Item 1A. Risk Factors.
RISK FACTORS
You should carefully consider the risks and uncertainties described below, together with the other information in this Annual Report, including our financial statements and the related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” before making an investment in our securities. We cannot assure you that any of the events discussed in the risk factors below will not occur. These risks could have a material and adverse impact on our business, results of operations, financial condition and growth prospects. If that were to happen, the trading price of our securities could decline. Additional risks and uncertainties not presently known to us or that we currently deem immaterial also may impair our business operations or financial condition. In this section, we first provide a summary of the principal risks and uncertainties we face and then provide a full set of risk factors and discuss them in greater detail.
Risks Related to Our Business and Our Industry
We have not fully completed our planned corporate reorganization
In connection with the Business Combination, we had anticipated completing a corporate reorganization in which, among other changes, Motekforce Link BV and its subsidiaries and Hocoma AG were to become wholly owned subsidiaries of DIH Holding US, Inc. The parties were unable to complete this corporate reorganization prior to the Business Combination and, as previously disclosed, the parties opted to close the Business Combination and waive the condition to close that this reorganization be completed. These entities are owned by DIH Technology, Inc., our largest stockholder.
The products produced by Motek remain a key part of our product line and we operate with Motek pursuant to the terms o f an exclusive co ntract which obligates Motek to provide these products to us. While we do not believe this arrangement currently has a material adverse effect on our results of operations, there can be no assurance that Motek will not begin to sell its products to our competitors which would have an adverse impact on us.
There can be no assurance that the complete reorganization will be completed
We have concluded that there is substantial doubt about the Company’s ability to continue as a going concern for one year from the date of this annual report.
As of March 31, 2025, the Company had $1.9 million of cash and cash equivalents. The Company’s net losses began in 2020 and continued through the year ended March 31, 2025. The Company’s historical operating losses resulted in an accumulated deficit of $43.9 million as of March 31, 2025. For the year ended March 31, 2024, results reflected elevated costs associated with becoming a publicly traded company and establishing public company processes and controls. For the year ended March 31, 2025, the Company reported negative cash flows from operating activities and operating results affected by liquidity constraints and tariff- and import-related factors that delayed customer order confirmations and product deliveries, together with ongoing compliance costs. These liquidity issues have continued in While the Company has issued additional convertible debt to assist with its liquidity issues, there can be no assurance that these liquidity constraints will not continue.
We are substantially dependent on the commercial success of our current key product lines
Our success is substantially dependent on our ability to continue to generate and grow revenue from the sales of our current key product lines, LokoMat, Erigo, Armeo, C-Mill and CAREN/Grail, which represent approximately 90% of our revenue. Our success will depend on many factors including, but not limited to, our ability to:
develop and execute our sales and marketing strategies and maintain and manage the necessary sales, marketing and other capabilities and infrastructure that are required to successfully commercialize our products;
achieve, maintain and grow market acceptance of, and demand for our current products;
establish or demonstrate in the medical community the safety and efficacy of our rehabilitation products and their potential advantages over in comparison to, existing competing products and devices and products currently in development;
offer our products at competitive prices as compared to alternative options, and our ability to achieve a suitable profit margin from the sales of our products;
comply with applicable legal and regulatory requirements, including medical device compliance;
maintain our distribution and supply arrangements with third parties; and
enforce our intellectual property rights related to current and future products, if any.
If we do not achieve one or more of these factors, many of which are beyond our control, in a timely manner or at all, we may not be able to continue to generate and grow revenue from the sales of our current products, which may materially impact the success of our business.
We rely on sales from certain key products and markets, any disruptions to those products or markets due to change of market environment, regulatory requirements, or personal and sales practices, could generate adverse effects to our sales and business performance.
One of our key product lines, LokoMat accounts for more than 45% of our revenue; our other key products, Erigo, Armeo, C-Mill and CAREN/Grail collectively account for 55% of our revenues. In addition, approximately 80% of our revenue is concentrated in Europe, Middle East and Africa (“ EMEA ”) and Americas, with the remaining portion in Asia Pacific (“ APAC ”). Any disruptions to those key products and/or markets due to changes in market conditions, regulatory requirements, or personal and sales practices, could generate adverse effects to our sales and business performance.
Global, regional, and local economic weakness and uncertainty could adversely affect our demand for our products and services and our business and financial performance.
Our business and financial performance depends on worldwide economic conditions and the demand for our products and services in the markets in which we compete. Ongoing economic weakness, including an economic slowdown or recession, uncertainty in markets throughout the world and other adverse economic conditions, including inflation, changes in monetary policy and increased interest rates, may result in decreased demand for our products and services and increased expenses and difficulty in managing inventory levels and accurately forecasting revenue, gross margin, cash flows and expenses.
Prolonged or more severe economic weakness and uncertainty could also cause our expenses to vary materially from our expectations. Any financial turmoil affecting the banking system and financial markets or any significant financial services institution failures could negatively impact our treasury operations, as the financial condition of such parties may deteriorate rapidly and without notice.
War, geopolitical factors, and foreign exchange fluctuations could adverse effect the performance of our business.
Due to our significant presence in Europe, and emerging needs from South East Asia and the Middle East, war or geopolitical instability in those regions could adversely affect demand and supply chain disruptions from those regions; and foreign exchange, especially the Euro’s depreciation versus the US dollar would adversely depress our US dollar-denominated revenue and profitability We believe that an increasing percentage of our future revenue will come from international sales as we continue to expand our operations and develop opportunities in additional territories. International sales are subject to a number of additional risks, including:
difficulties in staffing and managing our foreign operations;
difficulties in penetrating markets in which our competitors’ products are more established;
reduced protection for intellectual property rights in some countries;
export restrictions, trade regulations and foreign tax laws;
fluctuating foreign currency exchange rates;
obtaining and maintaining foreign certification and compliance with other regulatory requirements;
customs clearance and shipping delays; and
political and economic instability.
If one or more of these risks were realized, we could be required to dedicate significant resources to remedy the situation, and if we are unsuccessful at finding a solution, our revenue may decline.
Geopolitical risks associated with the ongoing conflict in Israel and Palestine could result in increased market volatility and uncertainty, which could negatively impact our business, financial condition, and results of operations.
The uncertain nature, scope, magnitude, and duration of hostilities stemming from recent events in Israel and Palestine have disrupted global markets and contributed to increased market volatility and uncertainty, which could have an adverse impact on macroeconomic and other factors that affect our business and supply chain. Any disruption in our supply chain could reduce our revenue and adversely impact our financial results. Such a disruption could occur as a result of any number of events, including, but not limited to, military conflicts, geopolitical developments, war or terrorism, including the ongoing conflict in Israel and Palestine, regional or global pandemics, and disruptions in utility and other services. Any inability to obtain adequate deliveries or any other circumstance that would require us to seek alternative sources of supply or to manufacture, assemble, and test such components internally could significantly delay our ability to ship our products, which could relationships with current and prospective customers and could our reputation and brand and could affect our business, financial condition, and results of operations.
We may not have sufficient funds to meet certain future operating needs or capital requirements, which could impair our efforts to develop and commercialize existing and new products, and as a result, we may in the future consider one or more capital-raising transactions, including future equity or debt financings, strategic transactions, or borrowings which may also dilute our shareholders.
We may need to raise additional capital to fund our growth, working capital and strategic expansion. Given the turbulent global environment and volatile capital market, we may not be able to secure such financing in a timely manner and with favorable terms. Any such capital raise involving the sale of equity securities would result in dilution to our shareholders. If we cannot raise the required funds, or cannot raise them on terms acceptable to us or investors, we may be forced to curtail substantially our current operations and scale down our growth plan.
The market for robotics and interactive visual-stimulation smart rehabilitation systems are in the early growth stage, and important assumptions about the potential market for our current and future products may not be realized.
Although the market for robotics and interactive visual-stimulation “smart” rehabilitation systems has enjoyed increasing recognition from our customers, to date, the market is small. Significant market development efforts are still required to cross in order for us to enjoy accelerating growth. As such, it is difficult to predict the future size and rate of growth of the market; and we cannot assure you that our estimate regarding our current products is achievable or that our estimate regarding future products profile will remain the same. If our estimates of our current or future addressable market are incorrect, our business may not develop as we expect, and the price of our securities may suffer.
Currently, most of our products are purchased by customers as capital equipment, funded by our customers’ own capital budgets, government grants, or charitable organizations’ donations. There is a risk that such grants or donations may not be secured timely or at all or capital budgets reduced; which could adversely impact our sales forecasts.
While we have seen significant interest in our products to support our growth plan, due to limited sales and clinician application personnel that are instrumental to our efforts to convert such interest into sales orders, at any quarter we can only focus on a fraction of the total sales opportunities. Accordingly, if there are delays or disruptions to potential customers’ budgeting processes due to customers’ internal capital budget limitations, delays in funding of government grants or charitable organizations’ donations, our sales opportunities may not be realized.
In the future, we may develop operational leasing or vendor-enabled financing to expand our growth beyond capital budget limitations, as part of our efforts to enrich and expanding our business models. There can be no assurance that we will have adequate working capital to do so after the Business Combination.
If we are unable to train customers on the safe and appropriate use of our products, we may be unable to achieve our expected growth.
It is critical to the success of our commercialization efforts to train a sufficient number of customers and provide them with adequate instruction in the safe and appropriate use of our products. This training process may take longer than expected and may therefore affect our ability to increase sales. Following completion of training, we rely on the trained customers to advocate the benefits of our products in the marketplace. Convincing our customers to dedicate the time and energy necessary for adequate training is challenging, and we cannot assure you that we will be successful in these efforts. If we cannot attract potential new customers to our education and training programs, we may be unable to achieve our expected growth. If our customers are not properly trained, they may misuse or ineffectively use our products. This may also result in, among other things, unsatisfactory patient outcomes, patient injury, publicity or lawsuits us, any of which could have an effect on our business and reputation.
If customers misuse our products, we may become subject to prohibitions on the sale or marketing of our products, significant fines, penalties, sanctions, or product liability claims, and our image and reputation within the industry and marketplace could be harmed.
Our customers may also misuse our devices, or our future products or use improper techniques, potentially leading to adverse results, side effects or injury, which may lead to product liability claims. If our current or future products are misused or used with improper techniques or are determined to cause or contribute to consumer harm, we may become subject to costly litigation by our customers or their patients. Product liability claims could divert management’s attention from our core business, be expensive to defend, result in sizable damage awards against us that may not be covered by insurance and subject us to publicity resulting in reduced sales of our products. Furthermore, the use of our current or future products for indications other than those cleared by the FDA may not effectively treat such conditions, which could our reputation in the marketplace among physicians and consumers. Any of these events could our business and results of operations and cause our stock price to .
If we are unable to educate clinicians on the safe, effective and appropriate use of our products, we may experience increased claims of product liability and may be unable to achieve our expected growth.
Certain of our products require the use of specialized techniques and/or product-specific knowledge. It is critical to the success of our business to broadly educate clinicians who use or desire to use our products in order to provide them with adequate instructions in the appropriate use of our products. It is also important that we educate our other customers and patients on the risks associated with our products. Failure to provide adequate training and education could result in, among other things, unsatisfactory patient outcomes, patient injury, negative publicity or increased product liability claims or lawsuits against us, any of which could have a material and adverse effect on our business and reputation. We make extensive educational resources available to clinicians and our other customers in an effort to ensure that they have access to current treatment methodologies, are aware of the advantages and risks of our products, and are educated regarding the safe and appropriate use of our products. However, there can be no assurance that these resources will prevent all events and if we to educate clinicians, our other customers and patients, they may make decisions or form conclusions regarding our products without full knowledge of the risks and benefits or may view our products . In addition, us may occur even if such are without merit and/or no product is present, due to, for example, surgical techniques, use of our products, or other of awareness regarding the safe and use of our products. Any of these events could our business and results of operations.
As an emerging leader in a fragmented industry, we need time and efforts to develop talent, expertise, competencies, process and infrastructure; if we lose key employees or fail to replicate and leverage our sales, marketing, and training infrastructure, our growth would suffer adverse effects.
A key element of our long-term business strategy is the continued leveraging of our sales, marketing, clinical training and services infrastructure, through the training, retention, and motivation of skilled sales, marketing, clinical applications training, and services representatives with industry experience and knowledge. In order to continue growing our business efficiently, we need coordinate the development of our sales, marketing, clinical training and services infrastructure with the timing of market expansion, new product launch, regulatory approvals, limited resources consideration and other factors in various geographies. Managing and maintaining our sales and marketing infrastructure is expensive and time consuming, and an inability to leverage such an organization effectively, or in coordination with regulatory or other developments, could inhibit potential sales and the penetration and adoption of our products into both existing and new markets.
Newly hired sales representatives require training and take time to achieve full productivity. If we fail to train new hires adequately, or if we experience high turnover in our sales force in the future, we cannot be certain that new hires will become as productive as may be necessary to maintain or increase our sales. In addition, if we are not able to retain existing and recruit new trainers to our clinical staff, we may not be able to successfully train customers on the use of our sophisticated products, which could inhibit new sales and harm our reputation. If we are unable to expand our sales, marketing, and training capabilities, we may not be able to effectively commercialize our products, or enhance the strength of our brand, which could have a material adverse effect on our operating results.
The health benefits of our products have not yet been substantiated by long-term large randomized clinical data, which could limit sales of such products.
Although there have been numerous published research studies supporting the benefits of our products and users of our products have reported encouraging health benefits of our products, currently there is no large scale, randomized clinical trial establishing the long-term health benefits of our or competitors’ products due to the relatively small size of the applicable user population, and the fragmented application practice that we are still in the early stage to change through consolidation and integration. While many of the top rehabilitation hospitals have purchased some of our products, many potential conservative customers and healthcare providers may be slower to adopt or recommend our products.
Our success depends largely upon consumer satisfaction with the effectiveness of our products.
In order to generate repeat and referral business, consumers must be satisfied with the effectiveness of our products. If consumers are not satisfied with the benefits of our products, our reputation and future sales could suffer.
For certain of our products, we rely on sole source third parties to manufacture and supply certain raw materials. If these manufacturers are unable to supply these raw materials or products in a timely manner, or at all, we may be unable to meet customer demand, which would have a material adverse effect on our business.
We currently depend on sole source, third party manufacturers, to manufacture and supply certain raw materials and products. We cannot assure you that these manufacturers will be able to provide these raw materials, and products in quantities that are sufficient to meet demand in a timely manner, or at all, which could result in decreased revenues and loss of market share. There may be delays in the manufacturing process over which we have no control, including shortages of raw materials, labor disputes, backlogs and failure to meet FDA standards. We are aware that certain of our sole source manufacturers also rely on sole source suppliers with respect to materials used in our products. We rely on our third-party manufacturers to maintain their manufacturing facilities in compliance with applicable international, FDA and other federal, state and/or local regulations including health, safety and environmental standards. If they fail to maintain compliance with critical regulations, they could be ordered to suspend, or operations, which would have a material impact on our business. Increases in the prices we pay our manufacturers, in our supply of raw materials or products, or in quality, such as to meet our specifications and other regulatory requirements, could materially affect our business. Any manufacturing or discovered after our products have been produced and distributed could result in significant consequences, including procedures and to our reputation. Our ability to replace an existing manufacturer may be , because the number of potential manufacturers is limited. If we do undertake to negotiate terms of supply with another manufacturer or other manufacturers, our relationships with our existing manufacturers could be . Any in the supply of raw materials or products, or the to obtain these raw materials or products from alternate sources in a timely manner, could our ability to meet the demands of our customers, which would have a material effect on our business.
We utilize independent distributors who are free to market other products that compete with our products for sales.
While we have proportionally more influence on the independent distributors we are using to cover majority of the global markets due to our limited direct sales force, considering the fact that the rehabilitation technology market is very fragmented, we generally do not sign mutual exclusive distribution agreement with distributors. Consequently, our distribution partners could indirectly compete against our interests by promoting alternative technologies to prospective customers in lieu of ours. We believe that as we assemble more and integrated offering through our consolidation and integration strategy, the influence and motivation we may impose on our distribution partners to dedicate on selling and promoting our products and solution shall increase and such kind of competition risk would be better addressed.
To ensure credibility and enforce the effective genesis of our distributor management, we may terminate a distributor who has not demonstrated its best efforts and/or interests in selling and promoting our products and solutions, albeit such termination may adversely affect our sales performance in the market covered by such distributor.
Due to the nature of market fragmentation, our product and solution offerings may not always deliver the targeted sales amount, or may take longer than expected to establish itself in customers minds, and accepted by mainstream.
The fragmented market reflects both opportunity for consolidation and challenges of overcoming customers’ mindsets used to using alternative approaches as well as fragmented clinical practices. Change and acceptance of new idea and solution normally happens over time and in multiple wave-shaped phases instead of a straight line progression. Consequently, our new innovative product and solution offerings may not deliver the targeted sales amount or face uncertain time periods for customers to accept due to various dynamic factors that may influence the perceptions and consensus formation among prospective customers. Consequently, such judgments and self-reinforcing efforts may cause the actual results to deviate from our planned results for a sustained period, which may have adverse effect on our performance.
We may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, business acquisitions or partnerships with third parties that may not result in the development of commercially viable products, the generation of significant future revenue, or consistent realization of deal economics.
In the ordinary course of our business, we may enter into collaborations, in-licensing arrangements, joint ventures, strategic alliances, business acquisitions, partnerships or other arrangements to develop our products and to pursue new geographic or product markets. Proposing, negotiating, and implementing collaborations, in-licensing arrangements, joint ventures, strategic alliances, or partnerships may be a lengthy and complex process.
We may not identify, secure, or complete any such transactions or arrangements in a timely manner, on a cost-effective basis, on acceptable terms or at all. We have limited institutional knowledge and experience with respect to these business development activities, and we may also not realize the anticipated benefits from some of those transactions or arrangements.
Additionally, as we pursue these arrangements and choose to pursue other collaborations, in-licensing arrangements, joint ventures, strategic alliances, or partnerships in the future, we may not be in a position to exercise sole decision-making authority regarding the transaction or arrangement. This could create the potential risk of creating impasses on decisions, and our collaborators may have economic or business interests or goals that are, or that may become, inconsistent with our business interests or goals. It is possible that conflicts may arise with our collaborators. Our collaborators or any future collaborators may act in their self-interest, which may be adverse to our best interest, and they may breach their obligations to us. Disputes between us and our or any future may result in or arbitration which would increase our expenses and the attention of our management. Further, these transactions and arrangements are contractual in nature and may be or dissolved under the terms of the applicable agreements. Our or any future may that we have our agreement with them, and accordingly seek to such agreement, which could affect our competitive business position and our business prospects.
Furthermore, due to the fragmentation nature and the fact that most acquisition targets are at sub-optimal immature organization stage with less than $10 million in revenue, the risk of integrating such organizations and products can also be higher than acquisitions and consolidations in a mature industry. Consequently, there are risks that some of those acquisitions may fail to deliver the expected deal economics and could have adverse effect on our financial condition and business results.
We may not successfully integrate newly acquired product lines into our business operations or realize the benefits of our partnerships with other companies, acquisitions of complementary products or technologies or other strategic alternatives.
Historically we have acquired or gained the rights to our product lines through acquisitions and other strategic alternatives. As a result of these acquisitions, we have undergone substantial changes to our business and product offerings in a short period of time. Additionally, in the future, we may consider other opportunities to partner with or acquire other businesses, products or technologies that may enhance our product platform or technology, expand the breadth of our markets or customer base or advance our business strategies.
Although we have previously been successful in integrating such products and technologies into our business and operations, there can be no assurances that we will continue to do so in the future. If we fail to successfully integrate collaborations, assets, products or technologies, or if we fail to successfully exploit acquired product or distribution rights, our business could be harmed. Furthermore, we may have to incur debt or issue equity securities in connection with proposed collaborations or to pay for any product acquisitions or investments, the issuance of which could be dilutive to our existing shareholders. Identifying, contemplating, negotiating or completing a collaboration or product acquisition and integrating an acquired product or technology could significantly divert management and employee time and resources.
Moreover, integrating new product lines with that of our own is a complex, costly and time-consuming process, which requires significant management attention and resources. The integration process may disrupt our existing operations and, if implemented ineffectively, would preclude realization of the full benefits that are expected. Our failure to meet the challenges involved in successfully integrating our acquisitions in order to realize the anticipated benefits may cause an interruption of, or a loss of momentum in, our operating activities and could adversely affect our results of operations. Potential difficulties, costs, and delays we may encounter as part of the integration process may include:
distracting management from day-to-day operations;
an inability to achieve synergies as planned;
risks associated with the assumption of contingent or other liabilities;
adverse effects on existing business relationships with suppliers or customers;
inheriting and uncovering previously unknown issues, problems and costs from the acquired product lines;
uncertainties associated with entering new markets in which we have limited or no experience;
increased legal and accounting costs relating to the product line or compliance with regulatory matters;
delays between our expenditures to acquire new products, technologies or businesses and generating net sales from those acquired products, technologies or businesses; and
increased difficulties in managing our business due to increased personnel, increased data and information to analyze, and the potential addition of international locations.
Any one or all of these factors may increase operating costs or lower anticipated financial performance. Many of these factors are also outside of our control. In addition, even if new product lines or businesses are integrated successfully, we may not realize the full benefits of the acquisition, including the synergies, cost savings or sales or growth opportunities that we expect or within the anticipated time frame. Additional unanticipated costs may be incurred in the integration of product lines or businesses. All of these factors could decrease or delay the expected accretive effect of the transaction, and negatively impact the price of our common stock. The failure to integrate any acquired product line or business successfully would have a material adverse effect on our business, financial condition and results of operations.
We may pursue acquisitions, which involve a number of risks, and if we are unable to address and resolve these risks successfully, such acquisitions could harm our business.
We may in the future acquire businesses, products or technologies to expand our offerings and capabilities, user base and business. We have evaluated, and expect to continue to evaluate, a wide array of potential strategic transactions; however, we have limited experience completing or integrating acquisitions. Any acquisition could be material to our financial condition and results of operations and any anticipated benefits from an acquisition may never materialize. In addition, the process of integrating acquired businesses, products or technologies may create unforeseen operating difficulties and expenditures. Acquisitions in international markets would involve additional risks, including those related to integration of operations across different cultures and languages, currency risks and the particular economic, political and regulatory risks associated with specific countries.
The process of integrating an acquired business, product or technology can create unforeseen operating difficulties, expenditures and other challenges such as:
potentially increased regulatory and compliance requirements;
implementation or remediation of controls, procedures and policies at the acquired company;
diversion of management time and focus from operation of its then-existing business to acquisition integration challenges;
coordination of product, sales, marketing and program and systems management functions;
transition of the acquired company’s users and providers onto our systems;
retention of employees from the acquired company;
integration of employees from the acquired company into our organization;
integration of the acquired company’s accounting, information management, human resources and other administrative systems and operations into our systems and operations;
liability for activities of the acquired company prior to the acquisition, including violations of law, commercial disputes and tax and other known and unknown liabilities; and
litigation or other claims in connection with the acquired company, including claims brought by terminated employees, providers, former stockholders or other third parties.
We may not be able to address these risks successfully, or at all, without incurring significant costs, delays or other operational problems and if we were unable to address such risks successfully our business could be harmed.
We may have difficulty managing our growth which could limit our ability to increase sales and cash flow.
We anticipate experiencing significant growth in our operations and the number of our employees if our current and future products are successful. This growth will place significant demands on our management, as well as our financial and operational resources. In order to achieve our business objectives, we will need to grow our business. Continued growth would increase the challenges involved in:
implementing appropriate operational and financial systems;
expanding our sales and marketing infrastructure and capabilities;
ensuring compliance with applicable FDA, and other regulatory requirements;
providing adequate training and supervision to maintain high quality standards; and
preserving our culture and values.
Our growth will require us to continually develop and improve our operational, financial and other internal controls. If we cannot scale and manage our business appropriately, we will not realize our projected growth and our financial results could be adversely affected.
Risks Related to Government Regulation
We are subject to extensive and dynamic medical device regulation, which may impede or hinder the approval or sale of our products and, in some cases, may ultimately result in an inability to obtain approval of certain products or may result in the recall or seizure of previously approved products.
Our products, marketing, sales and development activities and manufacturing processes are subject to extensive and rigorous regulation by various regulatory agencies and governing bodies. Under the US Food, Drug and Cosmetic Act, medical devices must receive FDA clearance or approval or an exemption from such clearance or approval before they can be commercially marketed in the United States. In the European Union, we are required to comply with applicable medical device directives (including the Medical Devices Directive and the European Medical Device Regulation) and obtain CE Mark (European Conformity) certification in order to market medical devices. In addition, exported devices are subject to the regulatory requirements of each country to which the device is exported. Many countries require that product approvals be renewed or recertified on a regular basis, generally every four to five years. The renewal or recertification process requires that we evaluate any device changes and any new regulations or standards relevant to the device and conduct appropriate testing to document continued compliance. Where renewal or recertification applications are required, they may need to be renewed and/or approved in order to continue selling our products in those countries. There can be no assurance that we will receive the required approvals for new products or modifications to existing products on a timely basis or that any approval will not be subsequently withdrawn or conditioned upon extensive post-market study requirements.
The European Union regulatory bodies finalized a new Medical Device Regulation (“ MDR ”) in 2017, which replaced the existing directives and provided three years for transition and compliance. The MDR changes several aspects of the existing regulatory framework, such as updating clinical data requirements and introducing new ones, such as Unique Device Identification. We and those who will oversee compliance to the new MDR face uncertainties as the MDR is rolled out and enforced by the Commission and EEA Competent Authorities, creating risks in several areas, including the CE Marking process and data transparency, in the upcoming years.
Regulations regarding the development, manufacture and sale of medical devices are evolving and subject to future change. We cannot predict what impact, if any, those changes might have on our business. Failure to comply with regulatory requirements could have a material adverse effect on our business, financial condition and results of operations. Later discovery of previously unknown problems with a product or manufacturer could result in fines, delays or suspensions of regulatory clearances or approvals, seizures or recalls of products, physician advisories or other field actions, operating restrictions and/or criminal prosecution. We may also initiate field actions as a result of a failure to strictly comply with our internal quality policies. The failure to receive product approval clearance on a timely basis, suspensions of regulatory clearances, seizures or of products, physician advisories or other field actions, or the withdrawal of product approval by regulatory authorities could have a material effect on our business, financial condition or results of operations.
If we fail to obtain regulatory approvals in the United States or foreign jurisdictions for our products, or any future products, we will be unable to market our products in those jurisdictions.
In addition to regulations in the United States, we are subject to a variety of foreign regulations governing manufacturing, clinical trials, commercial sales and distribution of our future products. Whether or not we obtain FDA approval for a product, we must obtain approval of the product by the comparable regulatory authorities of foreign countries before commencing clinical trials or marketing in those countries. The approval procedures vary among countries and can involve additional clinical testing, or the time required to obtain approval may differ from that required to obtain FDA approval. Clinical trials conducted in one country may not be accepted by regulatory authorities in other countries. Approval by the FDA does not ensure approval by regulatory authorities in other countries, and approval by one or more foreign regulatory authorities does not ensure approval by regulatory authorities in other foreign countries or by the FDA. The foreign regulatory approval process may include all of the risks associated with obtaining FDA approval.
Due to the fact that more than 95% of our revenue comes from health-regulated medical device products, if we do not obtain or maintain necessary regulatory clearances or approvals, or if clearances or approvals for future medical products or modifications to existing medical products are delayed or not issued, our commercial operations and sales targets would be adversely affected .
We operate under highly regulated global health markets and must register and maintain effectiveness and compliance of such registration, with each of our medical devices with every markets’ relevant authority either directly or through our agent or distributors. Any missing or failure to comply with such registrations may disrupt any sales activities in that particular market, and result in adverse effects.
We may be subject to adverse medical device reporting obligations, voluntary corrective actions or agency enforcement actions.
The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on an FDA finding that there is reasonable probability that the device would cause serious injury or death. Manufacturers may also, under their own initiative, recall a product if any material deficiency in a device is found or withdraw a product to improve device performance or for other reasons. The FDA requires that certain classifications of recalls be reported to the FDA within 10 working days after the recall is initiated. A government-mandated or voluntary by us or one of our distributors could occur as a result of a perceived or actual risk to health, component , , manufacturing , design or labelling or other and issues. Regulatory agencies in other countries have similar authority to devices because of material or in design or manufacture that could health. Any would management attention and financial resources and could cause the price of our stock to , us to product liability or other and our reputation with customers. Such events could our ability to produce our products in a cost- and timely manner in order to meet customer demands. A involving our silicone gel breast implants could be particularly to our business, financial and operating results. Companies are required to maintain certain records of , even if they are not reportable to the FDA or similar foreign governmental authorities. We may initiate voluntary involving our products in the future that we determine do not require notification of the FDA or foreign governmental authorities. If the FDA or foreign governmental authorities with our determinations, they could require us to report those actions as . A future announcement could our reputation with customers and affect our sales. In addition, the FDA or a foreign governmental authority could take enforcement action for to report the when they were conducted.
In addition, under the FDA’s medical device reporting regulations, we are required to report to the FDA any incident in which our product may have caused or contributed to a death or serious injury or in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. Repeated product malfunctions may result in a voluntary or involuntary product recall. We are also required to follow detailed record-keeping requirements for all self-initiated medical device corrections and removals, and to report such corrective and removal actions to the FDA if they are carried out in response to a risk to health and have not otherwise been reported under the medical device reporting regulations. Depending on the corrective action we take to address a product’s deficiencies or , the FDA may require, or we may decide, that we need to obtain new approvals or clearances for the device before marketing or distributing the device. Seeking such approvals or clearances may our ability to replace the devices in a timely manner. Moreover, if we do not address associated with our devices, we may face additional regulatory enforcement action, including FDA letters, product seizure, , administrative , or civil or . We may also be required to bear other costs or take other actions that may have a impact on our sales as well as face significant publicity or regulatory consequences, which could our business, including our ability to market our products in the future.
Any adverse event involving our products, whether in the United States or abroad, could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, will likely oblige us to defend ourselves in resulting lawsuits, and will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.
Legislative or regulatory healthcare reforms in the United States and other countries may make it more difficult and costly for us to obtain regulatory clearance or approval of any future product candidates and to produce, market, and distribute our products after clearance or approval is obtained.
Recent political, economic and regulatory influences are subjecting the health care industry to fundamental changes. Both the federal and state governments in the United States and foreign governments continue to propose and pass new legislation and regulations designed to contain or reduce the cost of health care, improve quality of care, and expand access to healthcare, among other purposes. Such legislation and regulations may result in decreased reimbursement for medical devices and/or the procedures in which they are used, which may further exacerbate industry-wide pressure to reduce the prices charged for medical devices. This could harm our ability to market and generate sales from our products.
In addition, regulations and guidance are often revised or reinterpreted by governmental agencies, including the FDA, CMS, and the Department of Health and Human Services Office of the Inspector General (“ OIG ”) and others, in ways that may significantly affect our business and our products. Any new regulations, revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of our products.
In the future there may continue to be additional proposals relating to the reform of the United States. healthcare system. Certain of these proposals could limit the prices we are able to charge for our products or the amount of reimbursement available for our products, and could limit the acceptance and availability of our products, any of which could have a material adverse effect on our business, results of operations and financial condition.
United States and foreign privacy and data protection laws and regulations may impose additional liabilities on us.
While we do not store patient data at our premises or DIH-managed data center, United States, federal and state privacy and data security laws and regulations regulate how we and our partners collect, use and share certain information. In addition to HIPAA, certain state laws govern the privacy and security of health information in certain circumstances, some of which are more stringent than HIPAA and many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable, can result in the imposition of significant civil and/or criminal penalties and private litigation. For example, the California Consumer Privacy Act, or CCPA, went into effect January 1, 2020. The CCPA, among other things, creates new data privacy obligations for covered companies and provides new privacy rights to California residents, including the right to opt out of certain disclosures of their information. The CCPA also creates a private right of action with statutory damages for certain data breaches, thereby potentially increasing risks associated with a data . The CCPA was recently amended by the California Privacy Rights Act or CPRA, expanding certain consumer rights such as the right to know. It remains unclear what, if any, additional modifications will be made to these laws by the California legislature or how these laws will be interpreted and enforced. The California Attorney General has issued clarifying regulations and initiating enforcement activity. The potential effects of the CCPA and CPRA are significant and may cause us to incur substantial costs and expenses to comply. The CCPA has prompted a wave of proposals for new federal and state privacy legislation, some of which may be more than the CCPA, that, if passed, could increase our potential liability, increase our compliance costs, and affect our business.
We may also be subject to or affected by foreign laws and regulations, including regulatory guidance, governing the collection, use, disclosure, security, transfer, and storage of personal data, such as information that we collect about customers and patients in connection with our operations abroad. The global legislative and regulatory landscape for privacy and data protection continues to evolve, and implementation standards and enforcement practices are likely to remain uncertain for the foreseeable future. This evolution may create uncertainty in our business, result in liability, or impose additional costs on us. The cost of compliance with these laws, regulations and standards is high and is likely to increase in the future.
For example, the European Union implemented the General Data Protection Regulation (“ GDPR ”) a broad data protection framework that expands the scope of European Union data protection law to include certain non-European Union entities that process the personal data of European Union residents, including clinical trial data. The GDPR increases our compliance burden with respect to data protection, including by mandating potentially burdensome documentation requirements and granting certain rights to individuals to control how we collect, use, disclose, retain and protect information about them. The processing of sensitive personal data, such as information about health conditions, leads to heightened compliance burdens under the GDPR and is a topic of active interest among European Union regulators. In addition, the GDPR provides for breach reporting requirements, more robust regulatory enforcement and fines of up to the greater of 20 million euros or 4% of annual global revenue. The GDPR increases our responsibility and liability in relation to personal data that we process, and we may be required to put in place additional mechanisms to ensure compliance with the GDPR, which could divert management’s attention and increase our cost of doing business.
A data security breach or other privacy violation that compromises the confidentiality, integrity or availability of the personal information of our customers, clinical trials participants, collaborators or employees could harm our reputation, compel us to comply with United States. or international breach notification laws, subject us to mandatory corrective action, and otherwise subject us to liability under United States. or foreign laws and regulations. Data breaches or other security incidents could also compromise our trade secrets or other intellectual property. If we are unable to prevent such data security breaches and security incidents or implement satisfactory remedial measures, our operations could be disrupted, and we may suffer reputational , financial or other regulatory . In addition, such events can be to detect, and any in identifying them may lead to increased .
Finally, it is possible that these privacy laws may be interpreted and applied in a manner that is inconsistent with our practices. Any failure or perceived failure by us to comply with federal, state, or foreign laws or self-regulatory organization’s rules or regulations could result in an expense or liability to us.
Changes in law or regulation could make it more difficult and costly for DIH and its subsidiaries to manufacture, market and distribute its products or obtain or maintain regulatory approval of new or modified products.
The experience with the transition to the EU MDR showed how complex, time-consuming and expensive a change in Medical Device Legislation can be. Progression on innovations and new products could be significantly delayed during the work on compliance with new legislations.
We may fail to comply with regulations of the United States and foreign regulatory agencies which could delay, or prevent entirely, and the commercialization of our products.
Given the non-invasive and lower risk nature of rehabilitation products, similar to other rehabilitation technology providers, most of our products are in FDA risk class 1 and this class is not subject to mandatory scrutiny by the U.S. authorities. There is the possibility that, in the future, the FDA may not agree with our classification. We might have to register if disagreement arises, and consequently we would have to stop distributing the device in the U.S. Under such a scenario, possible alternatives registration pathways might be 510(k)s or PMAs, which amount to an increase in the registration time from six months to multiple years; result in significant suspension of our sales activity for products in question in the US.
In some instances, in our advertising and promotion, we may make claims regarding our product as compared to competing products, which may subject us to heightened regulatory scrutiny, enforcement risk, and litigation risks.
The FDA applies a heightened level of scrutiny to comparative claims when applying its statutory standards for advertising and promotion, including with regard to its requirement that promotional labelling be truthful and not misleading. There is potential for differing interpretations of whether certain communications are consistent with a product’s FDA-required labelling, and FDA will evaluate communications on a fact-specific basis.
In addition, making comparative claims may draw attention from our competitors. Where a company makes a claim in advertising or promotion that its product is superior to the product of a competitor (or that the competitor’s product is inferior), this creates a risk of a lawsuit by the competitor under federal and state false advertising or unfair and deceptive trade practices law, and possibly also state libel law. Such a suit may seek injunctive relief against further advertising, a court order directing corrective advertising, and compensatory and punitive damages where permitted by law.
Any such lawsuit or threat of lawsuit against us will likely oblige us to defend ourselves in court, and will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results. If any such lawsuit against us is successful, we would suffer additional losses of time and capital in taking any required corrective action and would suffer harm to our reputation, all of which would have an adverse effect on our business.
If we fail to obtain or maintain the necessary ISO 13485 certification or the certification according to (EU) 2017/745 (MDR), our commercial operations in the EU and some other countries will be harmed.
As the certifications according to ISO 13485 and (EU) 2017/745 constitute the legal basis for any commercial activity in the European Union and many other countries, these certifications and maintenance of such certifications is a vital task for us. Failure to certify will lead to a disruption of device sales not only in the European Union, but also in the United States and many other countries, as these usually consider a certification a prerequisite for any device registrations.
The majority of our products are classified as medical devices and are regulated by the FDA, the European Union and other governmental authorities both inside and outside of the United States. These agencies enforce laws and regulations that govern the development, testing, manufacturing, labeling, advertising, marketing and distribution, and market surveillance of our medical products. Our failure to comply with these complex laws and regulations could have a material adverse effect on our business, results of operations, financial condition and cash flows. Even after regulatory clearance or approval has been granted, a cleared or approved product and its manufacturer are subject to extensive regulatory requirements relating to manufacturing, labeling, packaging, adverse event reporting, storage, advertising and promotion for the product. If we fail to comply with the regulatory requirements of the FDA or other non-U.S. regulatory authorities, or if previously unknown problems with our products or manufacturing processes are discovered, we could be subject to administrative or judicially imposed sanctions, including restrictions on the products, manufacturers or manufacturing process; adverse inspectional observations (Form 483), warning letters, non- letters incorporating inspectional observations; civil or or ; ; product seizures, or import ; voluntary or mandatory product and publicity requirements; or withdrawal of regulatory clearances or approvals; total or partial of production; imposition of restrictions on operations, including new manufacturing requirements; to clear or approve pending applications or premarket notifications; and import and export
Modifications to our products may require re-registration, new 510(k) clearances or premarket approvals, or may require us to renew existing registrations in non-European Union countries.
Product modifications consisting either of changes to hardware or software or in expanding or restricting indications or contraindications can have an impact on the validity of our registrations. Thus, a product modification may lead to regulatory change projects, which will consume time and resources. A delay in marketing activities for the respective products may result. Many of these changes are beyond our control, as they are initiated by suppliers of components. Often those changes cannot be predicted, as their announcement happens on short notice, thus increasing the risk of business disruption.
The innovative development of our products may lead to the application of new laws, regulations, standards, etc. not considered until now.
Developing our products further in the direction of increasingly independent acting devices might bring those products into the scope of standards or regulations for robotic devices or artificial intelligence, or other similar areas. As this requires further competencies, resources and time, a potential delay or disruption of our commercial activities could result.
Any negative publicity concerning our products could harm our business and reputation and negatively impact our financial results.
The reactions of potential patients, physicians, the news media, legislative and regulatory bodies and others to information about complications or alleged complications of our products could result in negative publicity and could materially reduce market acceptance of our products. These reactions, or any investigations and potential resulting negative publicity, may have a material adverse effect on our business and reputation and negatively impact our financial condition, results of operations or the market price of our common stock. In addition, significant negative publicity could result in an increased number of product liability claims against us.
United States or European healthcare reform measures and other potential legislative initiatives could adversely affect our business.
Europe and the United States are our major markets, and any major healthcare reform that may change the health industry landscape or reimbursement environment, may have a significant impact on our sales performance and growth projects in the affected markets.
Any political changes in the United States or in Europe could result in significant changes in, and uncertainty with respect to, legislation, regulation, global trade, and government policy that could substantially impact our business and the medical device industry generally. The FDA and European Union Commission’s policies may also change, and additional government regulations may be issued that could prevent, limit, or delay regulatory approval of our future products, or impose more stringent product labeling and post-marketing testing and other requirements.
Risks Related to War in Ukraine and Israel and Palestine
The credit and financial markets have experienced extreme volatility and disruptions due to the current conflict between Ukraine and Russia. The conflict is expected to have further global economic consequences, including but not limited to the possibility of severely diminished liquidity and credit availability, declines in consumer confidence, declines in economic growth, increases in inflation rates and uncertainty about economic and political stability. In addition, the United States and other countries have imposed sanctions on Russia which increases the risk that Russia, as a retaliatory action, may launch cyberattacks against the United States, its government, infrastructure and businesses. Any of the foregoing consequences, including those we cannot yet predict, may cause our business, financial condition, results of operations and the price of our Common Stock to be affected.
Risks Related to Our Intellectual Property and Information Technology
We depend on computer and information systems we do not own or control and failures in our systems or a cybersecurity attack or breach of our IT systems or technology could significantly disrupt our business operations or result in sensitive information being compromised which would adversely affect our reputation and/or results of operations.
We have entered into agreements with third parties for hardware, software, telecommunications, and other information technology services in connection with the operation of our business. It is possible we or a third party that we rely on could incur interruptions from a loss of communications, hardware or software failures, a cybersecurity attack or a breach of our IT systems or technology, computer viruses or malware. Though most of those information systems and platforms are provided by well-established multinational firms like Oracle and Microsoft, any interruptions to our arrangements with third parties, to our computing and communications infrastructure, or to our information systems or any of those operated by a third party that we rely on could significantly disrupt our business operations.
In the current environment, there are numerous and evolving risks to cybersecurity and privacy, including criminal hackers, hacktivists, state-sponsored intrusions, industrial espionage, employee malfeasance and human or technological error. A cyberattack of our systems or networks that impairs our information technology systems could disrupt our business operations and result in loss of service to customers, including technical support for our robotics and interactive visual-stimulation devices.
Our success depends in part on our ability to obtain and maintain protection for the intellectual property relating to or incorporated into our products.
Our success depends in part on our ability to obtain and maintain protection for the intellectual property relating to or incorporated into our products. We seek to protect our intellectual property through a combination of patents, trademarks, confidentiality, and assignment agreements with our employees and certain of our contractors, as well as confidentiality agreements with certain of our consultants, scientific advisors, and other vendors and contractors. In addition, we rely on trade secrets law to protect our proprietary software and product candidates/products in development.
The patent position of robotic and interactive visual-stimulation inventions can be highly uncertain and involves many new and evolving complex legal, factual, and technical issues. Patent laws and interpretations of those laws are subject to change and any such changes may diminish the value of our patents or narrow the scope of our right to exclude others. In addition, we may fail to apply for or be unable to obtain patents necessary to protect our technology or products from copycats or fail to enforce our patents due to lack of information about the exact use of technology or processes by third parties. Also, we cannot be sure that any patents will be granted in a timely manner or at all with respect to any of our patent pending applications or that any patents that are granted will be adequate to exclude others for any significant period of time or at all. Given the foregoing and in order to continue reducing operational expenses in the future, we may invest fewer resources in filing and prosecuting new patents and on maintaining and enforcing various patents, especially in regions where we currently do not focus our market growth strategy.
Litigation to establish or challenge the validity of patents, or to defend against or assert against others infringement, unauthorized use, enforceability, or invalidity, can be lengthy and expensive and may result in our patents being invalidated or interpreted narrowly and restricting our ability to be granted new patents related to our pending patent applications. Even if we prevail, litigation may be time consuming, force us to incur significant costs, and could divert management’s attention from managing our business while any damages or other remedies awarded to us may not be valuable.
In addition, we seek to protect our trade secrets, know-how, and confidential information that is not patentable by entering into confidentiality and assignment agreements with our employees and certain of our contractors and confidentiality agreements with certain of our consultants, scientific advisors, and other vendors and contractors. However, we may fail to enter into the necessary agreements, and even if entered into, these agreements may be breached or otherwise fail to prevent disclosure, third-party infringement, or misappropriation of our proprietary information, may be limited as to their term and may not provide an adequate remedy in the event of unauthorized disclosure or use of proprietary information. Enforcing a claim that a third party illegally obtained or is using our trade secrets without authorization may be expensive and time consuming, and the outcome is unpredictable. Some of our employees or consultants may own certain technology which they license to us for a set term. If these technologies are material to our business after the term of the license, our inability to use them could affect our business and .
We are not able to protect our intellectual property rights in all countries.
Filing, prosecuting, maintaining, and defending patents on each of our products in all countries throughout the world would be prohibitively expensive, and thus our intellectual property rights outside the United States and Europe are limited. In addition, the laws of some foreign countries, especially developing countries, such as China, do not protect intellectual property rights to the same extent as federal and state laws in the United States. It may not be possible to effectively enforce intellectual property rights in some countries at all or to the same extent as in the United States and other countries. Consequently, we are unable to prevent third parties from using our inventions in all countries, or from selling or importing products made using our inventions in the jurisdictions in which we do not have (or are unable to effectively enforce) patent protection. Copycats may use our technologies in jurisdictions where we have not obtained patent protection to develop, market or otherwise commercialize their own products, and we may be unable to prevent those copycats from importing those infringing products into territories where we have patent protection, but enforcement may not be as as in the United States. These products may compete with our products and our patents and other intellectual property rights may not be or sufficient to prevent them from competing in those jurisdictions.
We may be subject to patent infringement claims, especially for products acquired through acquisitions, which could result in substantial costs and liability and prevent us from commercializing such acquired products.
The medical device industry is characterized by competing intellectual property, given the existence of large number of patents, the rapid rate of new patent issuances, and the complexities of the technology involved; and patent infringement assessments require costly due diligence and extensive resources to cope with the complexity to assess infringement risks in a complex world of regulations and intellectual property filings. As a result, we may choose not to conduct extensive and expensive intellectual property due diligence, especially for small deal value; as a consequence, we might be vulnerable to certain unknown intellectual property infringement claims, especially related to products we acquired from others. Determining whether a product infringes a patent involves complex legal and factual issues and the outcome of patent litigation is often uncertain. Even though we have conducted research of issued patents, no assurance can be given that patents containing claims covering our products, technology or methods do not exist, have not been filed or could not be filed or issued. In addition, because patent applications can take years to issue and because publication schedules for pending applications vary by jurisdiction, there may be applications now pending of which we are , and which may result in issued patents that our current or future products .
Infringement actions and other intellectual property claims brought against us, whether with or without merit, may cause us to incur meaningful costs and could place a significant strain on our financial resources, divert the attention of management, and harm our reputation.
We may be subject to damages resulting from claims that our employees or we have wrongfully used or disclosed alleged trade secrets of their former employers.
Some of our employees were previously employed at other medical device companies, including our competitors or potential competitors, and we may hire employees in the future that are so employed. We could in the future be subject to claims that these employees, or we, have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of their former employers. If we fail in defending against such claims, a court could order us to pay substantial damages and prohibit us from using technologies or features that are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. If any of these technologies or features that are important to our products, this could prevent us from selling those products and could have a material adverse effect on our business. Even if we are successful in defending against these , such could result in substantial costs and the attention of management.
Risks Related to Ownership of DIH Common Stock
We are not in compliance with the continued listing requirements of the Nasdaq Stock Market and our securities could be delisted.
Through the date this Annual Report on Form 10-K is filed, DIH has received Nasdaq deficiency notices for failure to satisfy the Market Value of Listed Securities, the Market Value of Publicly Held Shares, and the $1.00 minimum bid-price standards, and for delinquent periodic reports (Form 10-K and Form 10-Q). On these bases, Nasdaq has notified DIH that its securities are subject to delisting. DIH has requested a hearing before the Nasdaq Hearings Panel and a stay pending the hearing; there is no assurance that continued listing will be granted or that compliance will be regained within any extension period. Delisting risk could reduce trading liquidity and limit or increase the cost of access to capital markets, adversely affecting operating results.
Future sales of a substantial number of shares of DIH Common Stock by us or our large stockholders, certain of whom may have registration rights, or dilutive exercises of a substantial number of warrants by our warrant holders could adversely affect the market price of our Common Stock.
Sales by us or our stockholders of a substantial number of shares of DIH Common Stock in the public market following the Business Combination, or the perception that these sales might occur, could cause the market price of the DIH Common Stock to decline or could impair our ability to raise capital through a future sale of our equity securities. Additionally, dilutive exercises of a substantial number of warrants by our warrant-holders, or the perception that such exercises may occur, could put downward price on the market price of our Common Stock.
Future grants of shares of DIH Common Stock under our equity incentive plan to our employees, non-employee directors and consultants, or sales by these individuals in the public market, could result in substantial dilution, thus decreasing the value of your investment in DIH Common Stock. In addition, stockholders will experience dilution upon the exercise of outstanding warrants.
Shareholders approved an equity incentive plan which provides for the issuance of up to 172,000 additional shares of New DIH Common Stock. Additionally, to the extent registered on a Form S-8, shares of DIH Common Stock granted or issued under our equity incentive plans will, subject to vesting provisions and Rule 144 volume limitations applicable to our “affiliates,” be available for sale in the open market immediately upon registration. Further, as of March 31, 2025, there were 1,019,472 shares of DIH Common Stock underlying issued and outstanding warrants, which if exercised, could decrease the net tangible book value of our DIH Common Stock and cause dilution to our existing stockholders. Sales of a substantial number of the above-mentioned shares of DIH Common Stock in the public market could result in a significant decrease in the market price of the DIH Common Stock and have a material adverse effect on your investment.
If securities or industry analysts do not publish research or reports about DIH’s business, or if they issue an adverse opinion regarding its stock, its stock price and trading volume could decline.
The trading market for DIH Common Stock is influenced by the research and reports that industry or securities analysts publish about DIH or its business. DIH does not currently have and may never obtain research coverage by securities and industry analysts. Since DIH became public through a merger, securities analysts of major brokerage firms may not provide coverage of DIH since there is no incentive to brokerage firms to recommend the purchase of its common stock. If no or few securities or industry analysts commence coverage of DIH, the trading price for its stock would be negatively impacted. In the event DIH obtains securities or industry analyst coverage, if any of the analysts who cover it issues an adverse opinion regarding DIH, its business model, its intellectual property or its stock performance, or if its clinical trials and operating results fail to meet the expectations of analysts, its stock price would likely decline. If one or more of these analysts cease coverage of DIH or fail to publish reports on it regularly, DIH could lose visibility in the financial markets, which in turn could cause its stock price or trading volume to .
We are emerging growth company and a “smaller reporting company” and the reduced reporting requirements applicable to such companies may make our DIH Common Stock less attractive to investors.
DIH is an emerging growth company, as defined in the JOBS Act. For as long as DIH continues to be an emerging growth company, it may take advantage of exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in its periodic reports and proxy statements and exemptions from the requirements of holding nonbinding advisory stockholder votes on executive compensation and stockholder approval of any golden parachute payments not previously approved. DIH cannot predict if investors will find its common stock less attractive because DIH may rely on these exemptions. If some investors find DIH Common Stock less attractive as a result, there may be a less active trading market for DIH Common Stock and its stock price may be more volatile.
DIH will remain an emerging growth company until the earlier of (1) the last day of the fiscal year (a) following February 7, 2027 (the fifth anniversary of the closing of ATAK’s IPO), (b) in which it has total annual gross revenue of at least $1.235 billion, or (c) in which it is deemed to be a large accelerated filer, which requires the market value of its common stock that is held by non-affiliates to equal or exceed $700 million as of the last business day of the second fiscal quarter of such year, and (2) the date on which DIH has issued more than $1 billion in non-convertible debt during the prior three-year period.
Under the JOBS Act, emerging growth companies can also delay adopting new or revised accounting standards until such time as those standards apply to private companies. DIH has opted to continue to take advantage of the benefits of the extended transition period, although it may decide to early adopt such new or revised accounting standards to the extent permitted by such standards. This may make it difficult or impossible to compare DIH’s financial results with the financial results of another public company that is either not an emerging growth company or is an emerging growth company that has chosen not to take advantage of the extended transition period exemptions because of the potential differences in accounting standards used.
Additionally, DIH is a “smaller reporting company” as defined in Item 10(f) of Regulation S-K, which allows us to take advantage of certain scaled disclosure requirements available specifically to smaller reporting companies. For example, we may continue to use reduced compensation disclosure obligations, and we will not be obligated to follow the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act. We will remain a smaller reporting company until the last day of the fiscal year in which we have at least $100 million in revenue and at least $700 million in aggregate market value of our shares held by non-affiliated persons and entities (known as “public float”), or, alternatively, if our revenue exceeds $100 million, until the last day of the fiscal year in which our public float was at least $250.0 million (in each case, with respect to public float, as measured as of the last business day of the second quarter of such fiscal year). For the year ended March 31, 2025, DIH recorded revenue of approximately $63 million.
We cannot predict or otherwise determine if investors will find our securities less attractive as a result of our reliance on exemptions as a smaller reporting company and/or “non-accelerated filer.” If some investors find our securities less attractive as a result, there may be a less active trading market for our Common Stock and the price of our Common Stock may be more volatile.
The price of our Common Stock may be volatile, and you may lose all or part of your investment.
The market price of our Common Stock is volatile and may fluctuate substantially as a result of many factors. In addition, because the warrants are exercisable into shares of our Common Stock, volatility, or a reduction in the market price of our Common Stock could have an adverse effect on the trading price of the warrants. Factors which may cause fluctuations in the price of our Common Stock include, but are not limited to:
actual or anticipated fluctuations in our growth rate or results of operations or those of our competitors;
customer acceptance of our products;
announcements by us or our competitors of new products or services, commercial relationships, acquisitions, or expansion plans;
announcements by us or our competitors of other material developments;
our involvement in litigation;
changes in government regulation applicable to us and our products;
sales, or the anticipation of sales, of our Common Stock, warrants and debt securities by us, or sales of our Common Stock by our insiders or other shareholders, including upon expiration of contractual lock-up agreements;
developments with respect to intellectual property rights;
competition from existing or new technologies and products;
changes in key personnel;
the trading volume of the Common Stock;
changes in the estimation of the future size and growth rate of our markets;
changes in our quarterly or annual forecasts with respect to operating results and financial conditions;
general economic and market conditions and
Announcements regarding business acquisitions.
In addition, the stock markets have experienced extreme price and volume fluctuations. Broad market and industry factors may materially harm the market price of our Common Stock, regardless of our operating performance. Technical factors in the public trading market for Common Stock may produce price movements that may or may not comport with macroeconomic, industry or DIH-specific fundamentals, including, without limitation, the sentiment of retail investors (including as may be expressed on financial trading and other social media sites), the amount and status of short interest in our securities, access to margin debt, trading in options and other derivatives on our Common Stock and any related hedging or other technical trading factors. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been instituted against that company. If we become involved in any similar litigation, we could incur substantial costs and our management’s attention and resources could be diverted.
General Risks
Exchange rate fluctuations between the U.S. dollar, the Euro and the Swiss Franc may negatively affect our revenue and earnings.
The U.S. dollar is our functional and reporting currency. However, more than 50% of our sales orders come from Europe in euros; and we pay a significant portion of our expenses in euro and Swiss Francs; and we expect this to continue. As a result, we are exposed to exchange rate risks that may materially and adversely affect our financial results. Accordingly, any depreciation of the euro relative to the U.S. dollar would adversely impact our revenue, and any appreciation of Swiss Franc against U.S. dollar will adversely impact net loss or net income, if any.
Our operations also could be adversely affected if we are unable to effectively hedge against currency fluctuations in the future.
We are subject to certain regulatory regimes that may affect the way that we conduct business internationally, and our failure to comply with applicable laws and regulations could materially adversely affect our reputation and result in penalties and increased costs.
We are subject to a complex system of laws and regulations related to international trade, including economic sanctions and export control laws and regulations. We also depend on our distributors and agents for compliance and adherence to local laws and regulations in the markets in which they operate. Significant political or regulatory developments in the jurisdictions in which we sell our products, such as those stemming from the presidential administration in the United States or the U.K.’s exit from the E.U. (known as “Brexit”), are difficult to predict and may have a material adverse effect on us. For example, in the United States, the Trump administration-imposed tariffs on imports from China, Mexico, Canada, and other countries, and expressed support for greater restrictions on free trade and increase tariffs on goods imported into the United States. Changes in U.S. political, regulatory, and economic conditions or in its policies governing international trade and foreign manufacturing and investment in the United States could adversely affect our sales in the United States.
We are also subject to the U.S. Foreign Corrupt Practices Act and may be subject to similar worldwide anti-bribery laws that generally prohibit companies and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business. Despite our compliance and training programs, we cannot be certain that our procedures will be sufficient to ensure consistent compliance with all applicable international trade and anti-corruption laws, or that our employees or channel partners will strictly follow all policies and requirements to which we subject them. Any alleged or actual violations of these laws may subject us to government scrutiny, investigation, debarment, and civil and criminal penalties, which may have an adverse effect on our results of operations, financial condition and reputation.
If there are significant disruptions in our information technology systems, our business, financial condition and operating results could be adversely affected.
The efficient operation of our business depends on our information technology systems like Oracle’s ERP and Microsoft 360 Office Platforms. We rely on our information technology systems to effectively manage sales and marketing data, accounting and financial functions, inventory management, product development tasks, research and development data, customer service and technical support functions. Our information technology systems are vulnerable to damage or interruption from earthquakes, fires, floods and other natural disasters, terrorist attacks, attacks by computer viruses or hackers, power losses, and computer system or data network failures. In addition, our data management application is hosted by a third-party service provider whose security and information technology systems are subject to similar risks, and our products’ systems contain software which could be subject to computer virus or hacker attacks or other failures.
The failure of our or our service providers’ information technology systems or our products’ software to perform as we anticipate or our failure to effectively implement new information technology systems could disrupt our entire operation or adversely affect our software products and could result in decreased sales, increased overhead costs, and product shortages, all of which could have a material adverse effect on our reputation, business, financial condition, and operating results.
If we fail to properly manage our anticipated growth, our business could suffer.
Our growth and product expansion has placed, and we expect that it will continue to place, a significant strain on our management team and on our financial resources. Failure to manage our growth effectively could cause us to misallocate management or financial resources, and result in losses or weaknesses in our infrastructure, which could materially adversely affect our business. Additionally, our anticipated growth will increase the demands placed on our suppliers, resulting in an increased need for us to manage our suppliers and monitor for quality assurance. Any failure by us to manage our growth effectively could have an adverse effect on our ability to achieve our business objectives.
We are highly dependent on the knowledge and skills of our global leadership team , and if we are not successful in attracting and retaining highly qualified personnel, we may not be able to successfully implement our business strategy.
Our ability to continue to lead in this fragmented industry depends upon our ability to attract, develop and retain highly qualified managerial, scientific, sales and medical personnel. We are highly dependent on our global leadership team and have benefited substantially from the leadership and performance of our global leadership team. The loss of the services of any of our executive officers and other key global leadership team member, and our inability to find suitable replacements could result in delays in product development and harm the smooth operation of our business.
DIH’s management team has limited experience managing a public company.
Members of our management team have limited experience managing a publicly traded company, interacting with public company investors, and complying with the increasingly complex laws pertaining to public companies. We may not successfully or efficiently manage our transition to being a public company that is subject to significant regulatory oversight and reporting obligations under the federal securities laws and the continuous scrutiny of securities analysts and investors. These new obligations and constituents will require significant attention from our senior management and could divert their attention away from the day-to-day management of our business, which could harm our business, results of operations, and financial condition.
We have identified material weaknesses in our internal control over financial reporting. These material weaknesses could continue to adversely affect our ability to report our results of operations and financial condition accurately and in a timely manner.
Our management is responsible for establishing and maintaining adequate internal control over financial reporting designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP. Our management is likewise required to evaluate the effectiveness of our internal controls and to disclose any changes and material weaknesses identified through such evaluation in those internal controls. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.
We identified a material weakness in our internal control over financial reporting due to (i) the insufficiency of technical accounting resources with an appropriate level of technical knowledge and ability to properly prepare and review financial information for timely and accurate filings in accordance with US GAAP (ii) adequate staffing within our information technology (“IT”) department to properly demonstrate general IT review and monitoring controls over the IT environment and (iii) controls over management override and monitoring of the effectiveness of such controls.
Any failure to maintain such internal control could adversely impact our ability to report our financial position and results from operations on a timely and accurate basis. If our financial statements are not accurate, investors may not have a complete understanding of our operations. Likewise, if our financial statements are not filed on a timely basis, we could be subject to sanctions or investigations by Nasdaq or any other exchange on which our Common Stock are listed, the SEC or other regulatory authorities. In either case, there could result a material adverse effect on our business. Ineffective internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of the Common Stock.
