Management’s Discussion and Analysis of Financial Condition and Results of Operations
Quantitative and Qualitative Disclosures About Market Risk
Financial Statements and Supplementary Data
Changes in and Disagreements With Accountants on Accounting and Financial Disclosure
Controls and Procedures
Other Information
Disclosure Regarding Foreign Jurisdictions that Prevent Inspections
PART III
Directors, Executive Officers and Corporate Governance
Executive Compensation
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Certain Relationships and Related Transactions and Director Independence
Principal Accountant Fees and Services
PART IV
Exhibits and Financial Statement Schedules
Form 10-K Summary
This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. We intend such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in Section 27A of the Securities Act of 1933, as amended (the "Securities Act"), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Any statements in this Annual Report that relate to future events or conditions, including without limitation, the statements in Part I, “Item 1A. Risk Factors” and in Part II under “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and located elsewhere herein regarding industry prospects, our addressable markets, our competitive position, macroeconomic conditions and their anticipated effect on our business , the benefits and integration of our acquisitions, our ability to remediate the material weakness in our internal controls over financial reporting on business acquisitions, government funding and defense spending, financial results and financial condition, expectations for when our products become operational, capabilities and potential uses of our products, steps taken to enhance liquidity, or our prospective results of operations or financial position, may be deemed to be forward-looking statements. Without limiting the foregoing, the words “believes,” “anticipates,” “plans,” “expects,” and similar expressions are intended to identify forward-looking statements. Such forward-looking statements represent management’s current expectations and are inherently uncertain. There are a number of important factors that could materially impact the value of our common stock or cause actual results to differ materially from those indicated by such forward-looking statements. Such factors include the important factors discussed under the caption “Risk Factors” in Part I. Item 1A of this Form 10-K for the fiscal year ended March 31, 2026, which among others, could cause actual results to differ materially from those indicated by forward-looking statements made herein and presented elsewhere by management from time to time. Any such forward-looking statements represent management’s estimates as of the date of this Annual Report on Form 10-K. While we may elect to update such forward-looking statements at some point in the future, we disclaim any obligation to do so, except as required by applicable law, even if subsequent events cause our views to change. These forward-looking statements should not be relied upon as representing our views as of any date subsequent to the date of this Annual Report on Form 10-K.
American Superconductor®, AMSC®, Comtrafo™, Neeltran®, NEPSI™, NWL®, to the next power™, think inside the box™, Smarter, Cleaner...Better Energy™, orchestrate the rhythm and harmony of power on the grid™, Amperium®, D-VAR®, PowerModule™, D-VAR VVO®, PQ-IVR®, SeaTitan®, Gridtec™, Mairnetec™, Windtec™, actiVAR®, armorVAR™, SafetyLOCK™ are trademarks or registered trademarks of American Superconductor Corporation or our subsidiaries. We reserve all of our rights with respect to our trademarks or registered trademarks regardless of whether they are so designated in this Annual Report on Form 10-K by an ® or ™ symbol. All other brand names, product names, trademarks or service marks appearing in this Annual Report on Form 10-K are the property of their respective holders.
PART I
Item 1.
BUSINESS
Overview
American Superconductor Corporation (together with its subsidiaries, “AMSC®” or the “Company”) was founded on April 9, 1987. At AMSC, we believe that our creativity can meet today’s challenges and help us progress to a better future. That means using future-facing technologies to harmonize the world’s desire for sustainable progress with the need for more reliable, effective and efficient power delivery. Already, our transformative power solutions are moving the world forward.
We design, develop, and deploy power control solutions that harmonize an increasingly complex energy system, helping our customers scale without added complexity or size. Our system level products leverage the Company's proprietary "smart materials" and "smart software and controls" to provide enhanced resiliency and improved performance of megawatt-scale power flow.
Right now, we are powering the evolution of a grid that is fit for the future: a more reliable and resilient grid built to support and incorporate a broad mix of energy sources. Our pioneering products, software and control solutions are creating more cost-effective and efficient ways to deliver power across a mix of energy sources to ensure a reliable grid that meets the rising demand of power and supports critical infrastructure. This exciting energy future also depends on computer chips, batteries and fuel cells that are built from silicon, lithium and carbon. All of these building blocks must be mined, processed and assembled. Industrial manufacturers of these essential materials as well as semiconductor manufacturers must be able to power their factories in ways that scale without adding complexity or size. Our voltage compensators, capacitors, transformers and rectifiers can power the energy-intensive factories of the future while reducing the risk of costly power interruptions that could hinder this journey to a better future.
In an era of increasing global tensions, we provide advanced power and protection solutions. Our systems help naval vessels reduce magnetic signatures to enhance survivability against magnetically activated threats, while also powering critical onboard systems and supporting shipyard infrastructure. We engineer rugged, compact solutions that protect, power, and perform, so naval fleets stay ready, wherever duty calls.
In the wind power market, we enable manufacturers to field highly competitive wind turbines through our advanced power electronics and control system products, engineering, and support services. Our power grid and wind products and services provide exceptional reliability, security, efficiency, and affordability to our customers.
Our power system solutions help to improve energy efficiency, alleviate power capacity and other constraints, improve system resiliency, and increase the adoption of renewable energy generation. Demand for our solutions is driven by: the growing needs for modernized grids that improve power reliability, security, and quality, the U.S. Navy’s effort to upgrade in-board power systems to support fleet electrification, and the need for increased renewable sources of electricity, such as wind and solar energy. Concerns about these factors have led to increased spending by corporations and the military, as well as supportive government regulations and initiatives on local, state and national levels, including renewable portfolio standards, tax incentives, and international treaties. We estimate that the total annual addressable global market for our products and solutions is over $15 billion as of the fiscal year ended March 31, 2026.
Our Company's addressable market is driven by a record global energy transition investment of $2.3 trillion in 2025, up 8% year over year, led by electrified transportation ($893 billion), renewable energy ($690 billion), and grid infrastructure ($483 billion). Approximately $110 billion was recorded in mining and materials investments and $185 billion in semiconductor capacity. These two investments were mostly driven by electrification and energy security, which are accelerating the shift toward stronger domestic supply chains. In addition, we see more than $47 billion of U.S. federal investment in military ship systems and capabilities to help ensure performance and security amid increasing geopolitical uncertainty.
On December 5, 2025, we entered into a Stock Exchange Agreement with the selling stockholders named therein. Pursuant to the terms of the Stock Exchange Agreement and concurrently with entering into such agreement, Mardin Participações Ltda., an entity incorporated in Brazil (“AMSC Brazil”) and our wholly-owned subsidiary, directly or indirectly, purchased all of the issued and outstanding shares of Comtrafo Indústria de Transformadores Elétricos S.A. ("Comtrafo"). Comtrafo is a Brazil-based manufacturer of large power and distribution transformers primarily for utility customers and also for industrial customers. Comtrafo is operated and reported as a component of our Grid business segment. We refer to this transaction as the "acquisition of Comtrafo."
On August 1, 2024, we entered into a Stock Purchase Agreement with the selling stockholders named therein. Pursuant to the terms of the Stock Purchase Agreement and concurrently with entering into such agreement, we acquired all of the issued and outstanding shares of Megatran Industries, Inc. Megatran is now a wholly-owned subsidiary of the Company. Megatran's wholly-owned subsidiary, NWL, Inc., ("NWL") is a U.S.-based global producer of engineered power conversion solutions for demanding industrial and military applications. Megatran, together with NWL and its other wholly-owned subsidiaries and affiliates, is operated and reported as a component of our Grid business segment. We refer to this transaction as the "acquisition of NWL."
Market opportunities
We provide solutions that address three key drivers of our business:
the global demand for traditional and renewable energy;
the global demand for critical materials, including semiconductors, electrification, industrial modernization, and power capacity expansion; and
the electrification of Naval and military capabilities.
This all requires an electric grid that is fit for the future.
The Global Demand for Traditional and Renewable Energy:
In traditional energy markets, we provide advanced power control and system solutions across upstream, midstream, and downstream operations. These operations include drilling, production, processing, and storage. As increased investments and production place greater demands on electrical infrastructure, our solutions help stabilize power quality and supply by mitigating harmonics and improving overall system performance. Through these solutions, we enable more efficient, reliable, and productive operations while supporting environmental requirements.
We also design wind turbines and provide electrical control systems inside the turbine that manage voltage, current, frequency, pitch and yaw. At the substation level, we provide interconnection solutions that allow wind farms to meet utility grid code requirements for voltage, power factor and dynamic performance of the plant during unforeseen system disturbances by utilizing our dynamic and static voltage management solutions as well as our harmonic filters. We provide field service and spare parts to our global installed base of over 18 Gigawatts ("GW").
The Global Demand for Critical Materials, Including Semiconductors, Electrification, Industrial Modernization and Power Capacity Expansion:
We provide transformation, rectification, voltage management, and harmonic filtering solutions that help industrial and semiconductor facilities maintain stable, high-quality power for critical operations. At the substation level, our solutions manage input power from the grid and control power for the operation of large-scale industrial equipment such as furnaces, chemical plants, or semiconductor fabrication plants. Our capabilities to control and convert power help ensure continuous flow of stable high-quality power for our customers.
We also provide substation-level sag mitigation systems, which are a substation level power conditioning system. These systems protect and isolate critical manufacturing processes from power system events that could otherwise trip these sensitive processes operations and result in severe disruptions and loss of a customer’s manufactured products. These systems closely monitor incoming electric supply and react in sub-cycle time frames to mitigate voltage sags and swells to provide a conditioned power to the processes. These sag mitigation systems can include both our dynamic and static voltage management as well as our harmonic filter solutions which are specifically designed to improve the facility's overall power factor and harmonic compliance needs.
The Electrification of Naval and Military Capabilities:
We provide advanced ship protection systems, that are designed to help fleets increase system efficiencies, enhance warfare capabilities, and boost reliability, performance, and security. We are developing additional solutions for this important market which may include power management and power generation similar to what we do for electric grids.
Our power system products address the renewable power generation and electrical grid and power infrastructure markets:
Transmission grid. We provide complete systems that enable electric utilities and renewable energy project developers to connect and transmit power with exceptional efficiency, reliability, security and affordability. We provide planning services that allow us to identify power grid congestion, poor power quality, and other risks, which help us determine how our solutions can improve network performance. These services often lead to sales of our grid interconnection solutions and power quality systems for wind farms and solar power plants.
Distribution grid. We provide a direct-connect power quality system that is installed on the primary distribution network in communities, business parks, or wherever enhanced power quality is beneficial and is designed to increase the reliability and resiliency of the distribution grid to serve the needs of modern energy consumers. Our systems save utilities time and money by avoiding costly options to strengthen the distribution grid. Our offerings also serve industrial customers looking to power the energy-intensive factories of the future without the risk of costly power interruptions. These industrial customers utilize our voltage compensators, capacitors, harmonic filters, transformers and rectifiers.
Urban Grid Infrastructure. We design systems to increase the reliability, security and capacity of the urban grid infrastructure. Today, many urban substations are not networked and can only power a small section of a city. Our power dense technology based on proprietary smart materials allows for the inter-connection of substations, controlling the high fault currents that naturally result from such interconnections. If one substation is compromised, other substations help increase capacity and reliability. Our system allows instantaneous power outage recovery, potentially doubling to quadrupling a city’s reliability and resiliency while minimizing grid investment. We design systems that leverage existing grid assets while protecting cities against storms, outages, and cyber- and physical attacks.
Solar Power. Our solutions enable the grid to handle more distributed generation in the form of rooftop solar. Our products are designed to allow the existing grid to handle more renewable capacity.
Wind Power. Our solutions enable manufacturers to field wind turbines with exceptional power output, reliability, and affordability. We supply advanced power electronics and control systems, license our highly engineered wind turbine designs, and provide extensive customer support services to wind turbine manufacturers. Our design portfolio includes a broad range of drive trains and power ratings of 2 megawatts (“MW”) and higher. We provide a broad range of power electronics and software-based control systems that are highly integrated and designed for optimized performance, efficiency, and grid compatibility.
Marine Protection Systems . We sell advanced degaussing systems to the U.S. Navy and the Royal Canadian Navy. Degaussing systems reduce a naval ship's magnetic signature, making it much more difficult for a mine to detect and damage a ship. Our degaussing system is comprised of much smaller, lighter and higher performing HTS cable coils eliminating an estimated 50-80% of the system weight and reducing overall energy consumption versus copper-based degaussing systems.
Our fiscal year begins on April 1 and ends on March 31. When we refer to a particular fiscal year, we are referring to the fiscal year beginning on April 1 of that same year. For example, fiscal 2025 refers to the fiscal year that began on April 1, 2025. Other fiscal years follow similarly.
Competitive strengths
We believe our competitive strengths position us well to execute on our growth plans in the markets we serve.
Lead times. Our manufacturing capabilities, engineering expertise, and streamlined execution enable us to deliver solutions with shorter lead times, helping customers accelerate project schedules and reduce operational risk.
Scalable, low-cost manufacturing platform. Our manufacturing of proprietary wind turbine electrical control systems and power electronics products are primarily assembly operations with minimal fixed costs. We can increase the production of these products at costs that we believe are low relative to our competitors. Our proprietary manufacturing technique for Amperium superconductor wire is modular in nature, which allows us to expand manufacturing capacity at a relatively low incremental cost and differentiate ourselves from solutions assembled in the field.
Differentiated technologies. Our products leverage the Company’s proprietary smart materials and smart software and controls to provide enhanced resiliency and improved performance of megawatt-scale power flow. Conventional conductors of electricity, such as aluminum and copper wire, lose energy due to resistance. Using a compound of yttrium barium copper oxide (“YBCO”), we manufacture and provide high-temperature superconductor ("HTS") wire that can conduct many times more electricity than conventional conductors with minimal power loss. Our proprietary Amperium® superconductor wire was engineered to allow us to tailor the product via laminations to meet the electrical and mechanical performance requirements of widely varying end-use applications, including power cables and fault current limiters f or the Grid market. Our PowerModule™ power converters are based on proprietary software and hardware combinations and are used in a broad array of applications, including our D-VAR® grid interconnection and voltage control systems, as well as our wind turbine electrical control systems. Our unique proprietary cooler technology enables our ship protection systems ("SPS") to perform in harsh environmental conditions in a quiet and manner.
Turnkey systems. We have developed full-system solutions that we sell directly to customers. This business model leverages our applications expertise, drives value beyond our power electronic and our superconductor-based products, and enables us to recognize revenue and take ownership over the marketing and sales of the full systems. Industrial manufacturers of these essential materials must be able to power their factories in ways that scale without adding complexity or size.
Intellectual property portfolio and engineering expertise. We protect our competitive position through a combination of patents, trade secrets, proprietary know-how, confidentiality agreements, and contractual protections. We have a portfolio of awarded patents and patent applications worldwide and have rights through exclusive and non-exclusive licenses to additional patents and patent applications worldwide. In addition, a significant portion of our intellectual property protection is derived from common law rights, copyrights, trade secrets, non-disclosure agreements, and contractual arrangements. We believe our technology and manufacturing knowledge base, customer and product expertise and intellectual property protections collectively provide a strong competitive position.
Unique solutions for the markets we serve. We believe we provide wind turbine manufacturers with a unique and integrated approach for wind turbine design and engineering, customer support services and power electronics and control systems. We also believe we are the only company in the world that is able to provide transmission planning services, grid interconnection and voltage control systems, as well as superconductor-based distribution systems for power grid operators. This unique scope of supply provides us with greater insight into our customers’ evolving needs and greater cross-selling opportunities.
Strategy
Building on these competitive strengths, we plan to focus on driving revenue growth and enhancing our operating results through the objectives defined below.
Powering partners. We strive to ensure customer success by designing, deploying and supporting fit-to purpose solutions that enhance capability without adding complexity or size.
Powering innovation. We deliver innovative ways to harmonize the world's desire for clean energy with the need for reliable power delivery.
Powering resilience. Our technology protects and expands the resiliency of all types of power systems — from renewable generation and urban grids to critical industry, Navy ships and more.
Powering sustainability. Our solutions accelerate renewable generation and distribution, better use of finite resources, and the transition to more efficient power and protection systems and control emissions from power and industrial plants.
Pursuing emerging overseas markets and serving key markets locally. We focus our sales efforts on overseas markets that are investing aggressively in traditional energy, renewable energy and power grid projects. As part of our strategy, we serve our key target markets with local sales and field service personnel, which enables us to understand market dynamics and more effectively anticipate customer needs while also reducing response time. We currently serve target markets such as Australia, Canada, Brazil, Chile, France, India, Japan, Mexico, New Zealand, Peru, Singapore, South Africa, South Korea, Taiwan, the United Kingdom, and the United States.
Grid market overview
Modernizing the global electric grid is widely recognized as essential to maintaining reliability and meeting emerging challenges. These include the increasing frequency of severe weather events (including events resulting from climate change), physical and cybersecurity threats, the rapid expansion of renewable energy—both utility-scale and distributed—and the rise of new customer load types. As electric distribution networks become more complex with the integration of distributed energy resources, automation, and bidirectional power flows, there is a critical need for more accurate, dynamic, and resilient grid systems. Additionally, the rapid growth of data centers, projected to more than double global electricity demand by 2026, presents additional grid planning challenges. Available data further indicate that the existing U.S. electrical grid has been stressed by U.S. wind power generation increasing from 6 GW in 2003 to more than 165 GW in 2025, and photovoltaics ("PV") power generation increasing from almost zero in 2003 to approxi mately 150 GW as of the end of 2025.
The U.S. electric grid is under increasing strain due to a combination of factors: the aging infrastructure, with 70% of transmission lines over 25 years old, the surge in electricity demand driven by data centers, artificial intelligence, and the electrification of transportation, and the rising frequency of extreme weather events exacerbated by climate change. These challenges are compounded by delays in connecting new renewable energy sources to the grid, threatening the stability and reliability of the nation's power supply. These factors, along with the essential role the grid plays in economic resilience, public safety, and national security, have prompted widespread recognition of the urgent need to modernize and fortify the reliability, flexibility, and security of the electric grid.
The Trump administration’s energy policy—focused on boosting domestic energy production, revitalizing U.S. manufacturing, and strengthening military readiness—presents potential opportunities for AMSC’s power systems and naval solutions. The push for traditional power production is fueling industrial growth, which in turn increases demand for a high-performing power grid. This shift has major implications for power quality, capacity and reliability, especially as an aging infrastructure is pushed to meet new demands from energy-intensive sectors like artificial intelligence, cloud computing, and semiconductor manufacturing.
In April 2025, the administration issued an executive order titled "Strengthening the Reliability and Security of the United States Electric Grid," invoking emergency authority to address increasing electricity demand and capacity constraints. This directive empowered the Department of Energy ("DOE") to utilize all available power generation resources to ensure the reliable delivery of electricity, especially in response to the growth of technology-driven sectors. Our Grid product solutions are well-positioned to support power quality in energy-intensive industries such as artificial intelligence, data centers, steel, automotive, chemicals, and semiconductors, among others.
At the same time, the administration's focus on revitalizing U.S. manufacturing is expected to increase advanced manufacturing in the United States. Our Grid products are designed to ensure uptime, maximize throughput, and enhance power quality in distribution networks affected by industrial loads. We are well positioned to help power facilities in ways that scale without adding complexity or size and see this as a potentially favorable opportunity.
The administration’s focus on revitalizing the defense sector and maintaining a world-class Navy further amplifies demand for reliable power supplies in military applications and mission-critical solutions. AMSC’s transformers and power supplies for motor drives are actively supporting the rigorous requirements of critical military infrastructure and equipping the U.S. naval fleet with technologies that enhance performance and protection—enhancing operational readiness both domestically and globally.
We believe we are well positioned to seize the numerous opportunities presented by these policies.
Power grid operators worldwide face various challenges, including:
Resiliency. As our electricity mix changes with the proliferation of renewables and distributed generation, so does the need to strengthen the electric grid. New technologies such as the addition of electric vehicles on U.S. roads and urbanization create new challenges for power grid operators.
Stability . Power grid operators are confronting power quality and stability issues arising from intermittent renewable energy sources and from the capacity limitations of transmission and overhead distribution lines and underground cables.
Reliability . Traditional transmission lines and cables often reach their reliable voltage stability limit well below their thermal threshold. Driving more power through a power grid when some lines and cables are operating above their voltage stability limit during times of peak demand can cause either unacceptably low voltage in the power grid (a brownout) or risk of a sudden, uncontrollable voltage collapse (a blackout).
Capacity . The traditional way to enable increases in power grid capacity without losing voltage stability is to install more overhead power lines and underground cables. However, permitting new transmission and distribution lines can take 10 years or more due to various public policy issues, such as environmental, aesthetic, and health concerns. In urban and metropolitan areas, installing additional conventional underground copper cables is similarly challenging, since many existing underground corridors carrying power distribution cables are already filled to their physical capacity and cannot accommodate any additional conventional cables. In addition, adding new conduits requires excavation to expand existing corridors or create new corridors, which are costly and disruptive undertakings.
Efficiency . Most overhead lines and underground cables use traditional conductors such as copper and aluminum, which lose power due to electrical resistance. At transmission voltage, electrical losses average about 7% in the United States and other developed nations, but can exceed 20% in some locations due to the distance of the line, quality of the conductor, and the power grid’s architecture and characteristics, among other factors.
Security . Catastrophic equipment failures caused by aging equipment, physical and cyber events, and weather or climate-related disasters can leave entire sections of an urban environment without power for hours or days. It can be difficult to recover from extended power outages in urban load centers, worsening situations where the personal safety of residents and the economic health of businesses are threatened.
Our solutions for the power quality and grid infrastructure market
We address these challenges in the grid market by providing services and solutions designed to increase the power grid’s capacity, resiliency, reliability, security and efficiency. Our solutions include:
D-VAR ® Systems . Our D-VAR system consists of power electronics and other static components used for controlling power flow and voltage in the AC transmission system. Our D-VAR system aims to increase controllability and power transferability of a network, which allows more effective utilization of existing assets, and reduces the need for new transmission lines and facilities to increase electricity availability. The power that flows through AC networks comprises both real power, measured in watts, and reactive power, measured in Volt Amp Reactive (“VARs”). In simple terms, reactive power is required to support voltage in the power network. D-VAR systems can provide the reactive power needed to stabilize voltage on the grid. These systems also can be used to connect wind farms and solar power plants to the power grid seamlessly as well as to protect certain industrial facilities against voltage swells and sags. Our D-VAR sales process begins with our group of experienced transmission planners working with power grid operators, renewable energy developers, and industrial system operators to identify power grid constraints and determine how our solutions might improve network performance. These services often lead to sales of grid interconnection solutions for wind farms and solar power plants, and power quality systems for utilities and heavy industrial operations.
Transformers and DC Rectifiers. Our custom transformers and rectifiers combine to form power electronic systems which consists of heavy-duty industrial rectifier transformers and direct current (DC) rectifiers. These systems are installed to produce DC power for electrolytic, furnace, and special processes. They are utilized in all industries including renewables, industrial, chemical, mining, and petro-chemical industries. Through Comtrafo, we also offer a comprehensive transformer portfolio spanning low- and medium-voltage applications through high-voltage transmission projects. This includes oil-filled transformers up to 36 kV, dry-type transformers for indoor and safety-critical applications, and power transformers up to 245 kV and 250 MVA for transmission and large industrial uses. These products are designed to meet international standards and customer-specific requirements across power generation, transmission and distribution, and industrial markets.
Power Supplies and Military-Grade Magnetics Applications. Our Power Supplies play a vital role in electrostatic precipitator systems ("ESP"), helping utility and industrial customers reduce airborne particulate emissions and meet environmental compliance standards. In the defense sector, our Military Application Magnetics—such as transformers and inductors—are engineered for performance and durability across shipboard, land-based, and airborne electrical systems supporting U.S. and allied operations. We also provide high-capacity transformers designed for megawatt-scale industrial motor drives, ensuring reliable power for demanding industrial applications.
Power Factor Correction Solutions. Our medium voltage metal-enclosed shunt power capacitor banks are custom designed for application on industrial, commercial, and utility power systems that require medium voltage power factor correction. Our capacitor banks are customized to meet our customer's site and system requirements and can be configured to include some or all protection, control, switching, disconnecting and grounding functions. Our medium voltage metal-enclosed harmonic filter banks are custom designed for application on industrial, commercial, and utility power systems that require medium voltage power factor correction, var and voltage support, and mitigation from harmonic resonance or harmonic distortion.
actiVAR ® Systems . Our actiVAR system is a fast-switching medium-voltage reactive compensation solution that utilizes passive, fast-switching, and transient-free switching devices. The actiVAR mitigates voltage sags and reduces large inrush currents associated with starting large medium-voltage motors across-the-line. Large motors require significant amounts of reactive power to start. The flow of VARs across the power system network results in voltage sags which cause power quality issues to nearby utility customers, as well as a reduction in the motors ability to start. Traditional solutions to solve these problems utilize complex and costly adjustable speed drives and synchronous transfer switchgear solutions. The actiVAR replaces these items at a fraction of the cost. The solution is prevalent in the pump and compressors stations utilized in industrial trades. Our actiVAR sales process begins with the engineering and procurement companies during feasibility studies. We identify viable projects for this solution and assist with performance and rating calculations, which eventually lead to the adaption and purchase of the actiVAR solution.
armorVAR™ Systems . Our armorVAR system consists of conventionally switched medium-voltage metal-enclosed capacitor banks and harmonic filter banks. These systems are installed for reactive compensation, power factor correction, loss reduction, utility bill savings, and mitigation of common power quality concerns related to power converter-based generation and load devices. They are utilized in all industries including renewables, industrial, utility, commercial, mining, and petro-chemical industries. Our armorVAR systems also support the base VAR requirements of renewable power plants and can include fully integrated D-VAR and D-VAR VVO® solutions to form more advanced hybrid solutions that are more economical and easier to install.
D-VAR VVO®. Our D-VAR VVO serves the distribution power grid market. VVO is designed to be a direct-connect 15 kilovolt class reactive power system for a utility's distribution network to optimally control voltage as distribution networks are increasingly impacted by distributed generation, such as roof top and community solar, and to correct disturbances caused by heavy transient loads. We believe VVO has the potential to save utilities time and money by avoiding costly options to increase the reliability and resiliency of the distribution grid and to allow utilities to build a “plug 'n play” network to serve the demands of modern energy consumers. Our VVO target markets are electric distribution grids incorporating distributed generation, including where utility grid modernization attributes such as the following are applicable: mandated efficiency upgrades, mass adoption of rooftop solar, community solar, utility-owned micro-grids, variable load conditions on the distribution grid and voltage regulations alternatives.
REG Systems . Our REG system has two primary applications that increase the reliability and the capacity of the urban infrastructure. For applications focused on reliability improvement, the REG system is used in a “ring” or “loop” configuration to interconnect nearby urban substations. This enables urban utilities to share transmission connections and excess station capacity, while controlling the high fault currents that naturally result from such interconnections, providing protection against the adverse effects that follow the loss of critical substation facilities in urban areas. We believe a utility installing our REG system could double or quadruple its reliability (e.g. N-1 to N-2, or greater) by networking substations, which is a solution that utilities would generally not consider when using conventional technology in urban settings due to its disruptive nature and economic disadvantages. For applications focused on capacity improvement, the REG system can be used in a “branch” configuration. In this application, the REG system connects an existing large urban substation with a new, much smaller, and more simplified substation within the city at a lower cost. The smaller urban substation does not need large power transformers and takes up much less space, thereby significantly reducing real estate, construction, and other related costs in the urban area. The key component to the REG system is a cable system that combines very high-power handling capacity with current limiting characteristics - features that are attributable to our proprietary Amperium HTS wire.
Marine market overview
Defense spending has increased over the past eight years as the U.S. military moves to rebuild and retool for competition against other great powers. In January 2025, the U.S. Navy’s 2025 shipbuilding plan covering government fiscal years 2025 to 2054, calls for a larger and more distributed fleet. To achieve that goal, the Navy would buy 364 ships over the 2025–2054 period: 293 combat ships and 71 combat logistics and support ships. Recent shipbuilding initiatives over the past year, including the Navy's FY27 budget request, suggest that spending levels and the goals for numbers of ships will further increase. For a description of risks related to our government contracts, see Part I, Item" 1A, “Risk Factors – Our contracts with the U.S. government are subject to audit, modification or termination by the U.S. government and include certain other provisions in favor of the government. The continued funding of such contracts remains subject to annual congressional appropriation, which, if not approved, could reduce our revenue and lower or eliminate our profit."
Navy fleets worldwide face various challenges, including:
Power Capacity. Today’s Navy continues to see increased demand for more power applied from both on and off the ship (shore power). This need is driven by many factors, including the continued development of high-power density advanced weapons systems and sensors. Many power dense applications that naval engineers are working on today are already relying on the independent development of improved power distribution systems for their implementation. Free Electron Lasers, High Power Radar, Laser Self Defense Systems, and Active Denial (Directed Energy) systems are just a few of the Navy applications that we believe will demand higher capacity and more efficient energy transfer before deployment to a platform in the fleet can be realized.
Space and Weight Limitations. Advances in sensors and weapons for modern ship applications are expected to drive the need for new power solutions to be light and compact, for weapons’ power draw to be more efficiently cooled and for easing installation on new ships and enabling upgrades on existing ones.
Efficiency. Increased power demands for routine (peacetime) operations are straining the conventional copper-based power cable systems that are currently used. The copper cables are very heavy, cumbersome, and hard to handle. The weight of the cables requires a coordinated effort between a crew on the pier and a crew on the ship. In many instances, handling these cables requires the use of a crane or a boom truck to extend them from the pier-side power substations up to the ship’s connection point. More efficient, compact, lighter weight power transfer and distribution systems are expected to be required for tomorrow’s Navy to satisfy its future mission requirements.
Signature Protection. Since WWII, the Navy fleet has protected its warfare vessels with copper-based degaussing systems. Our HTS-based degaussing system provides world class mine protection while reducing the weight of the degaussing system by an estimated 50-80% and reducing energy consumption. We believe that our HTS systems are an enabling technology for the U.S. Navy in its mission to create an all-electric ship (Super Ship). Our HTS-based SPS degaussing system has been designed into the San Antonio-class amphibious warfare ship platform, with the first system delivered in January 2022 deployed on the USS Fort Lauderdale. In 2025, we delivered an additional HTS-based SPS system for the USS Richard M. McCool Jr. We continue to collaborate with the U.S. Navy on potential additional opportunities for our advanced HTS-based ship protection systems. The core components of the ship protection system are common and transferable to other applications being targeted for ship implementation.
Our solutions for the marine market
Each Navy ship can be thought of as having its own power grid. We provide advanced ship protection systems, power management, and power generation systems that are designed to help fleets increase system efficiencies, enhance warfare capabilities, and boost reliability, performance and security. Our systems have been deployed across a range of naval applications, helping improve mission capability, increase operational efficiency, and reduce execution times.
Our ship protection systems reduce a vessel’s magnetic signature, making ships harder to detect by magnetic sensors and magnetically activated mines. AMSC’s proprietary technology delivers this protection with significantly lower weight and reduced power and space requirements, preserving critical onboard capacity for mission operations.
We also provide power solutions that support shipyard operations by delivering reliable power to vessels during assembly, maintenance, and docking when ships are disconnected from external power sources. In addition, our technology supports naval propulsion motors and power generators, where its compact, efficient, and high-power-density design enables greater onboard power generation and enhanced capabilities for next-generation naval vessels.
Wind market overview
The global energy mix has seen a growing proportion of renewable energy, including wind power. Wind power is unlimited in supply and its generation has very few emissions. Wind power has become a major pillar of power supply in many parts of the world.
According to the Global Wind Energy Council (GWEC), a research firm, approximately 151 GW of wind generation capacity was expected worldwide in calendar 2025, as compared to nearly 117 GW in calendar 2024. GWEC anticipates that more than 162 GW of additional capacity will be added in 2026.
According to GlobalData, annual wind installations in India for calendar 2025 were 6.3 GW and for calendar 2026 are estimated to be above 6 GW.
Several factors are expected to drive the future growth in the wind power market, including substantial government incentives and mandates that have been established in some countries, technological improvements, turbine cost reductions, the development of the offshore wind market, and increasing cost competitiveness with existing power generation technologies. Technological advances, declining turbine production cost and fluctuating prices for some fossil fuels continue to increase the competitiveness of wind versus traditional power generation technologies.
Our solutions for the wind market
We address the challenges of the wind power market by designing and engineering wind turbines, providing extensive support services to wind turbine manufacturers, and manufacturing and selling critical components for wind turbines.
Electrical Control Systems. We provide full electrical control systems (“ECS”) to manufacturers of wind turbines designed by us. Our ECS regulate voltage, control power flows and maximize wind turbine efficiency, among other functions. To date, we have shipped core electrical components and complete ECS sufficient to power over 18,000 MWs of wind power. We believe our ECS represent approximately at least 10% of a wind turbine’s bill of materials.
Wind Turbine Designs. We design and develop entire state-of-the-art onshore and offshore wind turbines with power ratings of 2 MWs and higher for manufacturers who are in the business of producing wind turbines or who plan to enter the business of manufacturing wind turbines. These customers typically pay us licensing fees, and in some cases royalties, for wind turbine designs, and purchase from us the ECS needed to operate the wind turbines.
Customer Support Services . We provide extensive customer support services to wind turbine manufacturers. These services range from providing designs for customers’ wind turbine manufacturing plants to establishing and localizing their supply chains and training their employees on proper wind turbine installation and maintenance. We believe these services enable customers to accelerate their entry into the wind turbine manufacturing market and lower the cost of their wind turbine platforms.
Our approach to the wind energy markets allows our customers to use our world-class turbine engineering capabilities while minimizing their research and development costs. These services and our advanced ECS provide our customers with the ability to produce standardized or next-generation wind turbines at scale for their local market or the global market quickly and cost-effectively. Our team of highly experienced engineers works with clients to customize turbine designs specifically tailored to local markets while providing ongoing access to field services support and future technological advances.
Customers
We serve customers globally through a localized sales and field service presence in our core target markets. We have served over 100 customers in the grid market since our inception, including a variety of U.S based power utilities, Huntington Ingalls Shipbuilding, Innomotics LLC, the U.S. Navy, Capital Power Corp., Targa Resources Corp., Micron Technology Inc., SSE plc in the United Kingdom, Consolidated Power Projects (Pty) Ltd in South Africa, the Royal Canadian Navy in Canada, Fuji Bridex in Singapore, Copel Distribuição in Brazil and Ergon Energy in Australia. Additionally, our sales personnel in the United States are supported by manufacturers' sales representatives. We have designed w ind turbines for and licensed wind turbine designs to wind turbine manufacturing customers including Inox Wind Limited ("Inox") in India and Doosan Heavy Industries (“Doosan”) in South Korea.
In fiscal 2025, Inox accounted for 15% and Fuji Bridex accounted for 10% of our total revenues. In fiscal 2024, Inox accounted for 14% of our total revenues. In fiscal 2023, Inox accounted for 13% of our total revenues. No other customer accounted for more than 10% of our total revenues in each of fiscal 2025, 2024, and 2023.
Facilities and Manufacturing
Our primary facilities and their primary functions are as follows:
Ayer, Massachusetts — Corporate headquarters; Grid segment manufacturing, and research and development
Bordentown, New Jersey — Grid segment manufacturing
Cornélio Procópio, Brazil — Grid segment manufacturing
Klagenfurt, Austria —Wind segment engineering, research and development, and customer support
New Milford, Connecticut — Grid segment manufacturing
Pewaukee, Wisconsin — Grid segment research and development
Queensbury, New York — Grid segment manufacturing
Richland, Washington — Grid segment research and development
Florence, New Jersey — Grid segment manufacturing
Silesian, Poland — Grid segment manufacturing
Westminster, Massachusetts — Grid segment manufacturing
Our global footprint also includes sales and/or field service offices in Australia, Brazil, India, South Korea, the United Kingdom and McLean, VA.
The principal raw materials used in the manufacture of the Company’s products are nickel, silver, yttrium, copper, brass, and stainless steel. Major components are insulated gate bi-polar transistors, heatsinks, inductors, enclosures, transformers, and printed circuit boards. Most of these raw materials are available from multiple sources in the United States and world markets. Generally, the Company believes that adequate alternative sources are available for the majority of its key raw material and purchased component needs, however, the Company is dependent on a single or limited number of suppliers for certain materials and components. In addition, new or proposed tariff increases on our raw materials, in particular stainless steel, may increase prices for such raw materials and/or may create shortages as customers seek alternative suppliers.
Sales and Marketing
Our strategy is to serve customers locally in our core target markets through a direct sales force operating out of sales offices worldwide. In addition, we utilize manufacturers’ sales representatives to market our products to utilities. The sales force also leverages business development staff for our various offerings as well as our team of wind turbine engineers and power grid transmission planners, all of whom help to ensure that we have an in-depth understanding of customer needs and provide cost-effective solutions for those needs.
Segments
We segment our operations into two market-facing business segments: Grid and Wind. We believe this market-centric structure enables us to more effectively anticipate and meet the needs of power generators, power utilities, industrial manufacturers, the military and renewable energy companies.
Competition
We face competition in various aspects of our technology and product development. We face competition across our new energy systems product lines from companies like ABB, Hitachi, Ingeteam, Mitsubishi and Siemens. We face more local competition in a subset of our business like power quality by companies that include Southern States, Controllix, Powerside, Elgin Power, Scott Manufacturing and QVARx, and we face competition on our power transformers and power supplies from companies like Friem, Dynapower, Nidec, Espey Manufacturing, Hammond, WEG S.A., and Kraft Powercon. We believe that competitive performance in the marketplace depends upon several factors, including technical innovation, range of products and services, product quality and reliability, customer service and technical support.
With our HTS-based REG product, we are offering a new approach that provides alternatives to utilities for power system design. Therefore, we believe that we compete with traditional approaches such as new full-sized substations, overhead and underground transmission, and urban power transformers.
We believe we are currently the only company that can offer HTS-based SPS products that have been fully qualified for use aboard U.S. Navy surface combatants. Therefore, the primary competition for our SPS products is currently coming from defense contractors that provide the copper-based systems that our lighter, more efficient HTS versions have been developed to replace. Companies such as Ultra Maritime, L3 Harris, and Raytheon have the bulk of the business today.
Our power module conversion equipment and our electrical control systems are designed and integrated into our wind turbine designs in a way to achieve maximum performance of the turbine. Typically, we are the exclusive provider of the power module conversion equipment and electrical control systems for our wind turbine designs. As a result, our power conversion equipment and electrical control systems see limited competition. Other companies that serve the wind turbine components industry include ABB. We also face indirect competition in the wind energy market from global manufacturers of wind turbines, such as Siemens, Vestas, and Suzlon. We face competition for the supply of wind turbine engineering design services from design engineering firms such as Aerovide and W2E.
Intellectual Property
Patent Background
We protect our intellectual property through a combination of patents, trade secrets, proprietary know-how, non-disclosure agreements, and other contractual protections. Our intellectual property (“IP”) portfolio includes patents we own, patents we license from others and significant proprietary know-how and trade secrets, particularly in connection with our recently acquired businesses. We devote substantial resources to protecting our intellectual property position. Together with the international counterparts of our patents and patent applications, we own a portfolio of patents and patent applications worldwide and have rights through exclusive and non-exclusive licenses. Following our acquisition of Comtrafo, a substantial portion of our overall IP protection is derived from copyrights, common law rights, trade secrets, and contractual arrangements, including non-disclosure agreements. We believe that our current intellectual property protections, together with our ability to obtain licenses from other parties to the extent necessary, will provide us with sufficient proprietary rights to develop and sell our products. However, for the reasons described below, we cannot assure you that this will be the case.
Despite our intellectual property protections, a number of U.S. and foreign patents and patent applications of third parties relate to our current products, to products we are developing, or to technology we are now using in the development or production of our products. We may need to acquire licenses to those patents, contest the scope or validity of those patents, or design around patented processes or products as necessary. If companies holding patents or patent applications that we need to license are competitors, we believe our patent portfolio may improve our ability to enter into license or cross-license arrangements with these companies. We have already successfully negotiated cross-licenses with several competitors.
Failure to obtain all necessary patents, licenses and other IP rights upon reasonable terms could significantly reduce the scope of our business and have a material adverse effect on our results of operations. We do not know the likelihood of successfully contesting the scope or validity of patents held by others. In any event, we could incur substantial costs in challenging the patents of other companies. Moreover, third parties could challenge some of our patents or patent applications, and we could incur substantial costs in defending the scope and validity of our own patents or patent applications whether or not a challenge is ultimately successful.
Grid Patents
We have received patents and filed numerous additional patent applications on power quality and reliability systems, including our D-VAR products. Our products are covered by patents and patents pending worldwide on both our systems and power converter products. The patents and applications focus on inventions that significantly improve product performance and reduce product costs, thereby providing a competitive advantage. Our grid patents will begin to expire in 2027, with the latest set to expire in 2041.
HTS Patents
Since the discovery of high temperature superconductors in 1986, rapid technical advances have characterized the HTS industry, which in turn have resulted in a large number of patents, including overlapping patents, relating to superconductivity. As a result, the patent situation in the field of HTS technology and products is unusually complex. We have obtained licenses to patents and patent applications covering some HTS materials. We currently have non-exclusive rights to a fundamental U.S. patent (U.S. 8,060,169 B1) covering 2G and similar HTS wire and applications and may elect in the future to allow our rights under this license to lapse. In addition to our owned patents and patent applications in 2G HTS wire, we have obtained licenses from (i) MIT for the MOD process we use to deposit the YBCO layer, and (ii) Alcatel-Lucent on the YBCO material. However, we may have to obtain additional licenses to HTS materials. Our HTS wire patents began to expire in 2024, with the latest set to expire in 2041.
In addition to HTS wire patents, we have extensive patents and patents pending covering applications of HTS wire, such as HTS fault current limiting technology including our fault current limiting cable, HTS rotating machines and ship protection systems. Our HTS application patents will begin to expire in 2027, with the latest set to expire in 2040. Since the superconductor rotating machine and the fault current limiting cable applications are relatively new, we believe that we have a strong patent position in these areas. We also believe we have one of the broadest and most fundamental patent position in superconductor rotating machines technology. We have a series of patents on our concept for our proprietary fault current limiting technology. However, there can be no assurance that that these patents will be sufficient to assure our freedom of action in these fields without further licensing from others. See Part I, Item 1A, “Risk Factors,” for more information regarding the status of the commercialization of our Amperium wire products.
Wind Patents
Under our Windtec™ Solutions brand, we design a variety of wind turbine systems and license these designs, including expertise and patent rights, to third parties for an upfront fee, plus in some cases, future royalties. Our wind turbine designs are covered by patents worldwide on wind turbine technology. We have patent coverage on the unique design features of our blade pitch control system, which ensures optimal aerodynamic flow conditions on the turbine blades and improves system efficiency and performance. Our wind patents began to expire in 2025, with the latest set to expire in 2039.
Trade Secrets
Significant portions of the important technology used in our operations and products is not covered by any patent or patent application owned by or licensed to us, but are instead protected as trade secrets and through contractual agreements, including non-disclosure agreements. We take steps to maintain the confidentiality of this technology by requiring all employees and all consultants to sign confidentiality agreements and by limiting access to confidential information. We cannot provide any assurance that these measures will prevent the unauthorized disclosure or use of that information. In addition, we cannot provide any assurance that others, including our competitors, will not independently develop the same or comparable technology that is one of our trade secrets.
Human Capital
We aim to provide a safe and positive work environment for our employees that emphasizes respect for individuals and high standards of integrity. The health and safety of our employees is of utmost importance to us. Recognizing and respecting our global presence, we strive to maintain an inclusive workforce, where anyone can reach their potential regardless of background, everywhere we operate. As of March 31, 2026, we employed 1,195 employees. A portion of our Brazilian employees are represented by a labor union.
We believe our employees are the foundation of our success and that our future growth depends, in part, on our ability to continue to attract and retain the best and brightest talent, including key management professionals, scientists, engineers, researchers, manufacturing personnel, and marketing and sales professionals. In order for us to attract the best talent, we provide a collaborative, inclusive and innovative work environment, competitive compensation, and opportunities for our employees to grow. We are focused on continuing to build an inclusive culture that inspires leadership, encourages innovative thinking, and supports the development and advancement of all.
Our human capital management objectives include attracting, incentivizing, and integrating our existing and future employees. We strive to attract and retain talented employees by offering competitive compensation and benefits that support their health and financial well-being. We use a combination of fixed and variable pay including base salary, bonuses, performance awards and stock-based compensation. The principal purposes of our equity incentive plans are to attract, retain and motivate employees through the granting of stock-based compensation awards. We offer employees benefits that vary by country and are designed to address local laws and cultures and to be competitive in the marketplace.
Available information
Our internet address is www.amsc.com. We are not including the information contained in our website as part of, or incorporating it by reference into, this document. We make available, free of charge, through our website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after we electronically file such materials with, or furnish such materials to, the SEC.
We intend to disclose on our website any amendments to, or waivers of, our Code of Business Conduct and Ethics that are required to be disclosed pursuant to the SEC or the rules of the Nasdaq Stock Market, LLC.
Information about our Executive Officers
The table and biographical summaries set forth below contain information with respect to our executive officers as of the date of this filing:
Name
Age
Position
Daniel P. McGahn
President, Chief Executive Officer and Chairman
John W. Kosiba, Jr.
Senior Vice President, Chief Financial Officer and Treasurer
Daniel P. McGahn joined us in December 2006 and has been chief executive officer and a member of our board of directors since June 2011 and chairman of the board since July 2018. He previously served as president and chief operating officer from December 2009 to June 2011, as senior vice president and general manager of our AMSC Superconductors business unit from April 2008 until December 2009, as vice president of our AMSC Superconductors business unit from March 2007 to April 2008 and as vice president of strategic planning and development from December 2006 to March 2007. From 2003 to 2006, Mr. McGahn served as executive vice president and chief marketing officer of Konarka Technologies. We believe Mr. McGahn’s qualifications to sit on our board of directors include his extensive experience with our company, including serving as our president since 2009, experience in the power electronics industry and strategic planning expertise gained while working in senior management as a consultant for other public and private companies.
John W. Kosiba, Jr. has served as senior vice president, chief financial officer and treasurer since April 4, 2017. Mr. Kosiba joined us as managing director, finance operations, in June 2010. He then served as vice president, finance operations, from September 2011 to May 2013. Prior to his appointment as senior vice president and chief financial officer, Mr. Kosiba served most recently as senior vice president, Gridtec solutions and finance operations, where he was responsible for (i) overseeing finance and accounting operations, budgeting, strategic planning and financial planning and analysis for the company, and (ii) managing the day-to-day business operations of our Gridtec solutions’ business segment. From January 2008 until June 2010, Mr. Kosiba served as division director and controller of Amphenol Aerospace, a division of Amphenol Corporation and a manufacturer of interconnect products for the military, commercial aerospace and industrial markets. In this role, Mr. Kosiba was responsible for overseeing finance, accounting, budgeting, audit and all aspects of financial planning and analysis for the division.
Item 1A.
RISK FACTORS
Risks Related to Our Operations
If we fail to implement our business strategy successfully, our financial performance could be harmed.
Our future financial performance and success are dependent in large part upon our ability to implement our business strategy successfully. Our business strategy envisions several initiatives, including driving revenue growth and enhancing operating results by increasing customer adoption of our products by targeting high-growth segments with commercial and system-level products as well as identifying and completing opportunistic acquisitions. We may not be able to implement our business strategy successfully or achieve the anticipated benefits of our business plan. If we are unable to do so, our long-term growth and profitability may be adversely affected. Even if we are able to implement some or all of the initiatives of our business plan successfully, our operating results may not improve to the extent we anticipate, or at all. In addition, to the extent we have the nature and extent of industry trends or our competition, we may have in our strategic objectives. Any to implement our business strategy may affect our business, financial condition and results of operations. In addition, we may decide to alter or certain aspects of our business strategy at any time.
Our ability to implement our business strategy could also be affected by a number of factors beyond our control, such as increased competition, legal developments, government regulation, general economic conditions, including as a result of the ongoing wars between Russia and Ukraine and in the Middle East and trade conflicts, or increased operating costs or expenses.
We may not realize all of the sales expected from our backlog of orders and contracts.
We cannot assure you that we will realize the revenue we expect to generate from our backlog in the periods we expect to realize such revenue, or at all.
In addition, the backlog of orders, if realized, may not result in profitable revenue. Backlog represents the value of contracts and purchase orders received for which delivery is expected in the next twelve months. Our customers have the right under some circumstances and with some penalties or consequences to terminate, reduce or defer firm orders that we have in backlog. In addition, our government contracts are subject to the risks described below. If our customers terminate, reduce or defer firm orders, we may be protected from certain costs and losses, but our sales will nevertheless be adversely affected, and we may not generate the revenue we expect.
Although we strive to maintain ongoing relationships with our customers, there is an ongoing risk that they may cancel orders or reschedule orders due to fluctuations in their business needs or purchasing budgets.
This has had, and may continue to have, an adverse effect on our ability to grow our revenues. In addition, current and future suppliers may be less likely to grant us credit, resulting in a negative impact on our working capital and cash flows.
We rely upon third-party suppliers for the components and subassemblies of many of our Grid and Wind products, making us vulnerable to supply shortages and price fluctuations, which could harm our business.
Many of our components and subassemblies are currently manufactured for us by a limited number of qualified suppliers. Any interruption in the supply of components or subassemblies, or our inability to obtain substitute components or subassemblies from alternate sources at acceptable prices in a timely manner, could impair our ability to meet the demand of our customers, which would have an adverse effect on our business and operating results. Moreover, if the costs of acquiring components and subassemblies from these suppliers significantly increase, we may not be able to identify alternative suppliers, which could adversely impact our business and operating results.
In order to minimize costs and time to market, we have and will continue to identify local suppliers that meet our quality standards to produce certain of our subassemblies and components. These efforts may not be successful including as quality standards evolve. For example, there are increasing expectations in various jurisdictions that companies monitor the environmental, social, and/or geographic provenance of their supply chain; complying with such expectations may cause us to incur additional costs, subject us to increased scrutiny, reduce the number of acceptable suppliers, or otherwise impact our business or operations. In addition, any event that negatively impacts our supply, including, among others, wars, terrorist activities, cyberattacks, natural disasters, trade policy and outbreaks of infectious disease, could delay or suspend shipments of products or the release of new products or could result in the delivery of inferior products. Our revenues from the affected products would decline or we could incur losses until such time as we are to restore our production processes or put in place alternative contract manufacturers or suppliers. Even though we carry business insurance policies, we may as a result of business that exceed the coverage available under our insurance policies.
We may acquire additional complementary businesses or technologies, which may require us to incur substantial costs for which we may never realize the anticipated benefits.
Our recent acquisitions have required substantial integration and management efforts. As a result of any additional acquisition we pursue, management’s attention and resources may be further diverted from our other businesses. An acquisition may also involve the payment of a significant purchase price, which could reduce our cash position or dilute our stockholders and require significant transaction-related expenses.
Achieving the benefits of any acquisition involves additional risks, including:
difficulty integrating acquired operations, technologies and personnel;
inability to retain management and other key personnel of the acquired business;
changes in management or other key personnel that may harm relationships with the acquired business’s customers and employees;
unforeseen liabilities of the acquired business;
diversion of management’s and employees’ attention from other business matters as a result of the integration process;
mistaken assumptions about volumes, revenues and costs associated with the acquired business, including synergies;
limitations on indemnification from the seller;
mistaken assumptions about the overall costs of equity or debt used to finance the acquisition; and
unforeseen difficulties operating in new product areas, with new customers, or in new geographic areas, including in emerging markets.
We cannot provide any assurance that we will realize any of the anticipated benefits of any acquisition, including our acquisition of Comtrafo Indústria de Transformadores Elétricos S.A. (“Comtrafo”), completed in December 2025, and Megatran Industries, Inc. including its subsidiaries, completed in August 2024, and if we fail to realize these anticipated benefits, our operating performance could suffer.
Our business and operations may be materially adversely impacted in the event of a failure or security breach of our or any critical third parties' IT Systems or Confidential Information.
We rely upon the capacity, reliability, and security of information technology hardware and software infrastructure and networks (collectively, "IT Systems"), and our ability to expand and update such IT Systems in response to our changing needs. We manage certain IT Systems but also rely on IT Systems and various products and services provided by critical third-party vendors and others in the supply chain. We also collect, store, and otherwise process sensitive, personal and confidential information ("Confidential Information") in the ordinary course of our business. Any failure to manage, expand, or update our IT Systems or Confidential Information or any disruption to or failure in the operation of such IT Systems or Confidential Information could materially harm our business. In addition, the costs associated with updating and securing our IT Systems or Confidential Information are likely to increase as such security measures become more complex, which may harm our operating results and financial condition.
We face numerous and evolving cybersecurity risks that threaten the confidentiality, integrity and availability of our IT Systems and Confidential Information. Our IT Systems, and those of the third-party vendors we rely on, as well as our Confidential Information, are vulnerable to disruption, compromise and damage from computer viruses (including malware and ransomware), bugs, misconfigurations or vulnerabilities, social engineering/phishing, natural disasters, human or technical error, intentional conduct, cyberattacks, unauthorized access and other similar disruptions. Because we rely on certain third party vendors that support our operations, successful cyberattacks that disrupt or result in access to third-party IT Systems can materially impact our operations and financial results. There can also be no assurance that our cybersecurity risk management program and processes, including our policies, controls or procedures, or the processes of third-party vendors we rely on, will be fully implemented, complied with or in protecting our IT Systems and Confidential Information. Our business is also subject to -ins, , and acts of by third parties as well as employees. We cannot guarantee the security or protection of any IT Systems or Confidential Information. are expected to accelerate on a global basis in frequency and magnitude, particularly as actors, such as ransomware groups, are becoming increasingly sophisticated in using techniques and tools, including artificial intelligence, that are designed to controls, detection and remove or obfuscate forensic evidence. As a result, we and our third-party providers may be to timely or effectively anticipate, detect, , remediate or recover from in the future or avoid material impact to our IT Systems, Confidential Information, and our business. We also face increased cyber risk due to the number of our and others' employees who are (and may continue to be) working remotely due to the associated with managing remote computing assets and security that are present in many non-corporate and home networks.
We and certain of our third-party providers regularly experience cyberattacks and other incidents, and we expect such attacks and incidents to continue in varying degrees. While to date no incidents have had a material impact on our operations or financial results, we cannot guarantee that material incidents will not occur in the future. Any adverse impact to the availability, integrity or confidentiality of our IT Systems or those of third parties upon which we rely could result in disruptions to our operations, and/or loss, damage or compromise Confidential Information. Any or all of the foregoing could harm our reputation, result in substantial remediation, incident response, system restoration and compliance costs, lead to lost revenues and business opportunities, lead to regulatory and enforcement and/or (such as class actions), and related or , increase our insurance premiums and have other materially effects on our business and results. Our insurance policies may not cover, or may be to cover, any or all costs, and liability associated with any , security or other and we cannot guarantee that applicable insurance will be available to us in the future on economically reasonable terms or at all. Any or all of the foregoing could materially affect our business, operating results, and financial condition.
Our contracts with the U.S. and Canadian governments are subject to audit, modification or termination by such governments and include certain other provisions in favor of the governments. The continued funding of such contracts may remain subject to annual legislative appropriation, which, if not approved, could reduce our revenue and lower or eliminate our profit.
As a company that contracts with the U.S. and Canadian governments, we are subject to financial audits and other reviews by such governments of our costs and performance, accounting, and general business practices relating to these contracts. Based on the results of these audits, such governments may adjust our contract-related costs and fees. We cannot be certain that adjustments arising from government audits and reviews would not have a material adverse effect on our results of operations.
Our government contracts customarily contain other provisions that give the government substantial rights and remedies, many of which are not typically found in commercial contracts, including provisions that allow the applicable government to:
obtain certain rights to the intellectual property that we develop under the contract;
decline to award future contracts if actual or apparent organizational conflicts of interest are discovered, or to impose organizational conflict mitigation measures as a condition of eligibility for an award;
suspend or debar us from doing business with the government or a specific government agency; and
pursue criminal or civil remedies under the False Claims Act, False Statements Act and similar remedy provisions unique to government contracting.
All of our U.S. and Canadian government contracts, as well as certain of our contracts with third parties that are dependent on such government contracts, can be terminated by the applicable government for its convenience. Termination-for-convenience provisions typically provide only for our recovery of costs incurred or committed, and for settlement of expenses and profit on work completed prior to termination. In addition to the right of the government to terminate its contracts with us, these government contracts are conditioned upon the continuing approval by the applicable legislature of the necessary spending to honor such contracts. The U.S. Congress often appropriates funds for a program on a fiscal year basis even though contract performance may take more than one year. Consequently, at the beginning of many major governmental programs, contracts often may not be fully funded, and additional monies are then committed to the contract only if, as and when appropriations are made by the U.S. Congress or other applicable body for future fiscal years. In addition, government shutdowns could prevent or delay such contracts from being funded. Failure by the U.S. Congress to further or increase the debt ceiling could or result in the of contracts for the procurement of our products and services, and we may be asked or required to continue to perform for some period of time on certain of our U.S. government contracts, even if the U.S. government is to make timely payments. There can be no assurance that we will not be affected by government cost-cutting measures.
We cannot be certain that our U.S. government contracts, or our contracts with third parties that relate to projects for the U.S. government will not be terminated or suspended in the future. The U.S. government’s termination of, or failure to fully fund, one or more of our contracts would have a negative impact on our operating results and financial condition. Further, in the event that any of our government contracts are terminated for cause, it could affect our ability to obtain future government contracts which could, in turn, seriously harm our ability to develop our technologies and products.
Changes in U.S. government defense spending could negatively impact our financial position, results of operations, liquidity and overall business.
We have several contracts with the U.S. government, including defense-related programs with the U.S. Department of Defense. Changes in U.S. government defense spending for various reasons, including as a result of potential changes in policy positions or priorities that may result from the U.S. presidential and congressional elections, could negatively impact our results of operations, financial condition and liquidity. Our programs are subject to U.S. government policies, budget decisions and appropriation processes which are driven by numerous factors including: (1) geopolitical events; (2) macroeconomic conditions; (3) the ability of the U.S. government to enact relevant legislation, such as appropriations bills; and (4) the spending priorities of the U.S. Presidential Administration. In recent years, U.S. government appropriations have been affected by larger U.S. government budgetary issues and related legislation. In prior years, the U.S. government has been unable to timely complete its budget process before the end of its fiscal year, resulting in governmental shut-downs or providing only enough funds for U.S. government agencies to continue operating at prior-year levels. Significant changes in U.S. government defense spending or changes in U.S. government priorities, policies and requirements could have a material adverse effect on our results of operations, financial condition and liquidity.
Our performance on contracts with the U.S. Department of Defense may result in restrictions to our ability to repurchase our common stock or U.S. government denial of Foreign Military Sales or ceasing of assistance for international Direct Commercial Sales.
On January 7, 2026, the President of the United States signed an Executive Order titled "Prioritizing the Warfighter in Defense Contracting," (the "Executive Order") which directs the Secretary of Defense to identify contractors for critical weapons, supplies, and equipment that have engaged in stock repurchases or dividend distributions and are underperforming on their contracts, not investing capital into necessary production capacity, not prioritizing contract performance, or whose production speed is insufficient (collectively, "Underperformance"). Contractors that fail to remediate their Underperformance may be subject to enforcement actions under the Defense Production Act or contract law. Future defense contract awards will contain provisions prohibiting stock repurchases or dividend distributions and capping executive base salaries during periods of Underperformance as determined by the Secretary of Defense, and will require that executive incentive compensation be linked to on-time delivery of work under defense contracts, increased production, and facilitation of investments and operating improvements. The Secretary of Defense may also deny new advocacy cases for Foreign Military Sales or ongoing advocacy efforts for international Direct Commercial Sales for contractors.
Our failure to sufficiently perform and prioritize our U.S. defense contracts, invest capital into production, capacity, or perform our contracts at the appropriate speed could result in restrictions to our ability to repurchase our common stock, issue dividends, or compete for International Foreign Military Sales or Direct Commercial Sales Contracts. In addition, the U.S. government could terminate our existing contracts or withhold payment for completed work due to Underperformance. The U.S. government could also cap the base salaries for our executives based upon the Secretary of Defense's finding of Underperformance.
Given the recency of the Executive Order, it is unclear how the U.S. government will implement its enforcement provisions or what metrics or conditions the Secretary of Defense will use to identify Underperforming defense contractors. If any of the foregoing were to occur, it could materially harm our business, result in reduced revenue and profitability, damage our reputation and customer relationships, or affect our stock price and increase its volatility.
Failure to comply with evolving data privacy and data protection laws, regulations, and other obligations, or to otherwise protect personal data, may adversely impact our business and financial results.
In connection with running our business, we receive, store, use and otherwise process information that relates to individuals and/or constitutes “personal data,” “personal information,” “personally identifiable information,” or similar terms under applicable data privacy laws (collectively, “Personal Data”).We are therefore subject to many rapidly evolving privacy and data protection laws and regulations in the United States, Europe and around the world. These laws require us to operate in a complex environment where there are significant constraints on how we can process Personal Data across our business. The scope of these laws are changing, subject to differing interpretations, and may be inconsistent among jurisdictions. For example, the European and United Kingdom General Data Protection Regulation, the California Consumer Privacy Act, and the data protection and security laws of other jurisdictions impose onerous obligations — including around transparency, data subject rights, contractual requirements, data breach reporting, and international data transfers — with respect to our processing of Personal Data. We are also subject to certain contractual obligations related to privacy, data protection and data security that may also impose onerous obligations. The legal and regulatory framework for privacy, data protection and data security worldwide is, and is likely to remain for the foreseeable future, uncertain and complex, and it is possible that these or other actual or obligations may be interpreted and applied in a manner that we do not anticipate or that is from one jurisdiction to another, and may with our other legal obligations or our practices. Any or perceived by us to comply with our privacy, data protection and data security obligations may result in substantial , regulatory or enforcement, reputational , orders to /change our use of data, as well as potential civil , including class action , and could result in significant liability (including monetary or requirements to alter our operations), any of which could materially and affect our business, results of operations, and financial condition. Further, any significant change to applicable laws, regulations or industry practices regarding privacy, data protection, and data security could increase our costs and require us to modify our operations, possibly in a material manner.
Our success is dependent upon attracting and retaining qualified personnel and our inability to do so could significantly damage our business and prospects.
We have attracted a highly skilled management team and specialized workforce, including scientists, engineers, researchers, manufacturing, personnel, and marketing and sales professionals. Hiring and retaining good personnel for our business is challenging, and highly qualified technical personnel are likely to remain a limited resource for the foreseeable future. We may not be able to hire the necessary personnel to implement our business strategy. In addition, we may need to provide higher compensation or more training to our personnel than we currently anticipate. Moreover, any officer or employee can terminate his or her relationship with us at any time. Losing the services of any of our executive officers or key employees could materially and adversely impact our business.
A significant portion of our Wind segment revenues are derived from a single customer. If this customer’s business is negatively affected, it could adversely impact our business .
A significant portion of our Wind segment revenues have historically been derived from Inox and a significant decrease in revenues from Inox could adversely impact our Wind segment. Revenues from Inox are supported by supply contracts to purchase wind turbine ECS, and licenses to make, use and supply, wind turbines based on our designs. Inox has been active in the new central and state government auction regime in India and has a cumulative order book of over 3 GW. However, we cannot predict if and how successful Inox will be in executing on these orders or in obtaining new orders under the new central and state auction regime. Any failure by Inox to succeed under this regime, or any delay in Inox’s ability to deliver its wind turbines, could result in fewer ECS shipments to Inox. Inox has historically failed to post letters of credit and take delivery of forecasted ECS quantities.
Our success in addressing the wind energy market is dependent on the manufacturers that license our designs.
Because an important element of our strategy for addressing the wind energy market involves the license of our wind turbine designs to manufacturers of those systems, the financial benefits to us from our products for the wind energy market are dependent on the success of these manufacturers in selling wind turbines based on our designs. We may not be able to enter into marketing or distribution arrangements with third parties on financially acceptable terms, or at all, and third parties may not be successful in selling our products or applications incorporating our products.
Many of our revenue opportunities are dependent upon subcontractors and other business collaborators.
Many of the revenue opportunities for our business involve projects, such as the installation of our ship protection systems and electrical system hardware in wind turbines, in which we collaborate with other companies, including suppliers of cryogenic systems, manufacturers of electric power cables and manufacturers of wind turbines. As a result, many of our current and planned revenue-generating projects involve business collaborators on whose performance our revenue is dependent. If these business collaborators fail to deliver their products or perform their obligations on a timely basis or fail to generate sufficient demand for the systems they manufacture, our revenue from the project may be delayed or decreased, and we may not be successful in selling our products.
Problems with product quality or product performance may cause us to incur warranty expenses or product liability charges and may damage our market reputation and prevent us from achieving increased sales and market share.
Consistent with customary practice in our industry, we provide various warranties or guarantees relating to our products, such as that our products and/or services will be free from defects in material and workmanship under normal use and service. We generally provide a one- to three-year warranty on our products, commencing upon installation. A provision is recorded upon revenue recognition to cost of revenues for estimated warranty expense based on historical experience. The possibility of future product failures or issues related to services we provided could cause us to incur substantial expenses to repair or replace defective products or re-perform such services potentially in excess of our reserves. Furthermore, widespread product failures or other shortcomings of our products may damage our market reputation, reduce our market share, create product liability obligations or cause sales to decline.
Many of our customers outside of the United States may be either directly or indirectly related to governmental entities, and we could be adversely affected by violations of the United States Foreign Corrupt Practices Act and similar worldwide anti-bribery laws outside the United States.
The U.S. Foreign Corrupt Practices Act and similar worldwide anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business. Many of our customers outside of the United States are, either directly or indirectly, related to governmental entities and are therefore subject to such anti-bribery laws. Our policies mandate compliance with these anti-bribery laws. We operate in many parts of the world that have experienced governmental corruption to some degree, and in certain circumstances strict compliance with anti-bribery laws may conflict with local customs and practices. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees or agents. Violations of these laws, or allegations of such , could our business and result in a material effect on our business, results of operations and financial condition.
We have had limited success marketing and selling our superconductor products and system-level solutions, including our REG system, and our failure to more broadly market and sell our products and solutions could lower our revenue and cash flow .
To date, we have had limited success marketing and selling our superconductor products and system-level solutions and there has been no widespread commercial use of the REG system. Once our products and solutions are ready for widespread commercial use, we will have to develop a marketing and sales organization that will effectively demonstrate the advantages of our products over more traditional products, competing superconductor products and other technologies. We may not be successful in our efforts to market this technology and we may not be able to establish an effective sales and distribution organization.
We may decide to enter into arrangements with third parties for the marketing or distribution of our products, including arrangements in which our products, such as Amperium wire, are included as a component of a larger product, such as a power cable system. By entering into marketing and sales alliances, the financial benefits to us of commercializing our products will be dependent on the efforts of others.
Even if a project is funded, completion of projects can be delayed as a result of other factors. It is possible that the market demands we currently anticipate for our products and solutions will not develop and that they will never achieve widespread commercial acceptance. In such event, we would not be able to implement our strategy, and our results of operations could be adversely affected. Even if a commercial market were to develop, commercial terms requested by third parties, such as relating to bonding requirements, limitations of liability, warranty periods, or other contractual provisions, may not be acceptable to us, which could impede our ability to enter into contractual arrangements for the sale of our products and systems.
We or third parties on whom we depend may be adversely affected by natural disasters, including events resulting from climate change, and our business continuity and disaster recovery plans may not adequately protect us or our value chain from such events .
Natural disasters (including, but not limited to tornadoes, earthquakes, fires, storms, floods, droughts and extreme temperatures) and chronic changes in the physical environment, such as changes to meteorological or hydrological patterns, could severely disrupt our operations and have a material adverse effect on our business, results of operations, financial condition and prospects. Climate change may increase the frequency or intensity of such events, as well as contribute to chronic changes (such as changes in meteorological or hydrological patterns) that may result in similar risk. If a natural disaster, power outage, or other event, including human acts such as terrorism, occurred that prevented us from fully utilizing our value chain or facilities, that damaged critical infrastructure, such as the manufacturing facilities on which we rely, or that otherwise disrupted operations, it may be difficult or, in certain cases, for us to continue our business for a substantial period of time. The recovery and business continuity plans we have in place may prove in the event of a or similar event. We may incur substantial expenses as a result of the limited nature of our recovery and business continuity plans, which could have a material effect on our business.
In addition, changes in climate change-related laws or regulations, including laws relating to greenhouse gas emissions, could lead to new or additional compliance requirements and expenditures, and subject us to additional operational costs and restrictions, including increased energy and raw material costs and other compliance requirements which could negatively impact our reputation, business, capital expenditures, results of operations and financial position. For more information, please refer to our risk factor titled “Evolving and varied expectations on environmental sustainability and social initiatives could adversely impact our financial results."
Uncertainty surrounding our prospects and financial condition may have an adverse effect on our customer and supplier relationships.
Our relationships with our customers and suppliers are predicated on the belief that we will continue to operate. Our customers, particularly in the utility industry, are generally risk averse and may not enter into sales contracts with us if there is uncertainty regarding our ability to support working capital needs of large-scale projects.
Pandemics, epidemics, or other public health crises may adversely impact our business, financial condition and results of operations .
The occurrence or reoccurrence of regional epidemics, a global pandemic or other public health crises may adversely affect our operations, financial condition, and results of operations. The extent to which a public health crisis impacts our business going forward will depend on factors such as the duration and scope; governmental, business, and individuals' actions in response to the public health crisis; and the impact on economic activity, including the possibility of recession or financial market instability. Measures to contain a public health crisis may intensify other risks described in these Risk Factors.
Risks Related to Our Financial Performance
Changes in valuation allowance of deferred tax assets may affect our future operating results.
We are required to periodically review our deferred tax assets and determine whether, based on available evidence, a valuation allowance is necessary. In fiscal 2025, based on our evaluation of all available positive and negative evidence, we concluded that it was more-likely-than not that a significant portion of our federal and state deferred tax assets would be realized. Accordingly, we released the valuation allowance against these deferred tax assets. The assessment of the realizability of future tax assets involved considerable management judgement and required evaluation of all available evidence, including cumulative recent financial performance and forecasts of future taxable income. As a result of this assessment, we recognized a deferred income tax benefit of $118.4 million in fiscal 2025. Our judgement regarding the likelihood of realization of these deferred tax assets could change in future periods, which could result in a material impact to our income tax provision expense and our results of operations in the period in which the valuation allowance is adjusted.
If we fail to maintain proper and effective internal control over financial reporting, our ability to produce accurate and timely financial statements could be impaired and may lead investors and other users to lose confidence in our financial data.
Maintaining effective internal control over financial reporting is necessary for us to produce reliable financial statements. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the financial statements will not be prevented or detected on a timely basis.
During the fourth quarter of fiscal 2025, in connection with the preparation of our financial statements for this Annual Report on Form 10-K, management identified the following material weakness: We did not maintain effective internal controls over preparation and review of the initial purchase accounting and the continuing fair value accounting associated with the Comtrafo Acquisition to ensure the accurate and timely reporting of our financial results related to this acquisition. Specifically, errors went undetected in amounts initially recorded to the opening balance sheet due to controls not operating at the appropriate level of precision during management's review process which could have led to a reasonable possibility of material misstatement to account balances or disclosures.
Notwithstanding the material weakness, we believe that our financial statements contained in this Annual Report on Form 10-K fairly present our financial position, results of operations and cash flows for the periods covered by this report in all material respects.
Our management, with the oversight of our audit committee, has initiated steps and plans to take additional measures to remediate the underlying causes of the material weakness, which we currently believe will be primarily through the development and implementation of new levels of precision of management review controls around business acquisitions.
If we are unable to maintain effective internal controls, we may not have adequate, accurate or timely financial information, and we may be unable to meet our reporting obligations or comply with the requirements of the SEC or the Sarbanes-Oxley Act of 2002, which could result in the imposition of sanctions, including the inability of registered broker dealers to make a market in our common stock, or an investigation by regulatory authorities. Any such action or other negative results caused by our inability to meet our reporting requirements or to comply with legal and regulatory requirements or by our disclosure of an accounting, reporting or control issue could adversely affect the trading price of our securities and our business. Significant deficiencies or material weaknesses in our internal control over financial reporting could also reduce our ability to obtain financing or could increase the cost of any financing we obtain.
We have not been historically profitable, and there can be no assurance that we will sustain our recent profitability. Our operating results may fluctuate significantly from quarter to quarter and may fall below expectations in any particular fiscal quarter.
While we achieved profitable results in fiscal 2025 and 2024, our ability to sustain profitability depends on numerous factors, many of which are outside of our control. If we are unable to maintain profitability, we could be required to take charges, including the potential restoration of some or all of the valuation allowance against our deferred tax assets, which could materially affect our financial condition and results of operations.
There remains uncertainty in our business, which makes it difficult to evaluate our business and future prospects. In addition, our operating results historically have been difficult to predict and have at times fluctuated from quarter to quarter due to a variety of factors, many of which are outside of our control. As a result of all of these factors, comparing our operating results on a period-to-period basis may not be meaningful, and you should not rely on our past results as an indication of our future performance. In addition, we have in the past provided, and may continue to, provide public guidance on our expected operating and financial results for future periods. Such guidance is comprised of forward-looking statements subject to the risks and uncertainties described in this Annual Report on Form 10-K and in our other public filings and statements. Our actual results may not always be in line with or exceed the guidance we have provided. If our revenue or operating results fall below the expectations of investors or any securities analysts that follow our company in any period or we do not meet our guidance, the trading price of our common stock would likely decline.
Our operating expenses do not always vary directly with revenue and may be difficult to adjust in the short term. As a result, if revenue for a particular quarter is below our expectations, we may not be able to proportionately reduce operating expenses for that quarter, and therefore such a revenue shortfall would have a disproportionate effect on our operating results for that quarter.
While we generated positive operating cash flow in fiscal 2025 and the prior year, we have a history of negative operating cash flows, and we may require additional financing in the future, which may not be available to us.
At March 31, 2026, we had approximately $ 147.6 million of cash, cash equivalents and restricted cash, and during the fiscal year ended March 31, 2026, $ 23.1 million in cash was provided by our operating activities. In the current period, we experienced net income and positive operating cash flows. In prior years, we have experienced net losses and negative operating cash flows.
Our liquidity is highly dependent on our ability to profitably grow our revenues, control our operating costs, and secure additional financing, if required. We may require additional capital to conduct our business and adequately respond to future business challenges or opportunities, including, but not limited to, the need to develop new products or enhance existing products, maintain or expand research and development projects, collateralize performance bonds or letters of credit, acquire new businesses or assets, and the need to build inventory or to invest other cash to support business growth. In order to raise additional capital, we may offer shares of our common stock or other securities convertible into or exchangeable for our common stock. To the extent that we raise additional capital through the sale of equity or convertible debt securities, the ownership interest of each of our existing stockholders will be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect the rights of our common stockholders.
In the event that additional liquidity is required, there can be no assurance that such financing would be available or, if available, that such financing could be obtained upon terms acceptable to us, which would have a material adverse effect on our business, financial condition and prospects.
In addition, the Company maintains the majority of its cash and cash equivalents in accounts with major U.S. and multi-national financial institutions, and our deposits at certain institutions exceed insured limits. Market conditions can impact the viability of these institutions. In the event of failure of any of the financial institutions where we maintain our cash and cash equivalents, there can be no assurance that we will be able to access uninsured funds in a timely manner or at all.
Changes in exchange rates could adversely affect our results of operations.
Currency exchange rate fluctuations could have an adverse effect on our revenues and results of operations, and we could experience losses with respect to hedging activities. In fiscal 2025, 52% of our revenues were recognized from sales outside of the United States. In addition, approximately 16% and 7% of our revenues in fiscal 2025 were derived under sales contracts where prices were denominated in the Euro and Real, respectively. Unfavorable currency fluctuations could require us to increase prices to foreign customers, which could result in a lesser value of orders, and therefore lower revenues, from such customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, our results of operations could be adversely affected. In addition, most sales made by our foreign subsidiaries are denominated in the currency of the country in which these products are sold, and the currency they receive in payment for such sales could be less valuable at the time of receipt as a result of exchange rate fluctuations. However, we cannot be certain that our efforts will be adequate to protect us against significant currency fluctuations or that such efforts will not us to additional exchange rate risks.
We may be required to issue performance bonds, which restricts our ability to access any cash used as collateral for the bonds.
While we have been required to provide performance bonds in the form of surety bonds or other forms of security and letters of credit in the past, the size of the bonds and letters of credit was not material. In recent years, we have entered into contracts that require us to post bonds and deliver letters of credit of significant magnitude. Similarly, in many other instances, we have been required to deposit cash in escrow accounts as collateral for these instruments, which is unavailable to us for general use for significant periods of time. Should we be unable to obtain performance bonds or letters in the future, significant future potential revenue could become unavailable to us. Further, should our working capital situation deteriorate, we would not be able to access the restricted cash to meet working capital requirements.
Risks Related to Our Markets
Adverse changes in domestic and global economic conditions could adversely affect our operating results.
We have become increasingly subject to the risks arising from adverse changes in domestic and global economic conditions, including as a result of governmental policies and actions in the United States. In recent years, financial markets have been volatile and the state of both the domestic and global economies has been uncertain. Governmental policies and actions in the United States, such as new tariffs, trade restrictions and resulting trade conflicts, cuts in government spending or the failure to increase the federal debt ceiling, could lead to further financial market volatility and harm the economy. Adverse credit conditions in the future could have a negative impact on our ability to execute on future strategic activities. In addition, if credit is difficult to obtain in the future, some customers may delay or reduce purchases. Similarly, inflationary pressures have increased and may increase our costs or force us to increase prices for our products. These economic events have resulted or could in the future result in higher product costs, reductions in sales of our products, longer sales cycles, adoption of new technologies, increased accounts receivable and inventory write-offs and increased price competition. If conditions exist and continue for an extended period of time, our business and results of operations may be materially affected. We also purchase large amounts of commodity-based raw materials. Prevailing prices for such commodities are subject to fluctuations due to changes in supply and demand, tariffs, and a variety of additional factors beyond our control, such as global political and economic conditions. Any of these events would likely our business, results of operations and financial condition.
The ongoing conflict between the United States, Israel, and Iran has disrupted global energy markets and supply chains and could adversely affect our business, financial condition, and results of operations
In February 2026, the United States and Israel launched coordinated military strikes against Iran, which retaliated with missile attacks across the region. Although we do not have material operations in the Middle East, the ongoing conflict and any further escalation has and could continue to lead to significant disruption of global energy supplies and increases in global energy prices, which could affect demand for our Grid and Wind products and solutions in multiple ways. Higher energy prices and energy market volatility may alter utility and industrial customer spending patterns and priorities, potentially accelerating investment in grid infrastructure and resilience in certain markets while constraining capital budgets in others. The conflict could also increase the cost or reduce the availability of commodity-based raw materials we depend on, including stainless steel, nickel, and copper, and disrupt global supply chains on which we and our suppliers rely. In addition, further escalation could heighten inflationary pressures on our input costs, adversely affect global financial markets, increase currency exchange rate volatility, including with respect to Brazilian Real and the Euro, in which a significant portion of our revenues and costs are denominated, and elevate interest rates, which could increase the cost of future debt financing and affect our ability to execute our acquisition-driven growth strategy on terms. The could also affect U.S. defense spending priorities and appropriations, which could or impact funding for our ship protection systems and other defense-related programs with the U.S. Navy. Finally, increased geopolitical in the Middle East could affect our ability to pursue business in the region, including in countries where we have existing or prospective customer relationships. While the impacts of the between the United States, Israel, and Iran may have an effect on our business, financial condition, and results of operations, we are to predict the extent or nature of these impacts at this time.
Our international operations are subject to risks that we do not face in the United States, which could have an adverse effect on our operating results.
In recent years, a substantial amount of our consolidated revenues were recognized from customers outside of the United States. For example, 52% of our revenues in fiscal 2025 and 31% of our revenues in fiscal 2024 were recognized from sales outside the United States. We also manufacture certain of our products and purchase a portion of our raw materials and components from suppliers in other foreign countries. The ongoing wars between Ukraine and Russia and the Middle East have caused increased raw material costs and material shortages and, as a result, adversely impacted certain of our suppliers. Our international operations are subject to a variety of risks that we do not face in the United States, including:
potentially longer payment cycles for sales in foreign countries and difficulties in collecting accounts receivable;
difficulties in staffing and managing our foreign offices and the increased travel, infrastructure and legal compliance costs associated with multiple international locations;
additional withholding taxes or other taxes on our foreign income and repatriated cash, and tariffs or other restrictions on foreign trade or investment, including export duties and quotas, trade and employment restrictions;
imposition of, or unexpected adverse changes in, foreign laws or regulatory requirements;
increased exposure to foreign currency exchange rate risk;
reduced protection for intellectual property rights in some countries; and
natural disasters, pandemics, political unrest, war or acts of terrorism.
Trade tensions between the U.S. and China, the U.S. and Russia, as well as those between the U.S. and Canada, Mexico and other countries have been escalating in recent years. Increased tariffs, sanctions, and other trade restrictions, as well as the existing and potential further responses from countries subject to such tariffs, sanctions, and other trade restrictions, could adversely affect the global economy and financial markets and could adversely affect our business, financial condition and results of operations.
We cannot predict with certainty the effect that new quotas, tariffs, taxes or other trade barriers upon the importation or exportation of our products or gauge the effect that new barriers would have on our financial position or results of operations. These new tariffs or any additional tariffs or other trade barriers may cause our costs to increase, our products to be less competitive, and our business, results of operations and financial position to be materially adversely affected. Moreover, in February 2026, the United States Supreme Court ruled that the use of the International Emergency Economic Powers Act ("IEEPA") to impose tariffs was not permitted, invalidating a significant portion of U.S. tariffs that had been in effect since April 2025. The Administration responded by invoking a 10% global tariff pursuant to section 122 of the Trade Act of 1974 for 150 days, effective February 24, 2026. The Administration also initiated trade investigations that could result in additional future tariffs. The ruling, and the Administration's subsequent actions, have created substantial uncertainty regarding the tariff environment, including with respect to (i) the timing and scope of any new tariffs that may be imposed under alternative mechanisms and (ii) the potential for further legal to any such tariffs.
Our overall success in international markets depends, in part, upon our ability to succeed in differing legal, regulatory, economic, social and political conditions. We may not be successful in developing and implementing policies and strategies that will be effective in managing these risks in each country where we do business or conduct operations. Our failure to manage these risks successfully could harm our international operations and reduce our international sales, thus lowering our total revenue and increasing losses.
Our products face competition, which could limit our ability to acquire or retain customers.
The markets for our products are competitive and many of our competitors have substantially greater financial resources and research and development, manufacturing and marketing capabilities than we do. In addition, as our target markets develop, other large industrial companies may enter these fields and compete with us.
We face competition across our product lines from companies like ABB, Hitachi, Ingeteam, Mitsubishi and Siemens. We face more local competition in a subset of our business like power quality by companies that include, Southern States, Controllix, Powerside, Elgin Power, Scott Manufacturing and QVARx. Additionally, we face competition on our power transformers and power supplies from companies like Friem, Dynapower, Nidec, Espey Manufacturing, Hammond, WEG S.A., and Kraft Powercon.
With our HTS-based REG product, we are offering a new approach that provides alternatives to utilities for power system design. Therefore, we believe that we compete with traditional approaches such as new full-sized substations, overhead and underground transmission, and urban power transformers.
We believe we are currently the only company that can offer HTS-based SPS products that have been fully qualified for use aboard U.S. Navy surface combatants. Therefore, the primary competition for our SPS products is currently coming from defense contractors that provide the copper-based systems that our lighter, more efficient HTS versions have been developed to replace. Companies such as Ultra Maritime, L3 Harris, and Raytheon have the bulk of the copper-based business today.
As the HTS systems markets develop, other large industrial companies may enter those fields and compete with us. If we are unable to compete successfully, it may harm our business, which in turn may limit our ability to acquire or retain customers.
With respect to our Wind business, other companies that serve the wind turbine components industry include ABB. We also face indirect competition in the wind energy market from global manufacturers of wind turbines, such as Siemens, Vestas, and Suzlon. We face competition for the supply of wind turbine engineering design services from design engineering firms such as Aerovide and W2E.
The competition in these markets could adversely affect our operating results by reducing the volume of the products we sell or the prices we can charge. These competitors may be able to respond more rapidly than us to new or emerging technologies or changes in customer requirements. They may also devote greater resources to the development, promotion and sale of their products than we do. Our success depends significantly upon our ability to enhance our products and technologies and to develop and introduce, on a timely and cost-effective basis, new products and features that meet changing customer requirements and incorporate technological enhancements, which may include artificial intelligence, machine learning, and other advanced digital technologies that are increasingly central to product development, manufacturing efficiency, and customer engagement. If we are unable to develop new products and enhance functionalities or technologies to adapt to these changes, our business will suffer. We can provide no assurance that we will continue to effectively compete our current competitors or additional companies that may enter our markets.
We have operations in, and depend on sales in, emerging markets, including Latin America and India, and global conditions could negatively affect our operating results or limit our ability to expand our operations outside of these markets. Changes in Brazil's or India’s political, social, regulatory and economic environment may affect our financial performance.
We have operations in emerging markets, including Brazil and India. Our financial performance depends upon our ability to carry on our operations and sell our products in such emerging markets. We are, and will continue to be, subject to financial, political, economic and business risks in connection with our operations and sales in these emerging markets. In addition to the business risks inherent in developing and servicing these markets, economic conditions may be more volatile, legal and regulatory systems less developed and predictable, and the possibility of various types of adverse governmental action more pronounced in emerging markets. In addition, inflation, fluctuations in currency and interest rates, competitive factors, civil unrest, public health emergencies and labor problems could affect our revenues, expenses and results of operations. Our operations could also be adversely affected by acts of war, terrorism or the threat of any of these events as well as government actions such as controls on imports, exports and prices, tariffs, new forms of taxation, or changes in fiscal regimes and increased government regulation in the countries in which we operate or service customers. Unexpected or events or circumstances in any of these markets could have a material effect on our financial results and cash flows.
Our financial performance could be affected by the political and social environment in Brazil and India. In recent years, India has experienced civil unrest and terrorism and has been involved in conflicts with neighboring countries. The potential for hostilities between India and Pakistan has been high in light of tensions related to recent terrorist incidents in India and the unsettled nature of the regional geopolitical environment.
With respect to our activities in all emerging markets, we may be impacted by issues with managing foreign sales operations, including long payment cycles, potential difficulties in accounts receivable collection and, especially from significant customers, fluctuations in the timing and amount of orders. The adverse effect of any of these issues on our business could be increased due to the concentration of our business with a small number of customers. Operations in foreign countries also expose us to risks relating to difficulties in enforcing our proprietary rights, currency fluctuations and adverse or deteriorating economic conditions. For example, the ongoing war between Ukraine and Russia has caused increased raw material costs and material shortages for, and adversely impacted, certain of our suppliers. If we experience problems with obtaining registrations, compliance with foreign country or applicable U.S. laws, or if we experience difficulties in payments or intellectual property matters in foreign jurisdictions, or if significant political, economic or regulatory changes occur, our results of operations would be affected.
Industry consolidation could result in more powerful competitors and fewer customers.
Competitors in the industries in which we operate are consolidating. If our competitors consolidate, they likely will increase their market share, gain economies of scale that enhance their ability to compete with us and/or acquire additional products and technologies that could displace our product offerings. Our customer base also is undergoing consolidation. Consolidation within our customers’ industries could affect our customers and their relationships with us. If one of our competitors’ customers acquires any of our customers, we may lose that business. Additionally, if our customers become larger and more concentrated, they could exert pricing pressure on all suppliers, including us. If we were to lose market share or customers or face pricing pressure due to consolidation of our customers, our results of operations and financial condition could be adversely affected.
Evolving and varied expectations on environmental sustainability and social initiatives could adversely impact our business and financial results .
There has been evolving and varied expectations by investors, customers, environmental activists, the media and governmental and nongovernmental organizations on climate, human capital, and other environmental, social and similar sustainability matters. If we are not effective in addressing environmental, social and other sustainability matters affecting our business, including any relevant sustainability goals, our reputation and financial results may suffer. While we may at times engage in voluntary initiatives (such as voluntary disclosures, certifications, or goals, among others) to improve our environmental, social, and governance ("ESG") profile or respond to certain stakeholder expectations, such initiatives may be costly and may not have the desired effect. For example, methodologies and data relevant to many ESG matters are evolving, in some cases quite rapidly; as a result, actions or statements that we may take based on information or processes we currently believe to be reasonable may subsequently be determined to be erroneous or not in keeping with current or future best practice. Moreover, we may not be able to successfully complete such initiatives due to factors that are within or outside of our control. Even if this is not the case, we cannot guarantee that our approaches or results will align with the expectations of any particular stakeholder. Stakeholder expectations are not uniform, and both advocates and opponents to certain ESG matters are increasingly resorting to a range of activism forms, including media campaigns and , to advance their perspectives.
There are also evolving regulatory requirements related to various ESG matters. For example, various jurisdictions have adopted, or are considering adopting, requirements for the disclosure of climate- or other ESG-related information, or certain substantive considerations regarding ESG in operations, which may require significant additional costs to comply. As with other stakeholder expectations, such regulations are divergent and, at times, conflict, which may increase the costs and complexity of compliance and any associated risks. Any failure to successfully navigate regulatory developments and other stakeholder expectations may result in additional costs, difficulties in attracting or retaining customers or employees, reputational harm, regulatory or investor engagement, or other adverse impacts. Additionally, many of our customers and suppliers may be subject to similar expectations, which may augment or create additional risks, including risks that may not be known to us.
Growth of the wind energy market depends largely on the availability and size of government subsidies, economic incentives and legislative programs designed to support the growth of wind energy.
At present, the cost of wind energy exceeds the cost of conventional power generation in many locations around the world. Various governments have used different policy initiatives to encourage or accelerate the development and adoption of wind energy and other renewable energy sources. Renewable energy policies are in place in the European Union, certain countries in Asia, including India, China, Japan and South Korea, and many of the states in Australia and the United States. Examples of government sponsored financial incentives include capital cost rebates, feed-in tariffs, tax credits, net metering and other incentives to end-users, distributors, system integrators and manufacturers of wind energy products to promote the use of wind energy and to reduce dependency on other forms of energy. Governments, however, may decide to reduce or eliminate these economic incentives, or curtail legislative programs supportive of wind energy technologies for political, financial or other reasons. In the United States, various legislation and regulations designed to support the growth of wind energy had been implemented or proposed, such as the Inflation Reduction Act, Production Tax Credit for Renewable Energy ("PTC") and the Clean Power Plan. However, actions by the current U.S. administration, including the One Big Beautiful Bill Act of 2025 (the "OBBBA"), have significantly curtailed those programs and tax credits in the U.S. and generally made it more difficult to develop and construct wind energy products. Any reductions in, or eliminations of, government subsidies, economic incentives or legislative programs before the wind energy industry reaches a sufficient scale to be cost- in a non-subsidized marketplace could reduce demand for our products and affect our business prospects and results of operations.
Lower prices for other energy sources may reduce the demand for wind energy development, which could have a material adverse effect on our ability to grow our Wind business.
The wind energy market is affected by the price and availability of other energy sources, including nuclear, coal, natural gas and oil, as well as other sources of renewable energy. To the extent renewable energy, particularly wind energy, becomes less cost-competitive due to reduced government targets, increases in the cost of wind energy, new regulations, incentives that favor other energy sources, cheaper alternatives or otherwise, demand for wind energy and other forms of renewable energy could decrease. Slow growth or a long-term reduction in the demand for renewable energy could have a material adverse effect on our ability to grow our Wind business.
Risks Related to Our Technologies
Our technology and products could infringe intellectual property rights of others, which may require costly litigation and, if we are not successful, could cause us to pay substantial damages and disrupt our business.
In recent years, there has been significant litigation involving patents and other intellectual property rights in many technology-related industries. There may be patents or patent applications in the United States or other countries that are pertinent to our products or business of which we are not aware. The technology that we incorporate into and use to develop and manufacture our current and future products, including the technologies we license, may be subject to claims that they infringe the patents or proprietary rights of others. The success of our business will also depend on our ability to develop new technologies without infringing or misappropriating the proprietary rights of others. Third parties may allege that we infringe patents, trademarks or copyrights, or that we misappropriated trade secrets. These allegations could result in significant costs and diversion of the attention of management. If a claim were brought us and we are found to a third party’s intellectual property rights, we could be required to pay substantial , including treble if it is determined that we have such rights, or be from using the technology deemed to be , or using, making or selling products deemed to be . If we have supplied products or technology to third parties, we may be obligated to indemnify these third parties for they may be required to pay to the patent holder and for any they may sustain as a result of the . In addition, we may need to attempt to license the intellectual property right from such third party or spend time and money to design around or avoid the intellectual property. Any such license may not be available on reasonable terms, or at all. An determination may subject us to significant liabilities and/or our business.
We may be unable to adequately prevent disclosure of trade secrets and other proprietary information.
We rely on trade secrets to protect the majority of our proprietary technologies, especially where we do not believe patent protection is appropriate or obtainable. However, trade secrets are difficult to protect. We rely, in part, on confidentiality agreements with our employees, contractors, consultants, outside scientific collaborators and other advisors to protect our trade secrets and other proprietary information. These agreements may not effectively prevent disclosure of confidential information and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. In addition, others may independently discover our trade secrets or independently develop processes or products that are similar or identical to our trade secrets and courts outside the United States may be less willing to protect trade secrets. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position.
Our patents may not provide meaningful or long-term protection for our technology, which could result in us losing some or all of our market position.
We own or have licensing rights under many patents and pending patent applications. However, the patents that we own or license may not provide us with meaningful or long-term protection of our technologies and may not prevent our competitors from using similar technologies for a variety of reasons, such as:
the patent applications that we or our licensors file may not result in patents being issued;
our existing patents may expire;
any patents issued may be challenged by third parties; and
others may independently develop similar technologies not protected by our patents or design around the patented aspects of any technologies we develop.
In particular, if any material patents expire, we may not be able to prevent competitors from producing products similar to ours, possibly at lower prices, which could adversely impact our business, results of operations, and financial condition.
Moreover we could incur substantial litigation costs in defending the validity of or enforcing our own patents. We also rely on trade secrets and proprietary know-how to protect our intellectual property. However, our confidentiality agreements and other safeguards may not provide meaningful protection for our trade secrets and other proprietary information. If the patents that we own or license or our trade secrets and proprietary know-how fail to protect our technologies, our market position may be adversely affected.
Third parties have or may acquire patents that cover the materials, processes and technologies we use or may use in the future to manufacture our Amperium products, and our success depends on our ability to license such patents or other proprietary rights.
We expect that some or all of the HTS materials, processes and technologies we use in designing and manufacturing our products are or will become covered by patents issued to other parties, including our competitors. The owners of these patents may refuse to grant licenses to us, or may be willing to do so only on terms that we find commercially unreasonable. If we are unable to obtain these licenses, we may have to contest the validity or scope of those patents or re-engineer our products to avoid infringement claims by the owners of these patents. It is possible that we will not be successful in contesting the validity or scope of a patent, or that we will not prevail in a patent infringement claim brought against us. Even if we are successful in such a proceeding, we could incur substantial costs and diversion of management resources in prosecuting or such a proceeding.
There are a number of technological challenges that must be successfully addressed before our superconductor products can gain widespread commercial acceptance, and our inability to address such technological challenges could adversely affect our ability to acquire customers for our products.
Many of our superconductor products are in the early stages of commercialization, while others are still under development. There are a number of technological challenges that we must successfully address to complete our development and commercialization efforts for superconductor products. We will also need to improve the performance and reduce the cost of our Amperium wire to expand the number of commercial applications for it. We may be unable to meet such technological challenges or to sufficiently improve the performance and reduce the costs of our Amperium wire. Delays in development, as a result of technological challenges or other factors, may result in the introduction or commercial acceptance of our superconductor products later than anticipated.
Risks Related to Our Common Stock
Our common stock has experienced, and may continue to experience, market price and volume fluctuations, which may prevent our stockholders from selling our common stock at a profit and could lead to costly litigation against us that could divert our management’s attention.
The market price of our common stock has historically experienced volatility and may continue to experience such volatility in the future. Factors such as our financial performance, liquidity requirements, technological achievements by us and our competitors, the establishment of development or strategic relationships with other companies, strategic acquisitions, new customer orders and contracts, and our introduction of commercial products have had and may in the future have a significant effect on the market price of our common stock. The stock market in general, and the stock of high technology companies, in particular, have, in recent years, experienced extreme price and volume fluctuations, which are often unrelated to the performance or condition of particular companies. Such broad market fluctuations have and could continue to adversely affect the market price of our common stock. Due to these factors, the price of our common stock may decline, and investors may be unable to resell their shares of our common stock for a profit. Following periods of volatility in the market price of a particular company’s securities, securities class action litigation has often been brought that company. In the past, we have been subject to a number of class action lawsuits which were filed us on behalf of certain purchasers of our common stock. If we become subject to additional of this kind in the future, it could result in additional costs, a award us and the further of our management’s attention.
General Risk Factors
Unfavorable results of legal proceedings could have a material adverse effect on our business, operating results and financial condition.
From time to time, we may become subject to legal proceedings and claims that arise in or outside the ordinary course of business. Results of legal proceedings cannot be predicted with certainty. Our insurance coverage may be insufficient, our assets may be insufficient to cover any amounts that exceed our insurance coverage, and we may have to pay damage awards or otherwise may enter into settlement arrangements in connection with such claims. Any such payments or settlement arrangements in legal proceedings could have a material adverse effect on our business, operating results or financial condition. Regardless of merit, legal proceedings could result in substantial costs and significantly and adversely impact our reputation and divert management’s attention and resources, which could have a material adverse effect on our business, operating results or financial condition. In addition, such lawsuits may make it more difficult to finance our operations.
Item 1B.
UNRESOLVED STAFF COMMENTS
Not applicable.
Item 1C.
CYBERSECURITY
Overview
Our IT Systems and Confidential Information may be subject to cybersecurity threats. Our business, like others within the energy technologies industry, is faced with growing cybersecurity threats as we increasingly rely on digital technologies across our business, some of which are managed by third -party service providers on whom we rely to help us collect, host or process information.
We recognize the significance of these threats, sometimes referred to as hacking, cybersecurity fraud, and cyberattacks, and maintain processes and procedures designed to protect our IT Systems and Confidential Information from unauthorized access. However, there can be no assurance that a cyber-attack would timely be detected or thwarted. To date, we are not aware of any material cybersecurity incidents that have materially affected or are reasonably likely to materially affect us, and we have not incurred significant operating expenses related to cybersecurity incidents. For more information on risks related to cybersecurity, please see the section titled “Risk Factors” included under Item 1A of this Annual Report on Form 10-K.
Risk Management and Strategy
Our cybersecurity risk management program includes operational, technical and physical controls designed to protect against and respond timely to cybersecurity threats. To address evolving cybersecurity risks and corresponding regulations, our policies and procedures are benchmarked to industry, regulatory and cybersecurity frameworks (including the National Institute of Standards and Technology). This does not imply that we meet any particular technical standards, specifications, or requirements, only that we may use industry, regulatory, and cybersecurity frameworks as a guide to help us identify, assess, and manage cybersecurity risks relevant to our business.
Our cybersecurity risk management program is integrated into our overall risk management program, and shares common methodologies, reporting channels and governance processes that apply across the risk management program to other legal, compliance, strategic, operational, and financial risk areas.
Management has engaged third -party vendors to assist in monitoring our cybersecurity risk management programs and identifying and responding to any incidents. Additionally, third -party vendors are routinely engaged to evaluate how effectively management as a whole manages cybersecurity risk. This includes annual testing of our incident response plan through tabletop exercises and simulations to ensure readiness as well as penetration testing and security assessments. We also utilize third -party cybersecurity vendors to assess our protections against identified vulnerabilities, and we have implemented a third -party risk management process for key service providers, based on our assessment of their criticality to our operations.
We have developed cybersecurity training for employees concerning cybersecurity risk. This training provides information on security awareness and phishing simulations. All employees are required to attend periodic cybersecurity training. On a regular basis, our IT team shares news and articles related to cybersecurity awareness with all employees.
Our cybersecurity risk assessment is performed annually and includes external and internal penetration testing performed by third party vendors to test for vulnerabilities in the Company’s environment.
We have not identified risks from known cybersecurity threats, including as a result of any prior cybersecurity incidents, that have materially affected us, including our operations, business strategy, results of operations, or financial condition. We face risks from cybersecurity threats that, if realized, are reasonably likely to materially affect us, including our operations, business strategy, results of operations, or financial condition. See "Risk Factors – Our business and operations may be materially adversely impacted in the event of a failure or security breach of our or any critical third parties' IT Systems or Confidential Information."
Governance
The Board of Directors has delegated the oversight of risks from cybersecurity threats to the Audit Committee, which has delegated authority to the Chief Financial Officer to oversee the Company’s day-to-day cybersecurity risk management, including prevention, detection and responding to cybersecurity incidents.
The Audit Committee is updated at least annually by the CFO on the status of cybersecurity matters. Contemporaneous reporting is provided where deemed necessary to the Audit Committee and to the full Board of Directors on significant cyber events including response, legal obligations, and outreach and notification to regulators and third parties.
The Director, Global Information Technology and Financial Systems (the “IT Director”), works closely with our Director, IT Operations, Security and Compliance, who serves as our Chief Information Security Officer (the "CISO") and leads an internal team that works directly with our third-party vendors to manage our cybersecurity risk management program and activities. The internal team monitors our information systems for cybersecurity threats, reviews cybersecurity incidents, analyzes emerging threats, and develops and implements risk mitigation strategies. The CISO has over 25 years of progressive experience in information technology in both publicly traded and private companies. Under our CFO’s authority, the IT Director periodically reports on the cybersecurity program to our executive leadership team, including by providing the team with updates on cybersecurity threats and incidents, the status of ongoing projects and initiatives, performance metrics, and additional cybersecurity topics. On an annual basis, both the IT Director and the CISO review the results of the current state of cybersecurity risk management, including the results of our cybersecurity risk assessment and any action plan to address any identified vulnerabilities.
Item 2.
PROPERTIES
Our corporate headquarters and Grid manufacturing operations are located in a leased 88,000-square-foot facility in Ayer, Massachusetts. Additionally, we have Grid manufacturing operations located in a leased 77,500 square-foot facility in Westminster, Massachusetts, a leased 43,000 square-foot facility in Silesian, Poland, and a leased 125,000 square-foot facility in Cornélio Procópio, Paraná, Brazil, as well as an owned 40,000 square-foot facility in Queensbury, New York, an owned 150,000 square-foot facility in Bordentown, New Jersey, an owned 80,000 square-foot facility in New Milford, Connecticut, an owned 20,000 square-foot facility in Florence, New Jersey, and an owned 632,100 square-foot facility in Cornélio Procópio, Paraná, Brazil.
We also occupy leased facilities located in Australia, Austria, India, Wisconsin, Washington, and the United Kingdom with a combined total of approximately 72,000 square feet of space. These leases have varying expiration dates throug h October 2030 w hich can generally be terminated at our request after a six-month advance notice. These locations focus primarily on research and development, sales and/or field service and do not have significant leases or physical presence. We believe all of these facilities are well-maintained and suitable for their intended uses.
The following table summarizes information regarding our significant properties, as of March 31, 2026:
Location
Supporting
Square footage
Owned/Leased
United States
Ayer, Massachusetts
Corporate & Grid Segment
Leased
Bordentown, New Jersey
Grid Segment
Owned
New Milford, Connecticut
Grid Segment
Owned
Queensbury, New York
Grid Segment
Owned
Florence, New Jersey
Grid Segment
Owned
Westminster, Massachusetts
Grid Segment
Leased
Poland
Bielsko-Biala, Silesian
Grid Segment
Leased
Brazil
Cornélio Procópio, Paraná
Grid Segment
Owned
Cornélio Procópio, Paraná
Grid Segment
Leased
Item 3.
LEGAL PROCEEDINGS
We are not party to any material legal proceedings.
Item 4.
MINE SAFETY DISCLOSURES
Not Applicable.
PART II
Item 5.
MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information
Our common stock has been listed on the Nasdaq Global Select Market under the symbol “AMSC” since 1991.
Holders
The number of holders of record of our common stock on May 22, 2026 was 190 .
Dividend Policy
We have never paid cash dividends on our common stock. We currently intend to retain earnings, if any, to fund the development and growth of our business and do not anticipate paying cash dividends for the foreseeable future. Payment of future cash dividends, if any, will be at the discretion of our board of directors after taking into account various factors, including our financial condition, operating results, current and anticipated cash needs and plans for expansion.
Stock Performance Graph
The following graph compares the cumulative total stockholder return on our common stock from March 31, 2021 to March 31, 2026 with the cumulative total return of (i) the Nasdaq Composite Index and (ii) the Nasdaq Electrical Components & Equipment Index.
This graph assumes the investment of $100.00 on March 31, 2021 in our common stock, the Nasdaq Composite Index and the Nasdaq Electrical Components & Equipment Index, and assumes any dividends are reinvested. Measurement points are March 31, 2021; March 31, 2022; March 31, 2023; March 31, 2024; March 31, 2025; and March 31, 2026.
COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN
Among American Superconductor Corporation,
the Nasdaq Composite Index and the Nasdaq Electrical Components & Equipment Index
Fiscal year ended March 31,
Company/Index
American Superconductor Corporation
Nasdaq Composite Index
Nasdaq Electrical Components & Equipment Index
Item 6.
RESERVED
Item 7.
MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Executive Overview
Guided by a belief in the power of next, we are a leading provider of power control solutions that apply innovation and creativity to address today’s challenges and enable a more resilient and sustainable energy future. Driven by our purpose “to power progress,” we integrate future-facing technologies to balance the growing global demand for power with the need for reliable, and efficient power delivery. Our advanced grid systems, engineering services, power electronics, software controls, and superconductor-based solutions help the traditional and renewable energy sectors, electric utilities, the materials and mining sector, industrial facilities, and other critical infrastructure operators optimize network reliability, improve power quality, alleviate grid constraints, and scale operations without added complexity or size.
We also deliver ship protection and power management solutions that enhance fleet efficiency, survivability, and operational readiness for the U.S. Navy and allied fleets. In the wind power market, we provide advanced electrical control systems, engineering, and support services that help manufacturers lower the cost of wind energy and improve turbine performance. Beyond these markets, we provide industrial process, environmental and emission control capabilities that support operational efficiency across the broader energy infrastructure. Across our businesses, our solutions are helping optimize power networks, strengthen naval capabilities, and support gigawatts of renewable energy generation worldwide as governments and industries continue investing in more resilient, secure, and sustainable power systems.
We operate our business under two market-facing business segments: Grid and Wind. We believe this market centric structure enables us to more effectively anticipate and meet the needs of power generators, power utilities, industrial manufacturers, the military and renewable energy companies.
Grid. Our Grid business segment enables electric utilities, industrial facilities, and traditional and renewable energy project developers to connect, transmit, transform and distribute power with exceptional efficiency, reliability, security and affordability. We provide transmission planning services that allow us to identify power grid congestion, poor power quality, and other risks, which help us determine how our solutions can improve network performance. These services often lead to sales of our grid interconnection solutions for wind farms and solar power plants, power quality systems and transmission and distribution cable systems. We also sell critical shipyard infrastructure power solutions, ship power supplies and ship protection products to U.S. and allied Navies through our Grid business segment.
Wind. Our Wind business segment enables manufacturers to field wind turbines with exceptional power output, reliability and affordability. We supply advanced power electronics and control systems, license our highly engineered wind turbine designs, and provide extensive customer support services to wind turbine manufacturers. Our design portfolio includes a broad range of drivetrains and power ratings of 2 megawatts ("MWs") and higher. We provide a broad range of power electronics and software-based control systems that are highly integrated and designed for optimized performance, efficiency, and grid compatibility.
Our fiscal year begins on April 1 and ends on March 31. When we refer to a particular fiscal year, we are referring to the fiscal year that began on April 1 of that same year. For example, fiscal 2025 refers to the fiscal year that began on April 1, 2025. Other fiscal years follow similarly.
Changes in macroeconomic conditions arising from various reasons, such as the ongoing wars between Russia and Ukraine, and in the Middle East, tariffs, trade restrictions and resulting trade conflicts, labor force availability, sourcing, material delays and global supply chain disruptions could have a material adverse effect on our business, financial condition and results of operations.
On December 5, 2025 (the "Comtrafo Acquisition Date"), we entered into a Stock Exchange Agreement (the "Stock Exchange Agreement") with the selling stockholders named therein. Pursuant to the terms of the Stock Exchange Agreement, Mardin Participações Ltda., an entity incorporated in Brazil (“AMSC Brazil”) and our wholly-owned subsidiary, directly or indirectly, purchased all of the issued and outstanding shares of Comtrafo Indústria de Transformadores Elétricos S.A. ("Comtrafo") (the "Comtrafo Acquisition") for (a) (i) 300.0 million Brazilian Real in cash; and (b) 2,417,142 restricted shares of our common stock, $0.01 par value per share (the "AMSC Shares") that were paid and issued, respectively, at closing. In addition, pursuant to certain additional real property agreements, AMSC Brazil through Comtrafo purchased certain real estate assets and transportation assets of Comtrafo for 155.6 million Brazilian Real and 13.4 million Brazilian Real, respectively, in cash. Additionally, AMSC Brazil has agreed to pay the selling stockholders up to an additional 382.5 million Brazilian Real in cash (the "Earnout") upon the achievement of specified earnings before interest, taxes, depreciation, and amortization ("EBITDA") objectives during the three years following the closing. On May 15, 2026, pursuant to the terms of the Stock Exchange Agreement, Comtrafo purchased a certain real estate asset from the selling stockholders that Comtrafo was leasing and using for administrative and manufacturing operations for 37.2 million Brazilian Real in cash. Comtrafo is a Brazil-based manufacturer of large power and distribution transformers primarily for utility customers and also for industrial customers.
On August 1, 2024, we entered into a Stock Purchase Agreement (the “Stock Purchase Agreement”) with the selling stockholders named therein. Pursuant to the terms of the Stock Purchase Agreement and concurrently with entering into such agreement, we acquired all of the issued and outstanding shares of Megatran, Industries, Inc. ("Megatran"), for aggregate consideration in an amount equal to $61.4 million, as may be adjusted pursuant to the Stock Purchase Agreement (the “Purchase Price”), including a cash payment after closing of $5.0 million, as adjusted pursuant to Sections 5.6(c), (d), and (f) of the Stock Purchase Agreement (the “Additional Cash Purchase Price”). At closing, we paid to Megatran's selling stockholders $25.0 million in cash on hand, and 1,297,600 restricted shares of our common stock. On September 23, 2024, we paid the Additional Cash Purchase Price to the selling stockholders, which was calculated based on the agreed upon formula set forth in the Stock Purchase Agreement, in the amount of $8.3 million which includes the Additional Cash Purchase Price and the make whole payment. Megatran's wholly-owned subsidiary, NWL, Inc. (together with Megatran, "NWL"), is a U.S.-based global provider of engineered power conversion solutions for demanding industrial and military applications. As a result of this transaction, Megatran became a wholly-owned subsidiary and is operated by our Grid business segment. We refer to this transaction as the "acquisition of NWL".
Results of Operations
A discussion regarding our financial condition and results of operations for the year ended March 31, 2026 compared to the year ended March 31, 2025 is presented below. A discussion regarding our financial condition and results of operations for year ended March 31, 2025 compared to March 31, 2024 is included under "Management's Discussion and Analysis of Financial Condition and Results of Operations" in our Annual Report on Form 10-K for the year ended March 31, 2025 filed with the SEC on May 21, 2025.
Fiscal Years Ended March 31, 2026 and March 31, 2025
Revenues
Total revenues increased by 34% to $299.2 million in fiscal 2025 from $222.8 million in fiscal 2024. Our revenues are summarized as follows (in thousands):
Fiscal Years Ended March 31,
Revenues:
Grid
Wind
Total
Revenues in our Grid business segment are derived from our D-VAR product sales, Northeast Power Systems, Inc. ("NEPSI") product sales, Neeltran, Inc. ("Neeltran") product sales, NWL product sales, Comtrafo product sales, HTS wire sales, ship protection systems ("SPS"), government-sponsored electric utility projects and other prototype development contracts. We also engineer, install and commission our products on a turnkey-basis for some customers. The Grid business segment accounted for 84% of total revenues in both fiscal 2025 and 2024. Grid revenues increased 34% to $251.3 million in fiscal 2025 from $187.2 million in fiscal 2024. The increase in revenues was driven by higher new energy power systems revenues, higher ship protection systems revenues, and the contribution from the acquisition of Comtrafo in fiscal 2025.
Revenues in our Wind business segment are derived from wind turbine electrical control systems and core components, wind turbine license and development contracts, service contracts and consulting arrangements. Our Wind business segment accounted for 16% of total revenues in both fiscal 2025 and 2024. Revenues in the Wind business segment increased 34% to $47.8 million in fiscal 2025 from $35.6 million in fiscal 2024. The increase over the prior year period was driven by additional shipments of electrical control systems ("ECS") in fiscal 2025.
Cost of Revenues and Gross Margin
Cost of revenues increased by 29% to $207.8 million in fiscal 2025 , compared to $161.0 million in fiscal 2024. Gross margin increased to 31% in fis cal 2025 from 28% in fiscal 2024. Cost of revenues include total amortization expense of $0.6 million in the fiscal year ended March 31, 2026 as a result of Comtrafo acquired backlog intangible assets. In addition, $0.8 million related to a fair value adjustment for the step-up basis assigned to acquired inventory to properly reflect the fair value in purchase accounting was charged to cost of revenues in the fiscal year ended March 31, 2026. The increase in gross margin in fiscal 2025 was due to higher revenues and a beneficial product mix in the Grid and Wind business segments.
Operating Expenses
Research and development
Research and development (“R&D”) expenses increased by 38% to $15.7 million, or 5% of revenue in fiscal 2025 , compared to $11.4 million, or 5% of revenue, in fiscal 2024. The increase in R&D expenses is primarily a result of additional compensation and stock compensation expenses in fiscal 2025.
Selling, general, and administrative
Selling, general and administrative (“SG&A”) expenses increased by 34% to $57.6 million, or 19% of rev enue in fiscal 2025 from $43.1 million, or 19% of revenue, in fiscal 2024. The increase in SG&A expenses is primarily a result of the addition of Comtrafo operating expenses and additional compensation and stock compensation expenses in fiscal 2025.
Amortization of acquisition related intangibles
We recorded $2.4 million in fiscal 2025 and $1.7 million in fiscal 2024 in amortization expense related to our core technology and know-how, customer relationships, and other intangible assets. The increase in amortization expense is primarily a result of additional amortization related to the Comtrafo acquisition.
Change in fair value of contingent consideration
The change in fair value of our contingent consideration for the earnout payment on the acquisition of Comtrafo resulted in a loss of $ 4.2 million from an increase in fair value of the contingent consideration in fiscal 2025.
The change in fair value of our contingent consideration for the earnout payment on the acquisition of NEPSI resulted in a loss of $3.4 million resulting from an increase in fair value in fiscal 2024. During fiscal 2024, we issued 300,000 shares of our common stock to the selling stockholders following certification of the achievement of specified earnout revenue objectives. We also recorded a $3.3 million payment relating to the acquisition of NWL, as a payment to settle the remaining obligations after the acquisition.
Operating income (loss)
Our operating income (loss) is summarized as fo llows (in thousands):
Fiscal Years Ended March 31,
Operating income (loss):
Grid
Wind
Unallocated corporate expenses
Total
Our Grid business segment generated operating income o f $8.5 million in fiscal 2025 and $1.8 million in fiscal 2024. The improvement in the Grid business segment operating income was due to higher revenues and improved gross margins in fiscal 2025.
The Wind segment generated operating income of $7.1 m illion in fiscal 2025 and $3.8 million in fiscal 2024. The increase in the Wind business segment operating income was due to higher revenues and improved gross margins in fiscal 2025.
Unallocated corporate expenses consisted of a loss on contingent consideration of $4.2 million in fiscal 2025 and $6.7 million in fiscal 2024 .
Interest income, net
Interest income, net was $6.4 million in fiscal 2025 compared to $3.7 million for fiscal 2024. The increase in interest income, net, was primarily due to higher cash balances generating additional interest income in fiscal 2025.
Other expense, net
Oth er expense, ne t was $1.1 million in fiscal 2025, compared to $0.3 million in fiscal 2024. The increase in other expense, net was driven by unfavorable fluctuations in foreign exchange rates, resulting in translation losses.
Income Taxes
We recorded an income tax benefit of $117.1 million in fiscal 2025, compared to $3.7 million in fiscal 2024. The net impact to income tax is primarily a result of a non-cash tax benefit from the release of the majority of our valuation allowance against deferred tax assets due to a change in facts and circumstances that impact our conclusion on realizability of such assets.
Net income
Net income was $133.8 million in fiscal 2025, compared to $6.0 million in fiscal 2024. The improvement in net income was driven primarily by the non-cash tax benefit from the release of the majority of our valuation allowance against deferred tax assets, higher revenues and improved gross margins in fiscal 2025.
Please refer to the “Risk Factors” section in Part I, Item 1A, for a discussion of certain factors that may affect our future results of operations and financial condition.
Non-GAAP Financial Measure - Non-GAAP Net Income and Non-GAAP Net Income Per Share
Generally, a non-GAAP financial measure is a numerical measure of a company’s performance, financial position or cash flow that either excludes or includes amounts that are not normally excluded or included in the most directly comparable measure calculated and presented in accordance with generally accepted accounting principles in the United States (“GAAP”). The non-GAAP measures included in this Form 10-K, however, should be considered in addition to, and not as a substitute for or superior to the comparable measure prepared in accordance with GAAP.
We define non-GAAP net income as net income (loss) before stock-based compensation, amortization of acquisition-related intangibles, change in fair value of contingent consideration, acquisition costs, and other non-cash or unusual charges. We believe non-GAAP net income assists management and investors in comparing our performance across reporting periods on a consistent basis by excluding these non-cash charges and other items that we do not believe are indicative of our core operating performance. In addition, we use non-GAAP net income as a factor to evaluate the effectiveness of our business strategies. A reconciliation of GAAP net income to non-GAAP net income (loss) is set forth in the table below (in thousands, except per share data):
Year ended March 31,
Net income (loss)
Stock-based compensation
Amortization of acquisition-related intangibles
Change in fair value of contingent consideration
Acquisition costs
Non-GAAP net income
Non-GAAP net income per share - basic
Non-GAAP net income per share - diluted
Weighted average shares outstanding - basic
Weighted average shares outstanding - diluted
Non-GAAP net income was $158.1 million, or $3.68 per s hare, for fiscal 2025, compared to $24.0 million, or $0.65 per share, for fiscal 2024 and $0.6 million, or $0.02 per share, for fiscal 2023. The improvement in non-GAAP net income in fiscal 2025 compared to fiscal 2024 was due primarily to the non-cash tax benefit from the release of the majority of our valuation allowance against deferred income tax assets, and improved operating margin in the Wind and Grid business segments.
Liquidity and Capital Resources
The Company’s primary sources of liquidity are internally generated cash provided by operating activities, our cash and cash equivalents on hand, along with access to capital markets. The Company believes that these sources of liquidity provide adequate liquidity to meet both its short-term and reasonably foreseeable long-term requirements and obligations. At March 31, 2026, we had cash, cash equivalents and restricted cash of $147.6 million, compared to $85.4 million at March 31, 2025, an increase of $62.2 million. As of March 31, 2026, we had approximately $17.8 million in cash, cash equivalents and restricted cash in foreign bank accounts. Our cash, cash equivalents and restricted cash are summarized as follows (in thousands):
March 31, 2026
March 31, 2025
Cash and cash equivalents
Restricted cash
Total cash, cash equivalents and restricted cash
Net cash provided by operating activities was $23.1 m illion, $28.3 million and $2.1 million in fiscal 2025, 2024, and 2023, respectively. The decrease in net cash provided by operations in fiscal 2025 compared to fiscal 2024 was due primarily to changes in deferred revenue and accounts receivable, offset by changes in accounts payable and accrued expenses, deferred income taxes, changes in fair value of contingent consideration and stock-based compensation expense. The increase in net cash provided by operations in fiscal 2024 compared to fiscal 2023 was driven primarily by higher gross margins, favorable changes in accounts payable and accrued expenses, relief of deferred revenues, increased non-cash expenses like stock compensation, depreciation and amortization, and change in fair value of contingent consideration, offset by decreased cash collections, increased prepaid balances, and change in deferred income taxes.
Net cash used in investing activities was $77.1 million, $35.2 million, and $1.0 million in fiscal 2025, 2024, and 2023, respectively. The increase in net cash used in investing activities in fiscal 2025 compared to fiscal 2024 was primarily due to cash paid for the Comtrafo acquisition in the current fiscal year. The increase in net cash used in investing activities in fiscal 2024 compared to fiscal 2023 was due primarily to cash paid for the acquisition of NWL.
Net cash provided by financing activities was $116.1 million compared to less than $0.1 million and $65.4 million in fiscal 2025, 2024, and 2023, respectively. The increase in cash provided by financing activities in fiscal 2025 compared to fiscal 2024 was primarily related to net proceeds received from an equity offering in June 2025. The decrease in cash provided by financing activities in fiscal 2024 compared to fiscal 2023 was primarily related to net proceeds received from an equity offering in fiscal 2023, while the company had no equity offerings in fiscal 2024.
At March 31, 2026, we had $3.3 million of restricted cash included in long-term assets and $3.5 million of restricted cash in current assets. At March 31, 2025, we had $4.3 million of restricted cash included in long-term assets and $1.6 million of restricted cash in current assets. These amounts included in restricted cash primarily represent collateral deposits to secure surety bonds and letters of credit for various customer contracts. These deposits are held in interest bearing accounts.
On the Comtrafo Acquisition Date, we entered into the Stock Exchange Agreement with the selling stockholders. Pursuant to the terms of the Stock Exchange Agreement, AMSC Brazil, directly or indirectly, purchased all of the issued and outstanding shares of Comtrafo for (a) (i) 300.0 million Brazilian Real in cash; and (b) AMSC Shares that were paid and issued, respectively, at closing. In addition, pursuant to certain additional real property agreements, AMSC Brazil through Comtrafo purchased certain real estate assets and transportation assets of Comtrafo for 155.6 million Brazilian Real and 13.4 million Brazilian Real, respectively, in cash. Additionally, AMSC Brazil has agreed to pay the Stockholders the Earnout upon the achievement of specified EBITDA objectives during the three years following the closing. Comtrafo is a Brazil-based manufacturer of large power and distribution transformers primarily for utility customers and also for industrial customers.
In June 2025, we completed an offering of 4,743,750 shares of our common stock at a public offering price of $28.00 per share under our Registration Statement on Form S-3. We received aggregate net proceeds of approximately $124.6 million after deducting underwriting discounts and commissions and offering expenses.
On August 1, 2024, we entered into the Stock Purchase Agreement with the selling stockholders named therein. Pursuant to the terms of the Stock Purchase Agreement and concurrently with entering into such agreement, we acquired all of the issued and outstanding shares of Megatran, for the purchase price of $61.4 million, which consideration amount was subject to various adjustments set forth in the Stock Purchase Agreement (including those described below) and consisted of: (a) (i) $25.0 million, minus (ii) the Indebtedness (as defined in the Stock Purchase Agreement) outstanding as of immediately prior to the closing, minus (iii) Company Expenses (as defined in the Stock Purchase Agreement); (b) a number of restricted shares (rounded up or down to the nearest whole share, as applicable) of our common stock equal to the quotient obtained by dividing (x) $31.4 million by (y) the closing price per share of our common stock on the Nasdaq Global Select Market on the last trading day immediately preceding the Acquisition Date; and (c) an additional cash payment equal to $5.0 million, as adjusted pursuant to Sections 5.6(c), (d), and (f) of the Stock Purchase Agreement. Megatran is now a wholly-owned subsidiary of the Company and, together with its wholly-owned subsidiaries and affiliates, is operated and reported as a component of its Grid business segment. On September 23, 2024, the Company paid $3.3 million to the selling stockholders, which was calculated based on the agreed upon formula set forth in the Stock Purchase Agreement. As of March 31, 2025, there are no remaining obligations to the selling stockholders of Megatran.
In January 2024, we filed a shelf registration statement on Form S-3 that will expire three years from the date on which it was declared effective, March 15, 2027 (the “Form S-3”). The Form S-3 allows us to offer and sell from time-to-time up to $250 million of common stock, debt securities, warrants or units comprised of any combination of these securities. The Form S-3 is intended to provide us flexibility to conduct registered sales of our securities, subject to market conditions, in order to fund our future capital needs. The terms of any future offering under the Form S-3 will be established at the time of such offering and will be described in a prospectus supplement filed with the SEC prior to the completion of any such offering.
In August 2024, the Company filed an automatically-effective shelf registration statement on Form S-3 that will expire no later than August 12, 2027 (the “Second Form S-3”). The Second Form S-3 allows the Company to offer and sell from time-to-time unspecified amounts of common stock, debt securities, warrants or units comprised of any combination of these securities and allows certain selling stockholders to offer and sell from time-to-time common stock. The Second Form S-3 assisted the Megatran selling stockholders in the resale of their common stock and register the Comtrafo selling stockholder's AMSC shares, and is intended to provide the Company flexibility to conduct registered sales of its securities, subject to market conditions, in order to fund its future capital needs. The terms of any future offering under the Second Form S-3 will be established at the time of such offering and will be described in a prospectus supplement filed with the SEC prior to the completion of any such offering.
We are a party to many contractual obligations involving commitments to make payments to third parties. These obligations impact our short-term and long-term liquidity and capital resource needs. Certain contractual obligations are reflected on the consolidated balance sheet as of March 31, 2026, while others are considered future commitments. We have various contractual arrangements, under which we have committed to purchase certain minimum quantities of goods or services on an annual basis. For information regarding our other contractual obligations, refer to Note 13, "Contingent Consideration," Note 16, "Leases", and Note 18, "Commitments and Contingencies" to our consolidated financial statements included elsewhere in this Annual Report on Form 10-K.
We believe we have sufficient available liquidity to fund our operations and capital expenditures for at least the next twelve months. We may seek to raise additional capital, which could be in the form of loans, convertible debt or equity, to fund our operating requirements and capital expenditures. There can be no assurance that we will be able to raise additional capital on favorable terms or at all or execute on any other means of improving our liquidity as described above. Additionally, the impact of global sources of instability, including tariffs, trade restrictions and resulting trade conflicts, the ongoing wars between Russia and Ukraine and in the Middle East, instability of financial institutions and political instability in the United States, on the global financial markets may reduce our ability to raise additional capital, if necessary, which could negatively impact our liquidity. In addition, the current interest rate environment may affect the cost and availability of debt financing for future acquisitions or other capital needs. While we funded our recent acquisitions primarily with cash on hand and equity, we may seek to use debt financing for future transactions, and higher interest rates could increase the cost of such financing or make certain transactions less .
Legal Proceedings
From time to time, we are involved in legal and administrative proceedings and claims of various types. We record a liability in our consolidated financial statements for these matters when a loss is known or considered probable and the amount can be reasonably estimated. We review these estimates each accounting period as additional information is known and adjust the loss provision when appropriate. If a matter is both probable to result in liability and the amounts of loss can be reasonably estimated, we estimate and disclose the possible loss or range of loss to the extent necessary to make the consolidated financial statements not misleading. If the loss is not probable or cannot be reasonably estimated, a liability is not recorded in our consolidated financial statements.
Recent Accounting Pronouncements
In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures . The amendments in ASU 2023-09 address investor requests for more transparency about income tax information through improvements to income tax disclosures primarily related to the rate reconciliation and income taxes paid information. Following the release of ASU 2023-09 in December 2023, the effective date will be annual reporting periods beginning after December 15, 2024. As of March 31, 2026, we have adopted ASU 2023-09, made the required disclosures, and noted no other material impact on our consolidated financial statements.
In March 2024, the FASB issued ASU 2024-02, Codification Improvements—Amendments to Remove References to the Concepts Statements . The amendments in ASU 2024-02 contain amendments to the Codification that remove references to various FASB Concepts Statements. Following the release of ASU 2024-02 in March 2024, the effective date will be annual reporting periods beginning after December 15, 2024. As of March 31, 2026, we have adopted ASU 2024-02 and noted no other material impact on our consolidated financial statements.
In November 2024, the FASB issued ASU 2024-03, Income Statement — Reporting Comprehensive Income — Expense Disaggregation Disclosures . The amendments in ASU 2024-03 address investor requests for more disclosure of disaggregated financial reporting information about expenses presented in the income statement. Following the release of ASU 2024-03 in November 2024, the effective date will be annual reporting periods beginning after December 15, 2026. We are evaluating the impact on our consolidated financial statements.
In July 2025, the FASB issued ASU 2025-05, Financial Instruments —Credit Losses . The amendments in ASU 2025-05 contain updates to how entities are permitted to estimate expected credit losses for accounts receivable and contract assets. Following the release of ASU 2025-05 in July 2024, the effective date will be annual reporting periods beginning after December 15, 2025. As of April 1, 2025, we early adopted ASU 2025-05 and noted no material impact on our consolidated financial statements.
In November 2025, the FASB issued ASU 2025-08, Financial Instruments — Credit Losses: Purchased Loans. The amendments in ASU 2025-08 requires that loans acquired without credit deterioration and deemed “seasoned” will be considered purchased seasoned loans and accounted for using the gross-up approach at acquisition. Following the release of ASU 2025-08 in November 2025, the effective date will be annual reporting periods beginning after December 15, 2026. As of April 1, 2025, we early adopted ASU 2025-08 and noted no material impact on our consolidated financial statements.
We do not believe that, outside of those disclosed here, there are any other recently issued accounting pronouncements that will have a material impact on our consolidated financial statem ents.
Critical Accounting Policies and Estimates
The preparation of the consolidated financial statements requires that we make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base our estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ under different assumptions or conditions. Our accounting policies that involve the most significant judgments and estimates are as follows:
Revenue recognition
For certain arrangements, such as contracts to perform research and development, prototype development contracts and certain customized product sales, we record revenues using the over-time method, measured by the relationship of costs incurred to total estimated contract costs. Over-time revenue recognition accounting is predominantly used on certain turnkey power systems installations for electric utilities and long-term prototype development contracts with the U.S. government.
Significant judgement is required to estimate the total expected costs for projects that typically have a timeline of 12-24 months. Any increase or decrease in estimated costs to complete a performance obligation without a corresponding change to the contract price could impact the calculation of cumulative revenue to date and gross profit on the project. Factors that may result in a change to our estimate include delays in manufacturing, unforeseen engineering problems, the performance of subcontractors and material suppliers, among others.
We have a long history of working with multiple types of projects and preparing cost estimates, and we rely on the expertise of key personnel to prepare what we believe are reasonable best estimates given available facts and circumstances. Due to the nature of the work involved, however, judgment is involved to estimate the total costs to complete, and the amounts estimated could have a material impact on the revenue we recognize in each accounting period. We cannot estimate unforeseen events and circumstances which may result in actual results being materially different from previous estimates.
See Note 4, “Revenue Recognition,” for additional information.
Business Acquisitions
We account for acquisitions using the purchase method of accounting in accordance with Accounting Standards Codification ("ASC") 805, Business Combinations . The purchase price for each acquisition is allocated to the assets acquired and liabilities assumed based on their estimated fair values at the date of acquisition. The excess purchase price over the estimated fair value of the net assets acquired and liabilities assumed is recorded as goodwill. Intangible assets, if identified, are also recorded.
Determining the fair value of certain assets and liabilities assumed is judgmental in nature and often involves the use of significant estimates and assumptions as well as the use of specialists as needed. The Company utilizes management estimates and an independent third-party valuation firm to assist in determining the fair values of assets acquired, including intangible assets and liabilities assumed. The primary intangible assets acquired include customer relationship. Intangible assets are initially valued using a methodology commensurate with the intended use of the asset. The fair value of customer relationships is measured using the multi-period excess earnings method (“MPEEM”). The basis for future sales projections for both the MPEEM and RFR are based on internal revenue forecasts which the Company believes represents reasonable market participant assumptions. The future cash flows are discounted using an applicable discount rate. The key uncertainties in the calculations, as applicable, are assumptions used in developing estimates of future cash flows, including revenue growth and expense forecasts, assumed customer attrition rates, as well as perceived risks associated with those forecasts in determining the discount rate. There is inherent uncertainty in forecasted cash flows and therefore, actual results may differ and could result in a subsequent impairment charge of acquired intangibles and/or goodwill.
The consideration for our acquisitions may include future payments that are contingent upon the occurrence of a particular event. We record a contingent consideration obligation for such contingent consideration payments at fair value on the acquisition date. We estimate the fair value of contingent consideration obligations through valuation models that incorporate probability adjusted assumptions related to the achievement of the milestones, the likelihood of making related payments, the EBITDA volatility, and the discount rate. Significant judgment is employed in determining these assumptions as of the acquisition date and for each subsequent period. Accordingly, future business and economic conditions, as well as changes in any of the assumptions described above, can materially impact the fair value of contingent consideration recorded at each reporting period.
Goodwill
Goodwill represents the excess of cost over net assets of acquired businesses that are consolidated. We perform our annual assessment of goodwill on February 28th of each fiscal year and whenever events or changes in circumstances or a triggering event indicate that the carrying amount may not be recoverable. Circumstances that could trigger an impairment test include, but are not limited to, a significant adverse change in the business climate or legal factors, an adverse action or assessment by a regulator, or unanticipated competition. The Company may first assess qualitative factors to determine whether it is necessary to perform the quantitative goodwill impairment test, or the Company can bypass the qualitative assessment and proceed directly to the quantitative test. The quantitative goodwill impairment test requires the Company to estimate and compare the fair value of the reporting unit with its carrying value. We determine the fair value of a reporting unit, using a methodology which combines an income approach, using a discounted cash flow method, with a market approach. The income approach includes estimates and assumptions about revenue growth rates, EBITDA and discount rates, discounted by an estimated weighted-average cost of capital derived from other publicly traded companies that are similar but not identical from an operational and economic standpoint. These estimates are based on historical experiences, our projects of future operating activity and our weighted-average cost of capital. A significant change in events, circumstances or any of these assumptions could affect these estimates, which could result in an .
We performed our annual assessment of goodwill on February 28, 2026 including a quantitative assessment of our goodwill balance acquired from our acquisition of Neeltran, and a qualitative assessment of all other reporting units goodwill, and determined that there was no impairment to goodwill. See Note 5, “Goodwill,” for further information regarding our goodwill valuation assumptions.
Income taxes
Our provision for income taxes is comprised of a current and a deferred portion. The current income tax provision is calculated as the estimated taxes payable or refundable on tax returns for the current fiscal year. The deferred income tax provision is calculated for the estimated future tax effects attributable to temporary differences and carryforwards using expected tax rates in effect in the years during which the differences are expected to reverse. All deferred tax assets and liabilities are presented as non-current in the consolidated balance sheets.
We regularly assess our ability to realize our deferred tax assets. Assessments of the realization of deferred tax assets require that management consider all available evidence, both positive and negative, and make significant judgments about many factors, including the amount and likelihood of future taxable income. As of March 31, 2026, the Company recorded a $118.4 million non-cash income tax benefit related to the release of a substantial portion of its valuation allowance against deferred tax assets. This was based on the Company's evaluation of the positive evidence, including cumulative income position over the three year period ended March 31, 2026, revenue growth, current profitability, expectations regarding future forecasted income, and negative evidence, including uncertainty in economic and political environments from industry competition and dependence on government contracts. This release of the valuation allowance resulted in the recognition of a deferred tax asset and a corresponding increase to income tax benefit in fiscal 2025, the effect of which is an increase in reported net income.
Accounting for income taxes requires a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if, based on the technical merits, it is more likely than not that the position will be sustained upon audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. We reevaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Any changes in these factors could result in the recognition of a tax benefit or an additional charge to the tax provision. See Note 14, “Income Taxes,” of our consolidated financial statements for further information regarding our income tax assumptions and expenses.
