.5 and $338.5, respectively, and the maximum outstanding commercial paper during each of those respective years was $1,113.5 and $455.0.
Revolving Credit Agreement
On July 30, 2025, we entered into a revolving credit facility agreement with a syndicate of third-party lenders including U.S. Bank National Association ("US Bank"), as administrative agent (the "2025 Revolving Credit Agreement"). Upon its effectiveness, the 2025 Revolving Credit Agreement replaced the revolving credit facility agreement that we entered into on August 5, 2021, with a syndicate of third-party lenders including Bank of America, N.A., as administrative agent (the 2021 Revolving Credit Agreement). The 2021 Revolving Credit Agreement was terminated on July 30, 2025 with no outstanding balances remaining. The 2025 Revolving Credit Agreement matures in July 2030 and provides for an aggregate principal amount of up to $1,100. The 2025 Revolving Credit Agreement provides for a potential increase of commitment of up to $550 for a possible maximum of $1,650 in aggregate commitments at the request of the Company and with the consent of the institutions providing such increase of commitments.
The 2025 Revolving Credit Agreement contains customary affirmative and negative covenants that, among other things, will limit or restrict our ability to: incur additional debt or issue guarantees; create certain liens; merge or consolidate with another person; sell, transfer, lease or otherwise dispose of all or substantially all of our assets and liquidate or dissolve. Additionally, the 2025 Revolving Credit Agreement requires us not to permit the ratio of consolidated total indebtedness net of unrestricted cash in excess of $100 to consolidated earnings before interest, taxes, depreciation, amortization and other special, extraordinary, unusual, or non-recurring items (adjusted consolidated EBITDA) (leverage ratio) to exceed 3.50 to 1.00, with a qualified acquisition step up immediately following such qualified acquisition of 4.00 to 1.00 for four quarters, 3.75 to 1.00 for two quarters thereafter, and returning to 3.50 to 1.00 thereafter.
Borrowings under the 2025 Revolving Credit Agreement bear interest at an annual rate equal to, at the Company’s option, either (i) term secured overnight financing rate ("Term SOFR") plus a margin ranging from 0.785% to 1.150%, or (ii) an alternate base rate plus a margin ranging from 0% to 0.150%, with the applicable margin determined by reference to the Company’s debt ratings set forth in the 2025 Revolving Credit Agreement. There is a commitment fee under the 2025 Revolving Credit Agreement ranging from 0.090% to 0.225% of commitments under the 2025 Revolving Credit Agreement. As of December 31, 2025, we had no outstanding borrowings under the 2025 Revolving Credit Agreement and all financial covenants (e.g., leverage ratio) were within the prescribed thresholds.
Long-term Debt
Long-term debt is generally defined as any debt with an original maturity greater than 12 months. Our long-term debt is primarily related to the outstanding U.S. term loan maturing in September 2027. The table below provides our long-term debt outstanding as of December 31, 2025 and 2024.
As of December 31
Current portion of long-term debt
Non-current portion of long-term debt
Total long-term debt
2025 Term Loan Credit Agreement
On April 30, 2025, the Company entered into a credit agreement (as amended, the "2025 Term Loan Credit Agreement") among the Company, as borrower, certain of our subsidiaries, as guarantors, each lender from time to time party thereto, and U.S. Bank National Association, as the administrative agent. The 2025 Term Loan Credit Agreement has a maturity of two years and provides for a term loan of $750. Proceeds of the term loan were applied to pay down the Company’s U.S. commercial paper capacity and for other general corporate purposes, including working capital needs. In connection with the entry into the 2025 Revolving Credit Agreement, on July 30, 2025, the Company and lenders entered into an amendment to the 2025 Term Loan Credit Agreement to modify certain covenant baskets and other terms (including amendments to the leverage ratio definition) to conform to the 2025 Revolving Credit Agreement.
Total outstanding borrowings under the Amended 2025 Term Loan Credit Agreement were $520.0 as of December 31, 2025. Borrowings under the 2025 Term Loan Credit Agreement bear interest at an annual rate equal to, at the Company’s option, either (i) Term SOFR plus a margin ranging from 0.875% to 1.375%, or (ii) an alternate base rate plus a margin ranging from 0.0% to 0.375%, with the applicable margin determined by reference to the Company’s debt ratings set forth in the 2025 Term Loan Credit Agreement. The loans under the 2025 Term Loan Credit Agreement may be prepaid by the Company at any time, in whole or in part, without penalty or premium, subject to certain conditions. During 2025, the Company made repayments of $230.0. The 2025 Term Loan Credit Agreement contains customary affirmative and negative covenants.
U.S. Term Loan
On September 12, 2024, the Company entered into a credit agreement (the kSARIA Credit Agreement) among the Company, as borrower, each lender from time to time party thereto, and U.S. Bank National Association, as the administrative agent, sole lead arranger and sole bookrunner. The kSARIA Credit Agreement had a maturity of three years and provided for a term loan of $464, which had been borrowed and was used to finance the Company’s acquisition of kSARIA on September 12, 2024. During 2025, the Company made loan repayments of $229.0 representing the remaining outstanding balance on the kSARIA Credit Agreement, and the kSARIA Credit Agreement was terminated.
Credit Ratings
The Company's ability to access the global capital markets and the related cost of financing is dependent upon, among other factors, the Company's credit ratings. Our credit ratings as of December 31, 2025 were as follows:
Rating Agency
Short-Term
Ratings
Long-Term
Ratings
Standard & Poor’s
BBB
Moody’s Investors Service
Baa1
Fitch Ratings
BBB+
In November 2024, Moody's upgraded ITT's senior unsecured rating, from Baa2 to Baa1. The upgraded ratings reflect ITT's conservative capital structure, product and geographic diversification, installed base, sizable aftermarket revenue, solid EBITDA margins, and good financial flexibility. In December 2025, the rating agencies, Standard and Poor's, Moody’s Investors Service, and Fitch Ratings reaffirmed ITT’s investment‑grade credit ratings with a stable outlook. Please refer to the rating agency websites and press releases for more information.
Sources and Uses of Liquidity
In addition to the capital resources discussed above, our principal source of liquidity is our cash flow generated from operating activities, which provides us with the ability to meet the majority of our short-term funding requirements. The following table summarizes net cash derived from operating, investing, and financing activities for the years ended December 31, 2025 and 2024.
For the Year Ended December 31
Operating activities
Investing activities
Financing activities
Foreign exchange
Total net cash used in continuing operations
Net cash from discontinued operations
Net change in cash and cash equivalents
Operating Activities
The increase in net cash from operating activities of $106.2 was primarily due to higher customer advance payments, favorable timing of accounts receivable collections, and lower compensation payments in the current year.
Investing Activities
The decrease in net cash used in investing activities of $698.1 was primarily driven by the prior M&A activity related to the acquisitions of kSARIA and Svanehøj, partially offset by the divestiture of the Wolverine business, which resulted in a net outflow of $686.9. Refer to Note 22, Acquisitions, Investments, and Divestitures , for further information. Capital expenditures, while exceeding $120 for the second year in a row, decreased $2.6 during 2025 and we received government incentives of $7.9 for our capital investment projects in Italy.
Financing Activities
The increase in net cash from financing activities of $494.0 was primarily driven by proceeds of $1,314.1 from the issuance of common stock to finance the pending acquisition of SPX FLOW. These proceeds were partially offset by a year-over-year change in commercial paper activity of $451.8 and increased repurchases of ITT common stock of $416.5 in the current year.
Dividends
The amount and timing of dividends payable on our common stock are within the sole discretion of our Board of Directors and will be based on, and affected by, a number of factors, including our financial position and results of operations, available cash, expected capital spending plans, prevailing business conditions, and other factors the Board of Directors deems relevant. Therefore, we cannot provide any assurance as to what level of dividends, if any, will be paid in the future. Aggregate dividends declared in 2025 were $111.0, compared to $104.8 in 2024, reflecting annual per share amounts of $1.404 and $1.276, respectively. In the first quarter of 2026, we declared a quarterly dividend of $0.386 per share for shareholders of record on March 6, 2026, which will be paid on April 6, 2026.
Open-market Share Repurchases
On October 4, 2023, the Board of Directors approved an indefinite term $1,000 open-market share repurchase program (the 2023 Plan). There is $455.0 of remaining capacity left under the 2023 Plan as of December 31, 2025. During the years ended December 31, 2025 and 2024, we spent $525.0 and $104.0, respectively, on open-market share repurchases under the 2023 plan. See Note 18, Capital Stock for more information.
Funding of Postretirement Plans
The following table provides a summary of the funded status of our postretirement benefit plans.
As of December 31
Pension
Non-U.S. Pension
Other
Benefits
Total
U.S. Pension
Non-U.S. Pension
Other
Benefits
Total
Fair value of plan assets
Projected benefit obligation
Funded status
Our non-U.S. pension plans, which are typically not funded due to local regulations, had a decrease in projected benefit obligation of $0.3 during 2025, primarily due to an actuarial gain of $6.8 and benefits paid of $3.7, offset by foreign currency translation of $7.8. Our other employee-related benefit plans are generally unfunded plans as well. The projected benefit obligation of these plans increased by $0.6 during 2025 due to interest costs of $2.6 and an actuarial loss of $1.7, offset by benefits paid of $3.9.
Contributions to our U.S. and non-U.S. pension and other postretirement plans were $9.0 and $10.5 during 2025 and 2024, respectively, which were used to fund participant benefits. We currently estimate 2026 contributions to our pension and other postretirement benefits plans of approximately $10.
See Note 16, Postretirement Benefit Plans , for additional financial information related to our postretirement obligations.
Contractual Obligations
The following table summarizes ITT’s commitment to make future payments under long-term contractual obligations as of December 31, 2025.
Payments Due By Period
Total
Beyond 2031
Long-term debt
Operating leases
Purchase obligations (a)
Postretirement benefit payments (b)
Other long-term obligations (c)
Total
In addition to the amounts presented in the table above, we have recorded liabilities for uncertain tax positions of $9.5 in our Consolidated Balance Sheet as of December 31, 2025. This amount has been excluded from the contractual obligations table due to an inability to reasonably estimate the timing of payments in individual years.
(a) Represents unconditional purchase agreements that are enforceable and legally binding and that specify all significant terms to purchase goods or services, including fixed or minimum quantities to be purchased; fixed, minimum or variable price provisions; and the approximate timing of the transaction. Purchase agreements that are cancellable without penalty have been excluded.
(b) Represents the projected timing of payments for benefits earned to date and the expectation that certain future service will be earned by current active employees for our pension and other employee-related benefit plans. See Note 16, Postretirement Benefit Plans , to the Consolidated Financial Statements for additional financial information related to our postretirement obligations.
(c) Other long-term obligations include amounts recorded in our Consolidated Balance Sheet as of December 31, 2025, including estimated environmental payments and employee compensation agreements. We estimate based on historical experience that we will spend, on average, approximately $4 to 8 per year on
environmental investigation and remediation. A portion of our environmental investigation and remediation costs are legally mandated through various orders and agreements with state and federal oversight agencies. As of December 31, 2025, our recorded environmental liability was $ 56.1 . See Note 19, Commitments and Contingencies , to the Consolidated Financial Statements for further information.
Off-Balance Sheet Arrangements
Off-balance sheet arrangements represent transactions, agreements or other contractual arrangements with unconsolidated entities, where an obligation or contingent interest exists. Our off-balance sheet arrangements as of December 31, 2025 consist of indemnities related to acquisition and disposition agreements and certain third-party guarantees.
Indemnities
Since our founding in 1920 (pre-spin-offs), we have acquired and disposed of numerous businesses. The related acquisition and disposition agreements allocate certain assets and liabilities among the parties and contain various representation and warranty clauses and may provide indemnities for a misrepresentation or breach of the representations and warranties by either party or for assumed or excluded liabilities. These provisions address a variety of subjects. The term and monetary amounts of each such provision are defined in the specific agreements and may be affected by various conditions and external factors. Many of the provisions have expired either by operation of law or as a result of the terms of the agreement. We do not have a liability recorded for these expired provisions and are not aware of any claims or other information that would give rise to material payments under such provisions.
Guarantees
We had $ 219.1 of guarantees, letters of credit and similar arrangements outstanding as of December 31, 2025, primarily pertaining to commercial or performance guarantees and insurance matters. We have not recorded any material loss contingencies under these guarantees, letters of credit and similar arrangements as of December 31, 2025 as the likelihood of nonperformance by the underlying obligors is considered remote. From time to time, we may provide certain third-party guarantees that may be affected by various conditions and external factors, some of which could require that payments be made under such guarantees. We do not consider the maximum exposure or current recorded liabilities under our third-party guarantees to be material either individually or in the aggregate. We do not believe such payments would have a material adverse impact on our financial statements.
KEY PERFORMANCE INDICATORS AND NON-GAAP MEASURES
Management reviews a variety of key performance indicators including revenue, segment operating income and margins, and earnings per share, some of which are calculated other than in accordance with accounting principles generally accepted in the United State of America (GAAP). In addition, we consider certain measures to be useful to management and investors when evaluating our operating performance for the periods presented. These measures provide a tool for evaluating our ongoing operations and management of assets from period to period. This information can assist investors in assessing our financial performance and measures our ability to generate capital for deployment among competing strategic alternatives and initiatives, including, but not limited to, acquisitions, dividends, and share repurchases. Some of these metrics, however, are not measures of financial performance under GAAP and should not be considered a substitute for measures determined in accordance with GAAP. We consider the non-GAAP measures disclosed in this Annual Report on Form 10-K to be key performance indicators. These measures, which may not be comparable to similarly titled measures reported by other companies, consist of the following:
• “Organic Revenue” is defined as revenue, excluding the impacts of foreign currency fluctuations, acquisitions, and divestitures that may or may not qualify as discontinued operations. Current year activity from acquisitions is excluded for twelve months following the closing date of acquisition. The period-over-period change resulting from foreign currency fluctuations is estimated using a fixed exchange rate for both the current and prior periods. Prior year revenue is adjusted to exclude activity during the comparable period for twelve months post-closing date for divestitures that do not qualify as discontinued operations. We believe that reporting organic revenue provides useful information to investors by helping identify underlying trends in our business and facilitating comparisons of our revenue performance with prior and future periods and to our peers.
A reconciliation of revenue to organic revenue for the year ended December 31, 2025 is provided below.
Motion
Technologies
Industrial
Process
Connect & Control
Technologies
Eliminations
Total
ITT
2025 Revenue
Less: Acquisitions
Less: Foreign currency translation
2025 Organic revenue
2024 Revenue
Less: Divestitures
2024 Organic revenue
Organic revenue growth
Percentage change
• “Adjusted Operating Income” is defined as operating income adjusted to exclude special items that include, but are not limited to, restructuring, certain asset impairment charges, certain acquisition- and divestiture-related impacts, and unusual or infrequent operating items. Special items represent charges or credits that impact current results, which management views as unrelated to the Company’s ongoing operations and performance.
• “Adjusted Operating Margin” is defined as adjusted operating income divided by revenue. We believe these financial measures are useful to investors and other users of our financial statements in evaluating ongoing operating profitability, as well as in evaluating operating performance in relation to our competitors.
Reconciliations of operating income to adjusted operating income for the years ended December 31, 2025 and 2024 are provided below.
Year Ended December 31, 2025
Motion
Technologies
Industrial
Process
Connect & Control
Technologies
Corporate
ITT Inc.
Operating income
Restructuring costs
Acquisition-related costs
Other special items
Adjusted operating income
Operating margin
Adjusted operating margin
Year Ended December 31, 2024
Motion
Technologies
Industrial
Process
Connect & Control
Technologies
Corporate
ITT Inc.
Operating income
Gain on sale of Wolverine business
Restructuring costs
Acquisition-related costs
Other special items
Adjusted operating income
Operating margin
Adjusted operating margin
• “Adjusted Income from Continuing Operations” is defined as income from continuing operations attributable to ITT Inc. adjusted to exclude special items that include, but are not limited to, restructuring, certain asset impairment charges, certain acquisition- and divestiture-related impacts, income tax settlements or adjustments, and unusual or infrequent items. Special items represent charges or credits, on an after-tax basis, that impact current results, which management views as unrelated to the Company’s ongoing operations and performance. The after-tax basis of each special item is determined using the jurisdictional tax rate of where the expense or benefit occurred and the tax deductibility under local tax rules. “Adjusted Income from Continuing Operations per Diluted Share” (Adjusted EPS) is defined as adjusted income from continuing operations divided by diluted weighted average common shares outstanding. We believe that adjusted income from continuing operations and adjusted EPS are useful to investors and other users of our financial statements in evaluating ongoing operating profitability, as well as in evaluating operating performance in relation to our competitors.
Reconciliations of adjusted income from continuing operations attributable to ITT to income from continuing operations attributable to ITT and adjusted income from continuing operations attributable to ITT per diluted share to income from continuing operations attributable to ITT per diluted share (EPS) for the years ended December 31, 2025 and 2024 are provided below. Per share amounts are reported in ones and may not calculate due to rounding.
Income from Continuing Operations
EPS
Income from Continuing Operations
EPS
Reported
Restructuring costs
Acquisition-related costs (a)
Gain on sale of Wolverine business
Other pre-tax special items (b)
Net tax benefit of pre-tax special items
Other tax-related special items (c)(d)
Adjusted
(a) Acquisition-related costs for 2025 primarily relate to fees incurred to effectuate the agreement to acquire SPX FLOW, including $2.1 of interest-related costs.
(b) Other pre-tax special items for the full year 2025 include interest expense associated with uncertain tax positions.
(c) 2025 includes tax expense on distributions of non-U.S. income of $12.6, tax expense on undistributed foreign earnings of $4.9, tax expense from tax rate change impacts of $1.8, and other tax expense special items of $0.8.
(d) 2024 includes tax expense on distributions of $12.5, tax benefit from valuation allowance impacts of ($6.7), tax benefit on undistributed foreign earnings of ($5.7), tax benefit related to the Micro-Mode acquisition of ($2.2), tax expense from tax rate change impacts of $1.6, and other tax expense items totaling $1.0.
CRITICAL ACCOUNTING ESTIMATES
The preparation of financial statements and related disclosures in accordance with GAAP requires us to make judgments, estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Significant accounting policies used in the preparation of the financial statements are discussed in Note 1, Description of Business, Basis of Presentation and Summary of Significant Accounting Policies , to the Consolidated Financial Statements. An accounting policy is deemed critical if it requires an accounting estimate to be made based on assumptions about matters that are highly uncertain at the time the estimate is made, if different estimates reasonably could have been used, or if changes to the estimate that are reasonably possible could materially affect the financial statements. Senior management has discussed the development, selection and disclosure of these estimates with the Audit Committee of ITT’s Board of Directors.
The accounting estimates and assumptions discussed below are those that we consider most critical to fully understanding our financial statements and evaluating our results as they are inherently uncertain, involve the most subjective or complex judgments, include areas where different estimates reasonably could have been used, and the use of an alternative estimate that is reasonably possible could materially affect the financial statements. We base our estimates on historical experience and other data and assumptions believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Management believes the accounting estimates employed and the resulting balances reported in the Consolidated Financial Statements are reasonable; however, actual results could differ materially from our estimates and assumptions.
Revenue Recognition
Revenue is derived from the sale of products and services to customers. We recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which we expect to be entitled in exchange for those goods or services. For product sales, other than certain long-term construction and production type contracts where we have no alternative use for the product and have an enforceable right to payment, we recognize revenue at the time control of our promised goods or services passes to the customer, generally when products are shipped and the contractual terms have been fulfilled.
We recognize revenue for certain highly customized long-term design and build projects using the cost-to-cost method, based upon the percentage of costs incurred to total projected costs. Revenue and profit recognized under the cost-to-cost method are based on management’s estimates of measures such as total contract revenues, contract costs and the extent of progress toward completion. Due to the long-term nature of the contracts, these estimates are subject to uncertainties and require significant judgment. Estimates of contract costs include labor hours and rates, and material costs. These estimates consider historical performance, the complexity of the work to be performed, the estimated time to complete the project, and other economic factors such as inflation and market rates. We update our estimates on a periodic basis and any revisions to such estimates are recorded in earnings in the period in which they are determined. Provisions for estimated losses, if any, on uncompleted long-term contracts, are made in the period in which such losses are determined.
For contracts recognized at a point in time, provisions for estimated losses, if any, on uncompleted arrangements are recognized in the period in which such losses are determined. These estimates are subject to uncertainties and require significant judgment. They may consider historical performance, the complexity of the work to be performed, the estimated time to complete the project, and other economic factors such as inflation.
Additionally, accruals for estimated expenses related to sales returns and warranties are made at the time products are sold. Reserves for sales returns, rebates and other allowances are established using historical information on the frequency of returns for a particular product and period over which products can be returned. For distributors and resellers, our typical return period is less than 180 days. Future market conditions and product transitions may require us to take actions to increase customer incentive offerings, possibly resulting in a reduction in revenue at the time the incentive is offered.
Warranty accruals are established using historical information on the nature, frequency, and average cost of warranty claims and estimates of future costs. Our standard product warranty terms generally include post-sales support and repairs or replacement of a product at no additional charge for a specified period of time. Although we engage in extensive product quality programs and processes, we base our estimated warranty obligation on product warranty terms offered to customers, ongoing product failure rates, materials usage, service delivery costs incurred in correcting a product failure, and specific product class failures outside of our baseline experience and associated overhead costs. If actual product failure rates, repair rates, or any other post-sales support costs differ from these estimates, revisions to the estimated warranty liability would be required.
For certain highly complex contracts, design, engineering, and other preproduction costs may be capitalized if the costs relate directly to a contract or anticipated contract that the entity can specifically identify, the costs generate or enhance resources of the entity that will be used in satisfying performance obligations in the future and the costs are expected to be recovered. In addition to direct labor and materials to fulfill a contract or anticipated contract, we exercise judgment in determining which costs are allocated, including allocations of contract management and depreciation of tooling used to fulfill the contract. Additionally, overall contract profitability is estimated in determining cost recoverability.
Income Taxes
Deferred income tax assets and liabilities are determined based on the estimated future tax effects of differences between the financial reporting and tax bases of assets and liabilities, applying currently enacted tax rates in effect for the year in which we expect the differences will reverse. We periodically assess the likelihood that we will be able to recover our deferred tax assets, and we reflect any changes to our estimate of the amount we are more likely than not to realize as a valuation allowance, with a corresponding adjustment to earnings or other comprehensive income (loss), as appropriate. The ultimate realization of deferred tax assets depends on the generation of future taxable income (including the reversals of deferred tax liabilities) during the periods in which those deferred tax assets will become deductible.
The Company assesses all available positive and negative evidence regarding the realizability of its deferred tax assets. Significant judgment is required in assessing the need for any valuation allowance recorded against deferred tax assets. In assessing the need for a valuation allowance, we consider all available evidence, both positive and negative, including the future reversal of existing taxable temporary differences, taxable income in carryback periods, prudent and feasible tax planning strategies, estimated future taxable income, and whether we have a recent history of losses. The valuation allowance can be affected by changes to tax regulations, interpretations and rulings, changes to enacted statutory tax rates, and changes to future taxable income estimates.
Our effective tax rate reflects the impact of foreign and U.S. taxes on the undistributed earnings of all foreign subsidiaries because these earnings are considered not indefinitely reinvested outside of the U.S. ITT uses U.S. earnings and profits to estimate the undistributed local statutory foreign earnings. ITT is indefinitely reinvested in the excess of financial reporting over tax basis in its foreign subsidiaries that exceeds undistributed U.S. earnings and profits.
The calculation of our deferred and other tax balances involves significant management judgment when dealing with uncertainties in the application of complex tax regulations and rulings in a multitude of taxing jurisdictions across our global operations. The Company is routinely audited by U.S. federal, state and foreign tax authorities, the results of which could cause proposed assessments against the Company. We recognize potential liabilities and record tax liabilities for anticipated tax audit issues based on our estimate of whether, and to the extent to which, additional taxes will be due. Furthermore, we recognize the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position in consideration of applicable tax statutes and related interpretations and precedents and the expected outcome of the proceedings (or negotiations) with the taxing authorities. Tax benefits recognized in the financial statements from such a position are measured based on the largest benefit that has a greater than 50% likelihood of being realized on ultimate settlement.
We adjust our liability for uncertain tax positions in light of changing facts and circumstances; however, the ultimate resolution of a tax examination may differ from the amounts recorded in the financial statements for a number of reasons, including the Company’s decision to settle rather than litigate a matter, relevant legal precedent related to similar matters, and the Company’s success in supporting its filing positions with the tax authorities. If our estimate of tax liabilities proves different than the ultimate outcome, such differences will affect the provision for income taxes in the period in which such determination is made. Over the next 12 months, the net amount of the tax liability for unrecognized tax benefits in foreign and domestic jurisdictions is not expected to change by a significant amount.
Acquisitions, Goodwill and Other Intangible Assets
Our business acquisitions typically result in the creation of goodwill and other intangible asset balances, and these balances affect the amount and timing of future period amortization expense, as well as expense we could possibly incur as a result of an impairment charge. The cost of acquired companies is allocated to identifiable tangible and intangible assets based on estimated fair value, with the excess allocated to goodwill. Accordingly, we have a significant balance of acquisition date intangible assets, including customer relationships, trademarks, proprietary technology and goodwill. We engage third-party valuation specialists to assist us in determining the acquisition date fair values as necessary.
The allocation of purchase price requires management to make significant estimates and assumptions. Critical estimates include, but are not limited to, future revenue and profit margins, royalty rates, discount rates, customer retention rates, technology migration curves and useful lives assigned to acquired intangible assets. While we believe our assumptions and estimates are reasonable, they are inherently uncertain and based in part on experience, market conditions, projections of future performance and information obtained from management of the acquired companies.
We review goodwill and indefinite-lived intangible assets for impairment annually and whenever events or changes in circumstances indicate the carrying value of an asset may not be recoverable. We also review the carrying value of our finite-lived intangible assets for potential impairment when impairment indicators arise. We conduct our annual impairment tests as of the first day of the fourth quarter. When reviewing for impairment, we may opt to make an initial qualitative evaluation, which considers present events and circumstances, to determine the likelihood of impairment. Our decision to perform a qualitative impairment assessment for an individual reporting unit in a given year is influenced by a number of factors, including the significance of the excess of the reporting unit's estimated fair value over carrying value at the last quantitative assessment date, changes in macroeconomic, industry and reporting-unit specific conditions and the amount of time in between quantitative fair value measurements. If the likelihood of impairment is not considered to be more likely than not, then no further testing is performed.
In cases when we opt not to perform a qualitative evaluation, or the qualitative evaluation indicates that the likelihood of impairment is more likely than not, we then perform a quantitative impairment test for goodwill. We test each reporting unit for goodwill impairment quantitatively at a minimum of once every three years. We compare the estimated fair value of each reporting unit to its carrying value. If the estimated fair value of the reporting unit exceeds the carrying value of the net assets assigned to that reporting unit, goodwill is not impaired. If the carrying value of the net assets assigned to the reporting unit exceeds its fair value, then we record an impairment loss equal to the difference. In our annual impairment test for indefinite-lived intangible assets, we compare the fair value of those assets to their carrying value. We recognize an impairment loss when the estimated fair value of the indefinite-lived intangible asset is less than its carrying value.
We estimate the fair value of our reporting units using an income approach. Under the income approach, we calculate fair value based on the present value of estimated future cash flows. We estimate the fair value of our indefinite-lived intangible assets using the relief from royalty method. The relief from royalty method estimates the portion of a company’s earnings attributable to an intellectual property asset based on an assumed royalty rate that the company would have paid had the asset not been owned.
Determining the fair value of a reporting unit or an indefinite-lived intangible asset is judgmental in nature and involves the use of significant estimates and assumptions, particularly related to future operating results and cash flows. These estimates and assumptions include, but are not limited to, revenue growth rates and operating margins used to calculate projected future cash flows, risk-adjusted discount rates, assumed royalty rates, future economic and market conditions, and the identification of appropriate market comparable data. In addition, the identification of reporting units and the allocation of assets and liabilities to the reporting units when determining the carrying value of each reporting unit also requires judgment. Goodwill is tested for impairment at the reporting unit level, which, based on the applicable accounting guidance, is either the operating segment or one level below (e.g., the divisions of our CCT segment). The fair value of our reporting units and indefinite-lived intangible assets are based on estimates and assumptions that are believed to be reasonable. Significant changes to these estimates and assumptions could adversely impact our conclusions. Actual future results may differ from those estimates. During the fourth quarter of 2025, we performed our annual impairment assessment and determined that the estimated fair values of our goodwill reporting units were substantially in excess of each of their carrying values. Had different reporting units been identified or had different valuation techniques or assumptions been utilized, the results of our tests could have resulted in an , which could have been material.
See Note 12, Goodwill and Other Intangible Assets, Net , to the Consolidated Financial Statements for more information.
Environmental Liabilities
We are subject to various federal, state, local, and foreign environmental laws and regulations that require environmental assessment or remediation efforts. Accruals for environmental exposures are recorded on a site-by-site basis when it is probable that a liability has been incurred and the amount of the liability can be reasonably estimated, based on current law and existing technologies. Significant judgment is required to determine both the likelihood of a loss and the estimated amount of loss. Engineering studies, probability techniques, historical experience, and other factors are used to identify and evaluate remediation alternatives and their related costs in estimating our reserve for environmental liabilities. Our environmental reserve of $56.1 at December 31, 2025, represents management’s estimate of undiscounted costs expected to be incurred related to environmental assessment or remediation efforts, including related legal fees, without regard to potential recoveries from insurance companies or other third parties. Our estimated liability is reduced to reflect the participation of other potentially responsible parties in those instances where it is probable that such parties are legally responsible and financially capable of paying their respective share of the relevant costs and that share can be reasonably estimated. Our environmental accruals are reviewed quarterly and adjusted if needed based on progress of investigation and remediation efforts and as additional technical or legal information become available, such as the impact of negotiations with regulators and other potentially responsible parties, settlements, rulings, advice of legal counsel, and other current information.
We closely monitor our environmental responsibilities, together with trends in the environmental laws. Environmental remediation reserves are subject to numerous inherent uncertainties that affect our ability to estimate our share of the costs. Such uncertainties involve incomplete information regarding particular sites, incomplete information regarding other potentially responsible parties, uncertainty regarding the nature and extent of contamination at each site, uncertainties concerning the extent of remediation required under existing regulations, uncertainties concerning our share of any remediation liability, if any, widely varying cost estimates associated with potential alternative remedial approaches, uncertainty with regard to the length of time required to remediate a particular site, uncertainties concerning the potential effects of continuing improvements in remediation technology, and unpredictable nature and timing of changes in environmental standards and regulatory requirements. The effect of legislative or regulatory changes on environmental standards could be material to the Company’s financial statements. Additionally, violations by us of such laws and regulations, discovery of previously unknown or more extensive contamination, litigation involving environmental impacts, our inability to recover costs associated with any such developments, or financial of other potentially responsible parties could have a material effect on our financial statements.
Although it is not possible to predict with certainty the ultimate costs of environmental remediation, the reasonably possible high-end of our estimated environmental liability range at December 31, 2025 was $97.3. See Note 19, Commitments and Contingencies , to the Consolidated Financial Statements for more information.
Recent Accounting Pronouncements
See Note 2, Recent Accounting Pronouncements , to the Consolidated Financial Statements for a complete discussion of recent accounting pronouncements.
